Guillermo Benítez

The Chemistry of the Sulfur–Gold Interface: In Search of a Unified Model

Over the last three decades, self-assembled molecular films on solid surfaces have attracted widespread interest as an intellectual and technological challenge to chemists, physicists, materials scientists, and biologists. A variety of technological applications of nanotechnology rely on the possibility of controlling topological, chemical, and functional features at the molecular level. Self-assembled monolayers (SAMs) composed of chemisorbed species represent fundamental building blocks for creating complex structures by a bottom-up approach. These materials take advantage of the flexibility of organic and supramolecular chemistry to generate synthetic surfaces with well-defined chemical and physical properties. These films already serve as structural or functional parts of sensors, biosensors, drug-delivery systems, molecular electronic devices, protecting capping for nanostructures, and coatings for corrosion protection and tribological applications. Thiol SAMs on gold are the most popular molecular films because the resulting oxide-free, clean, flat surfaces can be easily modified both in the gas phase and in liquid media under ambient conditions. In particular, researchers have extensively studied SAMs on Au(111) because they serve as model systems to understand the basic aspects of the self-assembly of organic molecules on well-defined metal surfaces. Also, great interest has arisen in the surface structure of thiol-capped gold nanoparticles (AuNPs) because of simple synthesis methods that produce highly monodisperse particles with controllable size and a high surface/volume ratio. These features make AuNPs very attractive for technological applications in fields ranging from medicine to heterogeneous catalysis. In many applications, the structure and chemistry of the sulfur-gold interface become crucial since they control the system properties. Therefore, many researchers have focused on understanding of the nature of this interface on both planar and nanoparticle thiol-covered surfaces. However, despite the considerable theoretical and experimental efforts made using various sophisticated techniques, the structure and chemical composition of the sulfur-gold interface at the atomic level remains elusive. In particular, the search for a unified model of the chemistry of the S-Au interface illustrates the difficulty of determining the surface chemistry at the nanoscale. This Account provides a state-of-the-art analysis of this problem and raises some questions that deserve further investigation.

Surface characterization of sulfur and alkanethiol self-assembled monolayers on Au(111)

In the last two decades surface science techniques have decisively contributed to our present knowledge of alkanethiol self-assembled monolayers (SAMs) on solid surfaces. These organic layers have been a challenge for surface scientists, in particular because of the soft nature of the organic material (which can be easily damaged by irradiation), the large number of atoms present in the molecules, and the complex physical chemistry involved in the self-assembly process. This challenge has been motivated by the appealing technological applications of SAMs that cover many fields of the emerging area of nanotechnology. Sulfur (S) is closely related to alkanethiols and can be used to understand basic aspects of the surface structure of SAMs. In this review we focus on the atomic/molecular structures of S-containing SAMs on Au(111). Particular emphasis is given to the substrate, adsorption sites, chemical state of the S–metal bond and also to the experimental and theoretical tools used to study these structures at the atomic or molecular levels.

Spontaneous adsorption of silver nanoparticles on Ti/TiO2 surfaces. Antibacterial effect on Pseudomonas aeruginosa

Titanium is a corrosion-resistant and biocompatible material widely used in medical and dental implants. Titanium surfaces, however, are prone to bacterial colonization that could lead to infection, inflammation, and finally to implant failure. Silver nanoparticles (AgNPs) have demonstrated an excellent performance as biocides, and thus their integration to titanium surfaces is an attractive strategy to decrease the risk of implant failure. In this work a simple and efficient method is described to modify Ti/TiO(2) surfaces with citrate-capped AgNPs. These nanoparticles spontaneously adsorb on Ti/TiO(2), forming nanometer-sized aggregates consisting of individual AgNPs that homogeneously cover the surface. The modified AgNP-Ti/TiO(2) surface exhibits a good resistance to colonization by Pseudomonas aeruginosa, a model system for biofilm formation.

Enhanced Stability of Thiolate Self-Assembled Monolayers (SAMs) on Nanostructured Gold Substrates

Degradation of thiolate self-assembled monolayers (SAMs) in ambient conditions and liquid environments seriously limits the fabrication of thiol-based devices. Here, we demonstrate that nanostructured gold exhibits higher resistance to SAM degradation and increased electrochemical stability against thiolate desorption in relation to polycrystalline preferred oriented Au(111). The increased stability can be related to the presence of a large number of defects, such as adatoms, vacancies, and steps where the thiolate binding energy is stronger than at terraces. The nanostructured Au is an interesting platform because it can be easily prepared, has surface enhanced Raman spectroscopy (SERS) activity, and exhibits a high signal/noise ratio for amperometric detection because of its large real surface area.

Self-assembly of alkanedithiols on Au(111) from solution: effect of chain length and self-assembly conditions.

A comparative study on the adsorption of buthanedithiol (BDT), hexanedithiol (HDT), and nonanedithiol (NDT) on Au(111) from ethanolic and n-hexane solutions and two different preparation procedures is presented. SAM characterization is based on reflection-absorption infrared spectroscopy, electrochemistry, X-ray photoelectron spectroscopy, and time of flight direct recoil spectroscopy. Results indicate that one can obtain a standing-up phase of dithiols and that the amount of the precursor lying-down phase decreases from BDT to NDT, irrespective of the solvent and self-assembly conditions. A good ordering of the hydrocarbon chains in the standing-up configuration is observed for HDT and NDT when the system is prepared in degassed n-hexane with all operations carried out in the dark. Disulfide bridges at the free SH terminal groups are formed for HDT and to a lesser extent for NDT prepared in ethanol in the presence of oxygen, but we found no evidence of ordered multilayer formation in our experiments. No disulfides were observed for BDT that only forms the lying-down phase. Our results demonstrate the key role of the chain length and the procedure (solvent nature and oxygen presence) in controlling the surface structure and chemistry of SAMs dithiols on Au(111).

Self-assembled monolayers of thiolates on metals: a review article on sulfur-metal chemistry and surface structures

A review article on fundamental aspects of thiolate self-assembled monolayers (SAMs) on the (111) and (100) surfaces of the Cu and Ni groups is presented. In particular this work is focused on two important points that remain poorly understood in most of these metals: the chemistry of the S-metal interface, which strongly depends on the nature of the metallic surface, and the role of the interaction forces that not only guide the self-assembly process but also influence the surface structure of SAMs. In addition to recent experimental and theoretical data on these issues we present new density functional calculations including van der Waals forces for an important number of known thiolate surface structures as a function of the hydrocarbon chain length.

Thiol-capped gold: from planar to irregular surfaces

Thiol-capped metals, in particular gold, have a wide range of technological applications, especially for building systems by bottom-up methods. In most cases, stability of the organic film during exposure to ambient conditions and/or to electrolyte solutions is a crucial requirement. In this work we discuss the stability of butanethiol self-assembled monolayers (SAMs) on planar, nanocurved and irregular Au surfaces against both air exposure and electrodesorption in aqueous media. We have found a slower rate of air oxidation and increased stability against electrodesorption for butanethiol monolayers on highly irregular Au surfaces as compared to those on planar surfaces. The increased stability of SAMs on highly irregular surfaces is promising because desorption and degradation seriously limit their application in nanotechnology.

Synthesis and characterization of gold at gold(i)-thiomalate core at shell nanoparticles.

In this paper, the synthesis of gold at gold(I)-thiolate core at shell nanoparticles is described for the first time. The chemical nature and structure of these nanoparticles were characterized by a multi-technique approach. The prepared particles consist of gold metallic cores, about 1 nm in size, surrounded by stable gold(I)-thiomalate shells (Au at Au(I)-TM). These nanoparticles could be useful in medicine due to the interesting properties that gold(I)-thiomalate has against rheumatoid arthritis. Furthermore, the described results give new insights in the synthesis and characterization of metallic and core at shell nanoparticles.

Complex Surface Chemistry of 4-Mercaptopyridine Self-Assembled Monolayers on Au(111)

The adsorption of 4-mercaptopyridine on Au(111) from aqueous or ethanolic solutions is studied by different surface characterization techniques and density functional theory calculations (DFT) including van der Waals interactions. X-ray photoelectron spectroscopy and electrochemical data indicate that self-assembly from 4-mercaptopyridine-containing aqueous 0.1 M NaOH solutions for short immersion times (few minutes) results in a 4-mercaptopyridine (PyS) self-assembled monolayer (SAM) with surface coverage 0.2. Scanning tunneling microscopy images show an island-covered Au surface. The increase in the immersion time from minutes to hours results in a complete SAM degradation yielding adsorbed sulfur and a heavily pitted Au surface. Adsorbed sulfur is also the main product when the self-assembly process is made in ethanolic solutions irrespective of the immersion time. We demonstrate for the first time that a surface reaction is involved in PyS SAM decomposition in ethanol, a surface process not favored in water. DFT calculations suggest that the surface reaction takes place via disulfide formation driven by the higher stability of the S-Au(111) system. Other reactions that contribute to sulfidization are also detected and discussed.

Thiol with an unusual adsorption-desorption behavior: 6-mercaptopurine on Au(111).

A multitechnique study of 6-mercaptopurine (6MP) adsorption on Au(111) is presented. The molecule adsorbs on Au(111), originating short-range ordered domains and irregular nanosized aggregates with a total surface coverage by chemisorbed species smaller than those found for alkanethiol SAMs, as derived from scanning tunneling microscopy (STM) and electrochemical results. X-ray photoelectron spectroscopy (XPS) results show the presence of a thiolate bond, whereas density functional theory (DFT) data indicate strong chemisorption via a S-Au bond and additional binding to the surface via a N-Au bond. From DFT data, the positive charge on the Au topmost surface atoms is markedly smaller than that found for Au atoms in alkanethiolate SAMs. The adsorption of 6MP originates Au atom removal from step edges but no vacancy island formation at (111) terraces. The small coverage of Au islands after 6MP desorption strongly suggests the presence of only a small population of Au adatom-thiolate complexes. We propose that the absence of the Au-S interface reconstruction results from the lack of significant repulsive forces acting at the Au surface atoms.