Guoqing Lin

NPP VIIRS Geometric Performance Status

Visible Infrared Imager Radiometer Suite (VIIRS) instrument on-board the National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP) satellite is scheduled for launch in October, 2011. It is to provide satellite measured radiance/reflectance data for both weather and climate applications. Along with radiometric calibration, geometric characterization and calibration of Sensor Data Records (SDRs) are crucial to the VIIRS Environmental Data Record (EDR) algorithms and products which are used in numerical weather prediction (NWP). The instrument geometric performance includes: 1) sensor (detector) spatial response, parameterized by the dynamic field of view (DFOV) in the scan direction and instantaneous FOV (IFOV) in the track direction, modulation transfer function (MTF) for the 17 moderate resolution bands (M-bands), and horizontal spatial resolution (HSR) for the five imagery bands (I-bands); 2) matrices of band-to-band co-registration (BBR) from the corresponding detectors in all band pairs; and 3) pointing knowledge and stability characteristics that includes scan plane tilt, scan rate and scan start position variations, and thermally induced variations in pointing with respect to orbital position. They have been calibrated and characterized through ground testing under ambient and thermal vacuum conditions, numerical modeling and analysis. This paper summarizes the results, which are in general compliance with specifications, along with anomaly investigations, and describes paths forward for characterizing on-orbit BBR and spatial response, and for improving instrument on-orbit performance in pointing and geolocation.

SNPP VIIRS Spectral Bands Co-Registration and Spatial Response Characterization

The Visible Infrared Imager Radiometer Suite (VIIRS) instrument onboard the Suomi National Polar‐orbiting Partnership (SNPP) satellite was launched on 28 October 2011. The VIIRS has 5 imagery spectral bands (I-bands), 16 moderate resolution spectral bands (M-bands) and a panchromatic day/night band (DNB). Performance of the VIIRS spatial response and band-to-band co-registration (BBR) was measured through intensive pre-launch tests. These measurements were made in the non-aggregated zones near the start (or end) of scan for the I-bands and M-bands and for a limited number of aggregation modes for the DNB in order to test requirement compliance. This paper presents results based on a recently re-processed pre-launch test data. Sensor (detector) spatial impulse responses in the scan direction are parameterized in terms of ground dynamic field of view (GDFOV), horizontal spatial resolution (HSR), modulation transfer function (MTF), ensquared energy (EE) and integrated out-of-pixel (IOOP) spatial response. Results are presented for the non-aggregation, 2-sample and 3-sample aggregation zones for the I-bands and M-bands, and for a limited number of aggregation modes for the DNB. On-orbit GDFOVs measured for the 5 I-bands in the scan direction using a straight bridge are also presented. Band-to-band co-registration (BBR) is quantified using the prelaunch measured band-to-band offsets. These offsets may be expressed as fractions of horizontal sampling intervals (HSIs), detector spatial response parameters GDFOV or HSR. BBR bases on HSIs in the non-aggregation, 2-sample and 3-sample aggregation zones are presented. BBR matrices based on scan direction GDFOV and HSR are compared to the BBR matrix based on HSI in the non-aggregation zone. We demonstrate that BBR based on GDFOV is a better representation of footprint overlap and so this definition should be used in BBR requirement specifications. We propose that HSR not be used as the primary image quality indicator, since we show that it is neither an adequate representation of the size of sensor spatial response nor an adequate measure of imaging quality.

Measurement of the Band-to-Band Registration of the SNPP VIIRS Imaging System From On-Orbit Data

The visible infrared imaging radiometer suite (VIIRS) instrument onboard the Suomi National Polar-orbiting Partnership (SNPP) satellite was launched on October 28, 2011. The VIIRS instrument is a whiskbroom system with 22 spectral and thermal bands split between 16 moderate resolution bands (M-bands), 5 imagery resolution bands (I-bands), and a day–night band. In this study, we measure the along-scan and along-track band-to-band registration between the I-bands and M-bands from on-orbit data. This measurement is performed by computing the normalized mutual information (NMI) between shifted image band pairs and finding the amount of shift required (if any) to produce the peak in NMI value. Subpixel accuracy is obtained by utilizing a bicubic interpolation. The product of the NMI peak slope and the NMI peak value is shown to be a better criterion for evaluating the quality of the NMI result than just the NMI peak value. Registration shifts are found to be similar to prelaunch measurements and stable (within measurement error) over the instruments first four years in an orbit.

MODIS and VIIRS geometric performance comparison

The VIIRS instrument was launched on the NASA/NOAA Suomi NPP satellite in October 2011. This instrument is the first of a series of VIIRS instruments meant to continue the operational and long-term measurements of NASA, NOAA and DOD heritage instruments such as the MODIS instruments on the NASA EOS Terra and Aqua satellites and other. The VIIRS Sensor Data Record product recently achieved Beta Maturity in geometric and radiometric performance after the initial on-orbit instrument characterization and calibration. In this paper, we compare MODIS and VIIRS instruments geometric characteristics and geolocation accuracy. This VIIRS geometric characterization is on-going and the product to be much more mature by the end of the year. At this time, the MODIS and VIIRS instruments have different but comparable geometric performance and that the VIIRS geometric characteristics will enable it to fulfill the mission objectives.

JPSS-1/NOAA-20 VIIRS early on-orbit geometric performance.

The first NOAA/NASA Join Polar Satellite System (JPSS-1) satellite was successfully launched on November 18, 2017, becoming NOAA-20. Instruments on-board NOAA-20 satellite include the Visible Infrared Imaging Radiometer Suite (VIIRS). This instrument is the second build of VIIRS, with the first flight instrument on-board NASA/NOAA Suomi National Polar-orbiting Partnership (SNPP) satellite operating since October 2011. The purpose of these VIIRS instruments is to continue the long-term measurements of biogeophysical variables for multiple applications including weather forecasting, rapid response and climate research. The geometric performance of VIIRS is essential to retrieving accurate biogeophysical variables. This paper describes the early on-orbit geometric performance of the JPSS-1/NOAA-20 VIIRS. It first discusses the on-orbit orbit and attitude performance, a key input needed for accurate geolocation. It then discusses the on-orbit geometric characterization and calibration of VIIRS geometry and an initial assessment of the geometric accuracy. This section includes a discussion of an improvement in the geometric model that corrects small geometrical artifacts that appear in the along-scan direction. Finally, this paper discusses on-orbit measurements of the focal length and the impact of this on the scan-to-scan underlap/overlap.

JPSS-1 VIIRS at-launch geometric performance

Following the successful operations of the first Visible Infrared Imaging Radiometer Suite (VIIRS) instrument on-board the Suomi National Polar‐orbiting Partnership (SNPP) spacecraft since launch in October 2011, a second VIIRS instrument to be on-board the first Joint Polar Satellite System (JPSS-1) satellite has been fabricated, tested and integrated onto the spacecraft, readying for launch in 2017. The ground testing, including geometric functional performance testing and characterization, at the sensor level was completed in December 2014. Testing at the spacecraft level is on-going. The instrument geometric performance includes sensor (detector) spatial response, band-to-band coregistration (BBR), scan plane and pointing stability. The parameters have been calibrated and characterized through ground testing under ambient and thermal vacuum conditions, and numerical modeling and analysis. VIIRS sensor spatial response is measured by line spread functions (LSFs) in the scan and track directions for every detector. We parameterize the LSFs by: 1) dynamic field of view (DFOV) in the scan direction and instantaneous FOV (IFOV) in the track direction; and 2) modulation transfer function (MTF) for the 17 moderate resolution bands (M-bands) and for the five imagery bands (I-bands). We define VIIRS BBR for M-bands and I-bands as the overlapped fractional area of angular pixel sizes from the corresponding detectors in a band pair, including nested I-bands within the M-bands. The ground tests result in static BBR matrices. VIIRS pointing measurements include scan plane tilt and instrument-to-spacecraft mounting coefficients. This paper summarizes the pre-launch test results along with anomaly investigations. The pre-launch performance parameters will be tracked or corrected for as needed in on-orbit operations.