Gwi Nam Bae

Monitoring multiwalled carbon nanotube exposure in carbon nanotube research facility.

With the increased production and widespread use of multiwalled carbon nanotubes (MWCNTs), human and environmental exposure to MWCNTs is inevitably increasing. Therefore, this study monitored the possible exposure to MWCNT release in a carbon nanotube research laboratory. To estimate the potential exposure of researchers and evaluate the improvement of the workplace environment after the implementation of protective control measures, personal and area monitoring were conducted in an MWCNT research facility where the researchers handled unrefined materials. The number, composition, and aspect ratio of MWCNTs were measured using scanning transmission electron microscopy with an energy-dispersive x-ray analyzer. The gravimetric concentrations of total dust before any control measures ranged from 0.21 to 0.43 mg/m3, then decreased to a nondetectable level after implementing the control measures. The number of MWCNTs in the samples obtained from the MWCNT blending laboratory ranged from 172.9 to 193.6 MWCNTs/cc before the control measures, and decreased to 0.018–0.05 MWCNTs/cc after the protective improvements. The real-time monitoring of aerosol particles provided a signature of the MWCNTs released from the blending equipment in laboratory C. In particular, the number size response of an aerodynamic particle sizer with a relatively high concentration in the range of 2 to 3 μ m in aerodynamic diameter revealed the evidence of MWCNT exposure. The black carbon mass concentration also increased significantly during the MWCNT release process. Therefore, the present study suggests that the conventional industrial hygiene measures can significantly reduce exposure to airborne MWCNTs and other particulate materials in a nano research facility.

Exposure assessment of carbon nanotube manufacturing workplaces

Seven CNT (carbon nanotube) handling workplaces were investigated for exposure assessment. Personal sampling, area sampling, and real-time monitoring using an SMPS (scanning mobility particle sizer), dust monitor, and aethalometer were performed to characterize the mass exposure, particle size distribution, and particle number exposure. No workplace was found to exceed the current ACGIH (American Conference of Governmental Industrial Hygienists) TLVs (threshold limit values) and OELs (occupational exposure levels) set by the Korean Ministry of Labor for carbon black (3.5 mg/m3), PNOS (particles not otherwise specified; 3 mg/m3), and asbestos (0.1 fiber/cc). Nanoparticles and fine particles were most frequently released after opening the CVD (chemical vapor deposition) cover, followed by catalyst preparation. Other work processes that prompted nanoparticle release included spraying, CNT preparation, ultrasonic dispersion, wafer heating, and opening the water bath cover. All these operation processes could be effectively controlled with the implementation of exposure mitigation, such as engineering control, except at one workplace where only natural ventilation was used.

Preparation of airborne Ag/CNT hybrid nanoparticles using an aerosol process and their application to antimicrobial air filtration.

Carbon nanotubes (CNTs) have been widely used in a variety of applications because of their unique structure and excellent mechanical and electrical properties. Additionally, silver (Ag) nanoparticles exhibit broad-spectrum biocidal activity toward many different bacteria, fungi, and viruses. In this study, we prepared Ag-coated CNT hybrid nanoparticles (Ag/CNTs) using aerosol nebulization and thermal evaporation/condensation processes and tested their usefulness for antimicrobial air filtration. Droplets were generated from a CNT suspension using a six-jet collison nebulizer, passed through a diffusion dryer to remove moisture, and entered a thermal tube furnace where silver nanoparticles were generated by thermal evaporation/condensation at ∼980 °C in a nitrogen atmosphere. The CNT and Ag nanoparticle aerosols mixed together and attached to each other, forming Ag/CNTs. For physicochemical characterization, the Ag/CNTs were introduced into a scanning mobility particle sizer (SMPS) for size distribution measurements and were sampled by the nanoparticle sampler for morphological and elemental analyses. For antimicrobial air filtration applications, the airborne Ag/CNT particles generated were deposited continuously onto an air filter medium. Physical characteristics (fiber morphology, pressure drop, and filtration efficiency) and biological characteristics (antimicrobial tests against Staphylococcus epidermidis and Escherichia coli bioaerosols) were evaluated. Real-time SMPS and transmission electron microscopy (TEM) data showed that Ag nanoparticles that were <20 nm in diameter were homogeneously dispersed and adhered strongly to the CNT surfaces. Because of the attachment of Ag nanoparticles onto the CNT surfaces, the total particle surface area concentration measured by a nanoparticle surface area monitor (NSAM) was lower than the summation of each Ag nanoparticle and CNT generated. When Ag/CNTs were deposited on the surface of an air filter medium, the antimicrobial activity against test bacterial bioaerosols was enhanced, compared with the deposition of CNTs or Ag nanoparticles alone, whereas the filter pressure drop and bioaerosol filtration efficiency were similar to those of CNT deposition only. At a residence time of 2 h, the relative microbial viabilities of gram-positive S. epidermidis were ∼32, 13, 5, and 0.9% on the control, CNT-, Ag nanoparticle-, and Ag/CNT-deposited filters, respectively, and those of gram-negative E. coli were 13, 2.1, 0.4, and 0.1% on the control, CNTs, Ag nanoparticles, and Ag/CNTs, respectively. These Ag/CNT hybrid nanoparticles may be useful for applications in biomedical devices and antibacterial control systems.

Effect of particle loading on the collection performance of an electret cabin air filter for submicron aerosols

Electret filters are composed of permanently charged electret fibers and are widely used in applications requiring high collection efficiency and low-pressure drop. We tested electret filter media used in manufacturing cabin air filters by applying two different charging states to the test particles. These charging states were achieved by spray electrification through the atomization process and by bipolar ionization with an aerosol neutralizer, respectively. Polydisperse solid NaCl particles with 0.1%, and 1% solutions or liquid dicotyl sebacate (DOS) particles were generated from an atomizer, and they were loaded on the filter media. The amount of charge, the mean particle size, and the particle material significantly affected the collection performance of the electret filter media for submicron particles. The collection efficiency of the electret filter media degraded as more particles were loaded, and showed minimum efficiency at steady state. The electret filter media captured the highly charged particles more efficiently during the transient state. At steady state, the filter media loaded with smaller NaCl particles showed lower collection efficiency. The filter media loaded with liquid DOS particles showed collection efficiency much lower than those loaded with solid NaCl particles.

Electrospray-assisted ultraviolet aerodynamic particle sizer spectrometer for real-time characterization of bacterial particles.

The ultraviolet aerodynamic particle sizer (UVAPS) spectrometer is a novel, commercially available aerosol counter for real-time, continuous monitoring of viable bioaerosols based on the fluorescence induced from living microorganisms. For aerosolization of liquid-based microorganisms, general aerosolization methods such as atomization or nebulization may not be adequate for an accurate and quantitative characterization of the microorganisms because of the formation of agglomerated particles. In such cases, biological electrospray techniques have an advantage because they generate nonagglomerated particles, attributable to the repulsive electrical forces among particles with unipolar charges. Biological electrosprays are quickly gaining potential for the detection and control of living organisms in applications ranging from mass spectrometry to developmental microbiology. In this study, we investigated the size distribution, total concentration, and fluorescence percentage of bacterial particles in a real-time manner by electrospray-assisted UVAPS. A suspension containing Escherichia coli as a test microorganism was sprayed in a steady cone-jet mode using a specially designed electrospray system with a point-to-orifice-plate configuration based on charge-reduced electrospray size spectrometry. With the electrospray process, 98% of the total E. coli particle number concentration had a size of <1 mum and the geometric mean diameter was 0.779 mum, as compared with the respective values of 78% and 0.907 mum after nebulization. The fractions of fluorescence responsive particles and of particles that contained viable organisms in culture were 12% and 7%, respectively, from the electrospray process and 34% and 24% from nebulization. These results demonstrate that (1) the presence of agglomerated particles can lead to markedly overestimated fluorescence and culturability percentages compared with the values obtained from nonagglomerated particles, and (2) electrospray-assisted UVAPS can provide more accurate and quantitative real-time characterization of liquid-based microorganisms, owing to the generation of nonagglomerated particles.

Development and evaluation of antimicrobial activated carbon fiber filters using Sophora flavescens nanoparticles

Activated carbon fiber (ACF) filters have a wide range of applications, including air purification, dehumidification, and water purification, due to their large specific surface area, high adsorption capacity and rate, and specific surface reactivity. However, when airborne microorganisms such as bacteria and fungi adhere to the carbon substrate, ACF filters can become a source of microbial contamination, and their filter efficacy declines. Antimicrobial treatments are a promising means of preventing ACF bio-contamination. In this study, we demonstrate the use of Sophora flavescens in antimicrobial nanoparticles coated onto ACF filters. The particles were prepared using an aerosol process consisting of nebulization-thermal drying and particle deposition. The extract from S. flavescens is an effective, natural antimicrobial agent that exhibits antibacterial activity against various pathogens. The efficiency of Staphylococcus epidermidis inactivation increased with the concentration of S. flavescens nanoparticles in the ACF filter coating. The gas adsorption efficiency of the coated antimicrobial ACF filters was also evaluated using toluene. The toluene-removal capacity of the ACF filters remained unchanged while the antimicrobial activity was over 90% for some nanoparticle concentrations. Our results provide a scientific basis for controlling both bioaerosol and gaseous pollutants using antimicrobial ACF filters coated with S. flavescens nanoparticles.

The effect of man made source processes on the behavior of total gaseous mercury in air: A comparison between four urban monitoring sites in Seoul Korea

Concentrations of total gaseous mercury (TGM) were measured continuously at four urban residential locations (G (Guro-gu); N (Nowon-gu); S (Songpa-gu); and Y (Yongsan-gu)) in Seoul, Korea from 2004 to 2009. The mean concentrations of Hg at these sites were found on the order of N (3.98±1.68 ng m(-3)), S (3.87±1.56 ng m(-3)), G (3.80±1.60 ng m(-3)), and Y (3.36±1.55 ng m(-3)). Evidence indicates that the spatial distribution of Hg should be affected by the combined effects of both local anthropogenic (incineration facilities and thermal power plants) and natural (soil) emission sources in association with the meteorological parameters. Inspection of the Hg temporal patterns indicates the co-existence of contrasting seasonal patterns between the central site Y (winter dominance) and all other outbound sites near city borders (summer dominance). The long-term trend of Hg, if examined by combining our previous studies and the present one, shows that Hg levels in this urban area declined gradually across decadal periods despite slight variabilities in spatial scale: (1) above 10 ng m(-3) in the late 1980s, (2) ~5 ng m(-3) in the late 1990s, and (3) ~3 ng m(-3) toward the late 2000s. The results of the principal component analysis along with observed differences in seasonal patterns (between study sites) suggest that Hg distributions between different urban sites are greatly distinguishable with strong source signatures at each individual site.

Design and calibration of a 5-stage cascade impactor (K-JIST cascade impactor)

Abstract Particulate matter including PM10, PM2.5, and PM1 are one of the major concerns in the atmospheric environment. Due to the simplicity of their construction and use, and their relatively sharp cutoff characteristics, cascade impactors have been widely used for the size classification of particulate matter. In this study, a 5-stage cascade impactor (K-JIST cascade impactor) was designed and tested. Each stage of the impactor was calibrated using a gravimetric or counting method and the fully assembled impactor was evaluated by using a fluorometric method. Experimental data were fitted by non-linear regression using a newly suggested sigmoidal function, and stage response functions were obtained from the collection efficiency curves. Calibrated cut-point diameters were well matched with designed values with sufficient stiffness. Total wall losses, inlet sampling efficiency and the distribution of wall losses for each impactor stage were also evaluated.

Socioeconomic burden of influenza in the Republic of Korea, 2007-2010.

Background Although the socioeconomic burden of 2009 pandemic influenza A (H1N1) was considerable, no reliable estimates have been reported. Our aim was to compared medical costs and socioeconomic burden resulting from pandemic influenza A (H1N1) 2009 with that of previous seasonal influenza. Methods We estimated the medical costs and socioeconomic burden of influenza from May 2007 to April 2010. We used representative national data sources(data from the Health Insurance Review Agency, the National Health Insurance Corporation, the Korea Centers for Disease Control and Prevention, and the Korean National Statistics Office) including medical utilization, prescription of antivirals, and vaccination. Uncertainty of data was explored through sensitivity analysis using Monte Carlo simulation. Results Compared with the seasonal influenza, total medical costs (US

A review of the association between air pollutant exposure and allergic diseases in children

291.7 million) associated with pandemic (H1N1) 2009 increased more than 37-fold. Compared with the 2007–2008 season, outpatient diagnostic costs (US