Gyeongho Kang

Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells

We report a dopant-free polymeric hole transport material (HTM) that is based on benzo[1,2-b:4,5:b′]dithiophene and 2,1,3-benzothiadiazole, which results in highly efficient and stable perovskite solar cells (∼17.3% for over 1400 h at 75% humidity). The HTM comprises a random copolymer (RCP), which is characterized using UV-vis absorption spectroscopy, cyclic voltammetry, space-charge-limited current, and grazing-incidence wide-angle X-ray scattering. The RCP-based perovskite solar cell exhibits the highest efficiency (17.3%) in the absence of dopants [lithium bis(trifluoromethanesulfonyl)imide and tert-butylpyridine]. The observed efficiency is attributed to a deep HOMO energy level and high hole mobility. In addition, the long-term stability of the device is dramatically improved by avoiding deliquescent or hygroscopic dopants and by introducing a hydrophobic polymer layer. RCP devices maintain their initial efficiency for over 1400 h at 75% humidity, whereas devices made of HTMs with additives fail after 900 h.

Green-Solvent-Processable, Dopant-Free Hole-Transporting Materials for Robust and Efficient Perovskite Solar Cells

In addition to having proper energy levels and high hole mobility (μh) without the use of dopants, hole-transporting materials (HTMs) used in n-i-p-type perovskite solar cells (PSCs) should be processed using green solvents to enable environmentally friendly device fabrication. Although many HTMs have been assessed, due to the limited solubility of HTMs in green solvents, no green-solvent-processable HTM has been reported to date. Here, we report on a green-solvent-processable HTM, an asymmetric D-A polymer (asy-PBTBDT) that exhibits superior solubility even in the green solvent, 2-methylanisole, which is a known food additive. The new HTM is well matched with perovskites in terms of energy levels and attains a high μh (1.13 × 10-3 cm2/(V s)) even without the use of dopants. Using the HTM, we produced robust PSCs with 18.3% efficiency (91% retention after 30 days without encapsulation under 50%-75% relative humidity) without dopants; with dopants (bis(trifluoromethanesulfonyl) imide and tert-butylpyridine, a 20.0% efficiency was achieved. Therefore, it is a first report for a green-solvent-processable hole-transporting polymer, exhibiting the highest efficiencies reported so far for n-i-p devices with and without the dopants.

Pt-Free Counter Electrodes with Carbon Black and 3D Network Epoxy Polymer Composites

Carbon black (CB) and a 3D network epoxy polymer composite, representing dual functions for conductive corrosion protective layer (CCPL) and catalytic layer (CL) by the control of CB weight ratio against polymer is developed. Our strategy provides a proper approach which applies high catalytic ability and chemical stability of CB in corrosive triiodide/iodide (I3−/I−) redox electrolyte system. The CB and a 3D network epoxy polymer composite coated on the stainless steel (SS) electrode to alternate counter electrodes in dye sensitized solar cells (DSSCs). A two-step spray pyrolysis process is used to apply a solution containing epoxy monomers and a polyfunctional amine hardener with 6 wt% CB to a SS substrate, which forms a CCPL. Subsequently, an 86 wt% CB is applied to form a CL. The excellent catalytic properties and corrosion protective properties of the CB and 3D network epoxy polymer composites produce efficient counter electrodes that can replace fluorine-doped tin oxide (FTO) with CCPL/SS and Pt/FTO with CL/CCPL/SS in DSSCs. This approach provides a promising approach to the development of efficient, stable, and cheap solar cells, paving the way for large-scale commercialization.

Dye-Sensitized Solar Cells Employing Doubly or Singly Open-Ended TiO2 Nanotube Arrays: Structural Geometry and Charge Transport

We systematically investigated the charge transport properties of doubly or singly open-ended TiO2 nanotube arrays (DNT and SNT, respectively) for their utility as electrodes in dye-sensitized solar cells (DSCs). The SNT or DNT arrays were transferred in a bottom-up (B-up) or top-up (T-up) configuration onto a fluorine-doped tin oxide (FTO) substrate onto which had been deposited a 2 μm thick TiO2 nanoparticle (NP) interlayer. This process yielded four types of DSCs prepared with SNTs (B-up or T-up) or DNT (B-up or T-up). The photovoltaic performances of these DSCs were analyzed by measuring the dependence of the charge transport on the DSC geometry. High resolution scanning electron microscopy techniques were used to characterize the electrode cross sections, and electrochemical impedance spectroscopy was used to characterize the electrical connection at the interface between the NT array and the TiO2 NP interlayer. We examined the effects of decorating the DNT or SNT arrays with small NPs (sNP@DNT and sNP@SNT, respectively) in an effort to increase the extent of dye loading. The DNT arrays decorated with small NPs performed better than the decorated SNT arrays, most likely because the Ti(OH)4 precursor solution flowed freely into the array through the open ends of the NTs in the DNT case but not in the SNT case. The sNP@DNT-based DSC exhibited a better PCE (10%) compared to the sNP@SNT-based DSCs (6.8%) because the electrolyte solution flow was not restricted, direct electron transport though the NT arrays was possible, the electrical connection at the interface between the NT array and the TiO2 NP interlayer was good, and the array provided efficient light harvesting.

Highly Efficient and Uniform 1 cm2 Perovskite Solar Cells with an Electrochemically Deposited NiOx Hole-Extraction Layer

Given that the highest certified conversion efficiency of the organic-inorganic perovskite solar cell (PSC) already exceeds 22 %, which is even higher than that of the polycrystalline silicon solar cell, the significance of new scalable processes that can be utilized for preparing large-area devices and their commercialization is rapidly increasing. From this perspective, the electrodeposition method is one of the most suitable processes for preparing large-area devices because it is an already commercialized process with proven controllability and scalability. Here, a highly uniform NiOx layer prepared by electrochemical deposition is reported as an efficient hole-extraction layer of a p-i-n-type planar PSC with a large active area of >1 cm2 . It is demonstrated that the increased surface roughness of the NiOx layer, achieved by controlling the deposition current density, facilitates the hole extraction at the interface between perovskite and NiOx , and thus increases the fill factor and the conversion efficiency. The electrochemically deposited NiOx layer also exhibits extremely uniform thickness and morphology, leading to highly efficient and uniform large-area PSCs. As a result, the p-i-n-type planar PSC with an area of 1.084 cm2 exhibits a stable conversion efficiency of 17.0 % (19.2 % for 0.1 cm2 ) without showing hysteresis effects.

Role of Disorder in the Extent of Interchain Delocalization and Polaron Generation in Polythiophene Crystalline Domains

To understand how disorder within conjugated polymer aggregates influences the polaron generation process, we investigated poly(3-hexylthiophene) (P3HT) and a congeneric random copolymer incorporating 33 mol % substituent-free thiophene units (RP33). Steady-state absorption and fluorescence spectra showed that increasing the intrachain torsional disorder in aggregates increases the energy and breadth of the density of states (DOS). By extracting polaron dynamics in the transient absorption spectra, we found that an activation energy barrier of 0.05 eV is imposed on the charge separation process in P3HT, whereas that in RP33 is essentially barrierless. We also found that a significant amount of excitons in P3HT are deactivated by traps, while no trapped excitons are generated in RP33. This efficient polaron generation in RP33 was attributed to the excess energy and enhanced interchain delocalization of precursor states provided by the intrachain torsional disorder and the close-packing structure in the absence of hexyl substituents.