Haeng-Deog Koh

Effect of solvent composition on transformation of micelles to vesicles of rod-coil poly(n-hexyl isocyanate-block-2-vinylpyridine) diblock copolymers.

The self-aggregation behavior of an amphiphilic rod-coil block copolymer of poly(n-hexyl isocyanate-block-2-vinylpyridine) (PHIC(189)-b-P2VP(228)) (f(P2VP) = 0.78, M(n) = 24.5K) in a tetrahydrofuran (THF)/water system was examined using dynamic light scattering (DLS), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE-SEM). The presence of a certain amount of water in the THF-based polymer solution induced a morphological transition from spherical solid micelles to open mouth platelike vesicles. The size of the aggregates increased with an increase in water content in the mixed solvent of THF/water. In the range of 30-40% water, the polymer formed vesicles with an interdigitated architecture of poly(n-hexyl isocyanate) (PHIC) at the center of the membrane and with the poly(2-vinylpyridine) (P2VP) block forming the outer layers and pointing toward the solvent. However, at higher water contents, the thickness of the bilayer increased due to the rearrangement of the vesicle membrane from a flip-flop to a lamellar architecture. After the degradation of the PHIC from the vesicles at basic pH, hollow spherical aggregates remained stable. After removing the THF from the mixed solvent using dialysis, large-sized compound vesicles were formed.

Preparation of Ag-Embedded Polystyrene Nanospheres and Nanocapsules by Miniemulsion Polymerization

An isopropyl myristate (IPM) biocompatible oil and an IPM solution of dodecanethiol-capped Ag nanoparticles (NPs, 4.5 nm) were used as hydrophobes to suppress the Ostwald ripening of monomer/hydrophobe miniemulsified droplets in a surfactant-stabilized water phase. The formation of non-IPM-encapsulated nanospheres (48 nm) and IPM-encapsulated nanocapsules (90 nm) were precisely controlled by using a water-soluble and an oil-soluble initiator, respectively, in the presence of a pure IPM as a hydrophobe in miniemulsion polymerization. Well-defined PS nanospheres, on which surfaces were coated with Ag NPs (Ag/PS nanospheres, 65 nm), and nanocapsules encapsulating both NPs and IPM liquid phase (Ag-IPM/PS nanocapsules, 115 nm) were made by replacing the hydrophobe from pure IPM with Ag/IPM solution. These nanostructures were characterized by transmission and scanning electron microscopes.

Well-Organized CdS/C60 in Block Copolymer Micellar Cores

CdS nanoparticles of 4.5 nm diameter were synthesized in poly(2-vinylpyridine) micellar cores which were obtained by solvating a polystyrene-block-poly(2-vinylpyridine) block copolymer in polystyrene-selective toluene. Then, a C(60) -toluene solution was dispersed into the CdS micelle solution with stirring. This led to the well-defined organization of two different nanoparticles; specifically: a CdS NP decorated by several/dozens of C(60) molecules, because C(60) molecules were strongly coordinated with pyridine molecules in the micellar cores by charge-transfer complexation C 60δ--P2VP(δ+) . A harmoniously organized CdS/C(60) micellar structure was clearly verified by transmission electron microscopy. Fluorescent quenching of CdS nanoparticles, which was strongly affected by neighboring C(60) molecules, was observed.

Formation of Intermicellar-Chained and Cylindrical Micellar Networks From an Amphiphilic Rod—Coil Block Copolymer: Poly(n-hexyl isocyanate)-block-poly(2-vinylpyridine)

Morphologies of the poly(n-hexyl isocyanate)-block-poly(2-vinylpyridine) (PHIC-b-P2VP, fP2VP=0.3) amphiphilic rod-coil block copolymer were studied in rod-selective chloroform (CHCl3), both-block-soluble tetrahydrofuran (THF), and CHCl3/THF mixed solvent systems. Spherical, solid micelles with a P2VP core and PHIC shell were formed in CHCl3, whereas a microphase-separated liquid crystalline morphology was prominent in the presence of THF. In the CHCl3/THF mixed solvent system, a unique long-range intermicellar-chained network (v/v=7/3) and a more evolved cylindrical micellar network (v/v=3/7) were remarkably formed, respectively. PHIC-b-P2VP network nanostructures were used as a template for the in situ synthesis of Au nanoparticles (8 nm) selectively within the functional P2VP core domains.

Molecular Level Ordering in Poly(2-vinylpyridine)

The reaction between atactic poly(2-vinylpyridine) and 1,4-dibromobutane leads to formation of long-range 3D molecular ordering in polymer chains mainly because the side group (pyridine) of the polymer chain changes to a syndotactic configuration. This may enable the production of functional molecular devices that operate on a 3D atomic scale.

Au/CdS Hybrid Nanoparticles in Block Copolymer Micellar Shells

A polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) micellar structure with a P2VP core containing 5 nm CdS nanoparticles (NPs) and a PS shell formed in toluene that is a good solvent for PS block undergoes the core-shell inversion by excess addition of methanol that is a good solvent for P2VP block. It leads to the formation of micellar shell-embedded CdS NPs in the methanol major phase. The spontaneous crystalline growth of Au NPs on the CdS surfaces positioned at micellar shells without a further reduction process is newly demonstrated. The nanostructure of Au/CdS/PS-b-P2VP hybrid NPs is confirmed by transmission electron microscopy, energy-dispersive X-ray, and UV-Vis absorption.

Location-controlled parallel and vertical orientation by dewetting-induced block copolymer directed self-assembly

We demonstrate a method for controlling whether the block copolymer (BCP) cylinders comprising a thin film self-assembled on a Si substrate are oriented parallel or vertical to the substrate. This was accomplished by fabricating topographic patterns having different trench/mesa ratios on the Si substrate and resulting in the dewetting behavior of the BCP film on the mesa regions of the substrate, which led to the migration of the BCP mass from the mesas to the trenches owing to capillary forces during thermal annealing. By increasing the width of the mesas, the thickness of the BCP films formed in the trenches could be increased. Thus, by increasing the trench/mesa ratio from 1 : 1 to 1 : 3, the thickness of the BCP film in the trenches could be increased with precision from 18 to 26 nm. Films comprising arrays of parallelly oriented cylinders were preferentially formed with thicknesses of less than 21.5 nm. For films greater than 22.5 nm in thickness, the orientation of the cylinders switched and the cylinders became vertically oriented in the absence of interfacial sublayers between the BCP film and the topographic guide patterns on the Si substrate.

The fabrication of nanopatterns with Au nanoparticles-embedded micelles via nanoimprint lithography

We fabricated nanopatterns with Au nanoparticles-embedded micelles (Au-micelles) by self-assembly of block copolymers via nanoimprint lithography. The micelle structure prepared by self-assembled block copolymers was used as a template for the synthesis of Au nanoparticles (Au NPs). Au NPs were synthesized in situ inside the micelles of polystyrene-block-poly(2-vinylpyridine) (PS- b-P2VP). Au-micelles were arranged on the trenches of the polymer template, which was imprinted by nanoimprint lithography. The fabrication of line-type and dot-type nanopatterns was carried out by the combined method. In addition, multilayer nanopatterns of the Au-micelles were also proposed.

CdS/C60 binary nanocomposite films prepared via phase transition of PS-b-P2VP block copolymer.

We demonstrate the well-defined control of phase transition of a polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer from spherical micelles to lamellar structures, in which CdS and C60 nanoparticles (NPs) are selectively positioned at the P2VP domains. The CdS NPs are in situ synthesized using PS-b-P2VP block copolymer templates that are self-assembled in PS-selective solvents. The CdS-PS-b-P2VP micellar structures are transformed to lamellar phase by adjusting a solvent selectivity for both blocks. In addition, a binary system of CdS/C60 embedded in PS-b-P2VP lamellar structures (CdS/C60-PS-b-P2VP) is fabricated by embedding C60 molecules into P2VP domain though charge-transfer complexation between pyridine units of PS-b-P2VP and C60 molecules. The CdS/C60-PS-b-P2VP nanostructured films are characterized by transmission electron microscopy (TEM) and UV-Vis spectrometer.