Gustaf D. Olsson

Rational design of biomimetic molecularly imprinted materials: theoretical and computational strategies for guiding nanoscale structured polymer development

In principle, molecularly imprinted polymer science and technology provides a means for ready access to nano-structured polymeric materials of predetermined selectivity. The versatility of the technique has brought it to the attention of many working with the development of nanomaterials with biological or biomimetic properties for use as therapeutics or in medical devices. Nonetheless, the further evolution of the field necessitates the development of robust predictive tools capable of handling the complexity of molecular imprinting systems. The rapid growth in computer power and software over the past decade has opened new possibilities for simulating aspects of the complex molecular imprinting process. We present here a survey of the current status of the use of in silico-based approaches to aspects of molecular imprinting. Finally, we highlight areas where ongoing and future efforts should yield information critical to our understanding of the underlying mechanisms sufficient to permit the rational design of molecularly imprinted polymers.

Mechanisms underlying molecularly imprinted polymer molecular memory and the role of crosslinker: resolving debate on the nature of template recognition in phenylalanine anilide imprinted polymers

A series of molecular dynamics simulations of prepolymerization mixtures for phenylalanine anilide imprinted co‐(ethylene glycol dimethacrylate‐methacrylic acid) molecularly imprinted polymers have been employed to investigate the mechanistic basis for template selective recognition in these systems. This has provided new insights on the mechanisms underlying template recognition, in particular the significant role played by the crosslinking agent. Importantly, the study supports the occurrence of template self‐association events that allows us to resolve debate between the two previously proposed models used to explain this systems underlying recognition mechanisms. Moreover, the complexity of the molecular level events underlying template complexation is highlighted by this study, a factor that should be considered in rational molecularly imprinted polymer design, especially with respect to recognition site heterogeneity. Copyright

On the Influence of Crosslinker on Template Complexation in Molecularly Imprinted Polymers: A Computational Study of Prepolymerization Mixture Events with Correlations to Template-Polymer Recognition Behavior and NMR Spectroscopic Studies

Aspects of the molecular-level basis for the function of ethylene glycol dimethacrylate and trimethylolproprane trimethacrylate crosslinked methacrylic acid copolymers molecularly imprinted with (S)-propranolol have been studied using a series of all-component and all-atom molecular dynamics studies of the corresponding prepolymerization systems. The crosslinking agents were observed to contribute to template complexation, and the results were contrasted with previously reported template-recognition behavior of the corresponding polymers. Differences in the extent to which the two crosslinkers interacted with the functional monomer were identified, and correlations were made to polymer-ligand recognition behavior and the results of nuclear magnetic resonance spectroscopic studies studies. This study demonstrates the importance of considering the functional monomer–crosslinker interaction when designing molecularly imprinted polymers, and highlights the often neglected general contribution of crosslinker to determining the nature of molecularly imprinted polymer-template selectivity.

An Artificial Estrogen Receptor through Combinatorial Imprinting

Polymeric sorbents targeting endocrine-disrupting estrogen active compounds (EAC) were prepared by terpolymer imprinting using 17β-estradiol (E2) as template. From a group of eight functional monomers representing Brønsted acids, bases, hydrogen-bond donors and acceptors, as well as π-interacting monomers, a terpolymer library that comprises all possible binary combinations of the functional monomers was prepared. Binding tests revealed that imprinted polymers exhibit a markedly higher affinity for E2 compared to nonimprinted polymers (NIPs) or polymers prepared by using single functional monomers. A combination of methacrylic acid (MAA) and p-vinylbenzoic acid offered a particularly promising lead polymer, displaying an imprinting factor of 17 versus 2.4 for a benchmark polymer prepared by using only MAA as functional monomer. The saturation capacities ascribed to imprinted sites were four to five times higher for this polymer compared to previously reported imprinted polymers. NMR titrations and molecular dynamics simulations corroborated these results, indicating an orthogonal preference of the two functional monomers with respect to the E2 3-OH and 17-OH groups. The optimized polymer exhibited a retentivity for EACs that correlates with their inhibitory effect on the natural receptor. By using the optimized molecularly imprinted polymers (MIPs) in a model water-purification system, they were capable of completely removing ppb levels of a small group of EACs from water. This is in contrast to the performance of nonimprinted polymers and well-established sorbents for water purification (e.g., active carbon), which still contained detectable amounts of the compounds after treatment.

How warfarin's structural diversity influences its phospholipid bilayer membrane permeation.

The role of the structural diversity of the widely used anticoagulant drug warfarin on its distribution in 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) bilayer membranes was investigated using a series of both restrained (umbrella sampling) and unrestrained molecular dynamics simulations. Data collected from unrestrained simulations revealed favorable positions for neutral isomers of warfarin, the open side chain form (OCO), and the cyclic hemiketal (CCO), along the bilayer normal close to the polar headgroup region and even in the relatively distant nonpolar lipid tails. The deprotonated open side chain form (DCO) was found to have lower affinity for the DOPC bilayer membrane relative to the neutral forms, with only a small fraction interacting with the membrane, typically within the polar headgroup region. The conformation of OCO inside the lipid bilayer was found to be stabilized by intramolecular hydrogen bonding thereby mimicking the structure of CCO. Differences in free energies, for positions of OCO and CCO inside the bilayer membrane, as compared to positions in the aqueous phase, were -97 and -146 kJ·mol(-1). Kinetic analysis based on the computed free energy barriers reveal that warfarin will diffuse through the membranes within hours, in agreement with experimental results on warfarins accumulation in the plasma, thus suggesting a passive diffusion mechanism. We propose that this membrane transport may be an isomerization-driven process where warfarin adapts to the various local molecular environments encountered under its journey through the membrane. Collectively, these results improve our understanding of the influence of warfarins structural diversity on the drugs distribution and bioavailability, which in turn may provide insights for developing new formulations of this important pharmaceutical to better address its narrow therapeutic window.

Theoretical and Computational Strategies for the Study of the Molecular Imprinting Process and Polymer Performance

The development of in silico strategies for the study of the molecular imprinting process and the properties of molecularly imprinted materials has been driven by a growing awareness of the inherent complexity of these systems and even by an increased awareness of the potential of these materials for use in a range of application areas. Here we highlight the development of theoretical and computational strategies that are contributing to an improved understanding of the mechanisms underlying molecularly imprinted material synthesis and performance, and even their rational design.

Synthetic Neuraminidases : Nanostructured Materials for Environmental Monitoring

The following abstracts are listed by Theme and corresponding sub-Theme. Abstracts are organized within sub-Theme alphabetically by the last name of abstract presenter as of 01 December 2010. 2011 International Association for Ecology and Health While Australia is not as dependent on agricultural production as it once was, animal industries still play a crucial role in maintaining the strength of Australia’s economy and promoting our high level of food security. Australians also continue to have a great deal of interaction with animals and, therefore, face high levels of exposure to any diseases they may carry. Looking to our international region, many countries are more sensitive to food security issues, outbreaks of high-impact transboundary animal diseases and diseases which suppress animal production. These diseases pose a direct threat to their food security by affecting nutrition as well as the income of rural communities dependent on livestock. Unfortunately, with the combined effects of trade globalisation, increased human mobility, global climate changes, and demographic and land use changes, the risks of animal disease epidemics are increasing. Continual advances in veterinary science and the efforts of international bodies such as the OIE and FAO position us well to face these new challenges, but these efforts must be sustained to ensure the welfare of all.Climatic conditions in Australia are erratic and characterised by periods of intense rainfall followed by periods of intense drought. This has considerable impact on the population dynamics and ecology of many Australian species of waterfowl, which are thought to form the reservoir of avian influenza viruses (AIV) but may also be important carriers (and possibly reservoirs) of other diseases (e.g. bursal disease, Newcastle disease). During the wet, waterfowl numbers increase with many serologically naive juveniles entering the population. During the subsequent period of drought, bird densities increase in the few remaining wetlands. We hypothesise that it is during this period of increasing densities of naive birds that the population’s viral prevalence of some infectious diseases may increase dramatically. Indeed, there exists a remarkable and suggestive coincidence between outbreaks of fowl plaque and Newcastle disease in Australian poultry farms and the periods of drought following a very wet period. In other words, we suspect a link between increased risk for disease outbreaks in poultry farms and the hypothesised high in the prevalences of the viruses causing these diseases in waterfowl. Given that poultry farms may provide ideal conditions for development of high-pathogenic strains, there is also a reciprocal risk for wildlife involved during these periods.