H.W. Lim

Eliminating artifacts in single-grid phase-contrast x-ray imaging for improving image quality.

In this study, we propose a modification to a single-grid phase-contrast x-ray imaging (PCXI) system using a Fourier domain analysis technique to extract absorption, scattering, and differential phase-contrast images. The proposed modification is to rotate the x-ray grid in the image plane to achieve spectral separation between the desired information and the moiré artifact, which is introduced by the superposition of the periodic image of the grid shadow and the periodic sampling by the detector. In addition, we performed some system optimization by adjusting distances between source, object, grid, and detector to further improve image quality. This optimization aimed to increase the spectral spacing between the primary spectrum (lower frequency) and the harmonics of the spectrum (higher frequency) used to extract the various image contrasts. The table-top setup used in the experiment consisted of a focused-linear grid with a 200-lines/inch strip density, a microfocus x-ray tube with a 55-μm focal spot size, and a CMOS flat-panel detector with a 49.5-μm pixel size. The x-ray grid was rotated at 27.8° with respect to the detector and the sample was placed as close as possible to the x-ray tube. Our results indicated that the proposed method effectively eliminated the PCXI artifacts, thus improving image quality.

3D reconstruction based on compressed-sensing (CS)-based framework by using a dental panoramic detector

In this work, we propose a practical method that can combine the two functionalities of dental panoramic and cone-beam CT (CBCT) features in one by using a single panoramic detector. We implemented a CS-based reconstruction algorithm for the proposed method and performed a systematic simulation to demonstrate its viability for 3D dental X-ray imaging. We successfully reconstructed volumetric images of considerably high accuracy by using a panoramic detector having an active area of 198.4 mm × 6.4 mm and evaluated the reconstruction quality as a function of the pitch (p) and the angle step (Δθ). Our simulation results indicate that the CS-based reconstruction almost completely recovered the phantom structures, as in CBCT, for p≤2.0 and θ≤6°, indicating that it seems very promising for accurate image reconstruction even for large-pitch and few-view data. We expect the proposed method to be applicable to developing a cost-effective, volumetric dental X-ray imaging system.