Gulden Gokcen

Overview of Kizildere Geothermal Power Plant in Turkey

Abstract Achieving sustainable development is a target that is now widely seen as important in worldwide public opinion. In this context, the utilization of renewable energy resources such as solar, geothermal and wind energy appears to be one of the most efficient and effective ways of achieving this target. Recently, power generation from geothermal energy has become of big importance in Turkey, which is located on the Mediterranean sector of the Alpine-Himalayan Tectonic Belt and is among the first seven countries in abundance of geothermal resources around the world. The main objective in doing the present study is twofold, namely: (a) to investigate Turkey’s geothermal energy potential for power generation and (b) to overview the Denizli-Kizildere geothermal power plant (DKGPP) with an installed capacity of 20.4 MW e , which is at present the only operating geothermal power plant of Turkey. Based on the drilling data, which have been gathered to date, Turkey’s geothermal energy potential for power generation is determined to be 764.81 MW e . Electricity generation projections of Turkey are also 500 MW e from Germencik, Kizildere, Tuzla and several of the other fields by the year 2010 and 1000 MW e by 2020. The Denizli-Kizildere geothermal field has an estimated capacity of 200 MW e . The DKGPP was put into operation in 1984 and has been operated since then. It produced an electrical energy of 89,597 MWh in 2001, representing an electric power of 10.6 MW e in the same year. Present applications have shown that in Turkey, geothermal energy is a promising alternative and can make a significant contribution towards reducing the emission of greenhouse gases. As the public recognizes the projects, the progress will continue.

Geothermal Fields Suitable for Power Generation

Turkey is located on the Mediterranean sector of Alpine-Himalayan Tectonic Belt with many grabens, acidic volcanism, hydrothermal alteration zones, numerous hot springs and fumaroles. The data gathered since 1962 indicate that Turkey has a high geothermal energy potential. By comparison, it is among the first seven countries in abundance of geothermal resources around the world, while the share of its potential used is only about 2%. This means that considerable studies on geothermal energy could be conducted in order to increase energy supply and to reduce atmospheric pollution in Turkey. The main objective of the present study is threefold, namely: (1) to overview Turkeys geothermal fields suitable for power generation together with their possible utilization opportunities, (2) to present problems encountered and research projects developed in the Denizli-Kizildere geothermal field with an estimated capacity of 200 MWe and (3) to assess the current status of geothermal energy use for electric energy production in Turkey. The Denizli-Kizildere geothermal power plant with an installed capacity of 20.4 MWe, which is, at present, the only operating geothermal power plant of Turkey, was put into operation in 1984, while electricity from geothermal energy has been produced commercially since 1913. This plant produced on average an electrical energy of 84,920 MWh in the period between 1998–2001, representing an average electric power of 10.45 MWe in the same period. Parallel to the development of the geothermal energy utilization in the country, it is projected that, by the years 2010 and 2020, the total geothermal power installed capacity will increase to 500 MWe and 1000 MWe, respectively.

Exergy analysis and performance evaluation of Kizildere Geothermal Power Plant, Turkey

Conventional geothermal power plants (GPP) differ from fossil-fuel power plants (FFPP) in many ways. The most specific ones are that GPPs are not cyclic plants and the working fluid is not pure steam. Geothermal steam contains non-condensable gases (NCG) which degrade power plant efficiency. This discrepancy leads to two considerations in energy and exergy analysis of GPPs. One is that the amount of NCGs in the steam cannot be omitted during the calculations; the other is that the dead state composition varies throughout the process. In this work, energy and exergy analysis is conducted to assess the performance of Kizildere GPP under both considerations. The net second law efficiencies of the plant based on reservoir and wellhead exergy are 24.3 and 27.2% respectively. Both indicate that the plant performance is low comparing with the other single-flash GPPs and FFPPs. The losses are mainly associated with high NCG content and low steam fraction of the fluid.

Modeling of Low Temperature Geothermal District Heating Systems

Abstract In this work, low temperature geothermal district heating systems with heat pumps have been studied and compared with fuel-oil boiler heating systems for intermittent and continuous regimes according to the optimum indoor air temperature and operational cost. Izmir Institute of Technology (IZTECH) Campus is taken as a case study. Various heat pump and boiler configurations are studied to meet required duty. Operational cost analysis for each alternative is conducted. According to the results, for IZTECH Campus the best alternative, which gives the optimum indoor air temperature and the lowest operational cost, is heat pump continuous regime. #Contributed by the Organizing Committee for the First International Exergy, Energy and Environment Symposium (IEEES-1). Paper presented at IEEES-1, Izmir, Turkey, 13–17 July 2003. Manuscript received by IJGE on 2003-12-23; final revision received on 2004-03-17. Corresponding guest editors: I. Dincer and A. Hepbasli.

Effect of Non-Condensable Gases on geothermal power plant performance. Case study: Kizildere Geothermal Power Plant-Turkey

Non-Condensable Gases (NCGs) are natural components of geothermal fluids, and they are a source of considerable capital and operating costs for power plants. The NCG content of geothermal steam varies over the world from almost zero to as much as 25% (wt). In this work, the influence of NCGs on the thermodynamic performance of geothermal power plants is analysed for various NCG content and turbine inlet temperatures. The results obtained can be useful on the feasibility study of single flash geothermal power plants. Depending on the NCG content of the field, the performance of the power plant can be determined roughly.