Hakan Eroglu

Squalenoyl adenosine nanoparticles provide neuroprotection after stroke and spinal cord injury.

There is an urgent need to develop new therapeutic approaches for the treatment of severe neurological trauma, such as stroke and spinal cord injuries. However, many drugs with potential neuropharmacological activity, like adenosine, are inefficient upon systemic administration because of their fast metabolisation and rapid clearance from the bloodstream. Here, we show that the conjugation of adenosine to the lipid squalene and the subsequent formation of nanoassemblies allow a prolonged circulation of this nucleoside, to provide neuroprotection in mouse stroke and rat spinal cord injury models. The animals receiving systemic administration of squalenoyl adenosine nanoassemblies showed a significant improvement of their neurologic deficit score in the case of cerebral ischaemia, and an early motor recovery of the hindlimbs in the case of spinal cord injury. Moreover, in vitro and in vivo studies demonstrated that the nanoassemblies were able to extend adenosine circulation and its interaction with the neurovascular unit. This paper shows, for the first time, that a hydrophilic and rapidly metabolised molecule like adenosine may become pharmacologically efficient owing to a single conjugation with the lipid squalene.

The in-vitro and in-vivo characterization of PLGA:L-PLA microspheres containing dexamethasone sodium phosphate.

Dexamethasone sodium phosphate (DSP) is a widely used corticosteroid in the treatment of brain oedema associated with brain tumours. DSP has many side effects that limit its usage at an effective concentration. The objective of this study was to minimize these side effects by encapsulating DSP using biodegradable synthetic polymers, to extend the release time from microspheres and to evaluate the effectiveness in the treatment of brain oedema. Microspheres containing 5% DSP were formulated by the solvent evaporation method by using a 1:1 mixture of two synthetic polymers, poly(lactic-co-glycolic acid) and L-polylactic acid (PLGA and L-PLA). The surface morphologies and particle size distribution of the microspheres were investigated. The in-vitro release studies were performed in pH 7.4 phosphate buffer solution. For determining the effectiveness of microspheres in the treatment of brain oedema, Sprague-Dawley rats weighing 200-250g were used as an animal model. Brain oedema was generated by the cold lesion method, and the effectiveness of the microspheres in treatment of oedema was investigated by the wet-dry weight method, lipid peroxidation ratios and histological evaluations. The average particle size of the microspheres was 13.04 +/- 2.05 microm, and the in-vitro release time of the microspheres was 8 h for 100/release. The degree of oedema was significantly different from the control group for the wet-dry weight method and lipid peroxidation ratio (p < 0.05). Similarly, histological evaluation of the tissues shoved that degree of oedema was significantly decreased with respect to the control group. All these results showed that implantation of microspheres was significantly more effective with respect to the systemic administration of DSP.Dexamethasone sodium phosphate (DSP) is a widely used corticosteroid in the treatment of brain oedema associated with brain tumours. DSP has many side effects that limit its usage at an effective concentration. The objective of this study was to minimize these side effects by encapsulating DSP using biodegradable synthetic polymers, to extend the release time from microspheres and to evaluate the effectiveness in the treatment of brain oedema. Microspheres containing 5% DSP were formulated by the solvent evaporation method by using a 1:1 mixture of two synthetic polymers, poly(lactic-co-glycolic acid) and L-polylactic acid (PLGA and L-PLA). The surface morphologies and particle size distribution of the microspheres were investigated. The in-vitro

Brain targeting of Atorvastatin loaded amphiphilic PLGA-b-PEG nanoparticles.

The objective of this study was to develop polysorbate 80 coated and Atorvastatin loaded poly(lactic-co-glycolic acid)-block-poly(ethylene glycol) (PLGA-b-PEG) nanoparticles and to investigate advantages of coating on nanoparticles for brain delivery of Atorvastatin. The nanoparticles were prepared by nanoprecipitation method. The effects of polymer concentration, PEG content and polysorbate 80 coating on the particle size, drug loading efficiency and release behaviour of nanoparticles were investigated. Additionally, cellular uptake and brain targeting of formulated nanoparticles were studied. Particle sizes were in the range of 30–172 nm depending on formulation parameters. Increasing the polymer concentration significantly increased the nanoparticle size. Decreasing the PEG content from 15% to 5% (w/w) in polymer composition increased the nanoparticle size from 69 to 172 nm. Both coated and uncoated polysorbate 80 nanoparticles were effectively internalised within the endothelial cells. Moreover, both types of nanoparticles were able to penetrate the blood brain barrier and reach the maximum in brain 1 h post injection. It was concluded that these nanoparticles are promising nanosystems for treatment of neurological disorders.

A comparative study of treatment for brain edema: Magnesium sulphate versus dexamethasone sodium phosphate

Treatments for brain edema are important and one of the major options is corticosteroids. Cell membrane stabilization and prevention of formation of free radicals are the main mechanisms of action of steroids in edema treatment. As an alternative therapeutic agent, magnesium sulphate has been used for its neuroprotective effect in various injury models. In our animal model of brain injury, cold has been used in Sprague-Dawley rats. After brain injury, magnesium sulphate (600 mg/kg) or dexamethasone sodium phosphate (0.2 mg/kg) were administered to experimental groups. The degree of brain edema and lipid peroxidation was evaluated using the wet-dry weight method, the determination of malondialdehyde (MDA) levels and an ultrastructural grading system. Magnesium sulphate treatment was found to be the most effective choice due to the absence of side effects and comparable efficacy to corticosteroids.

Atorvastatin efficiency after traumatic brain injury in rats

BACKGROUND The neuroprotective effects of statins possibly depend on their pleiotropic effect such as antioxidative and anti-inflammatory properties. In this study, we have evaluated the efficiency of atorvastatin on brain edema, lipid peroxidation, and ultrastructural changes in TBI animal model. METHODS Modified Feeney method has been used for the trauma model in rats. Only craniectomy for group A and trauma after craniectomy for group B was the procedure for animals. For the trauma, rods weighing 24 g were dropped on a foot plate just over the dura. Atorvastatin (1 mg/kg, IP) was administered to the animals in group C after craniectomy and trauma; but on the other hand, animals in group D received only 0.5 mL PEG as the vehicle. Brains were harvested 24 hours after the trauma for the assays of wet-dry weight, lipid peroxidation level, and ultrastructural investigations. Lipid peroxidation levels, TEM, and UNGS were the investigated parameters. The statistical comparisons between the groups were investigated by 1-way ANOVA and post hoc analysis by Duncan and Dunnett T3 test within the groups at the significance level P = .05. RESULTS Trauma increased water contents of the brain tissues and lipid peroxidation levels in groups B and D. When compared with the results of group B (brain edema, 84.694% +/- 1.510%; lipid peroxidation, 74.932 +/- 2.491 nmol/g tissue), atorvastatin (1 mg/kg) significantly decreased brain edema (77.362% +/- 1.448%), lipid peroxidation level (58.335 +/- 3.980 nmol/g tissue), and UNGS scores in group C (P < 0.05). CONCLUSION In this descriptive study, the remarkable improvements of atorvastatin on brain edema, lipid peroxidation, and ultrastructural investigations encouraged us for a further dose optimization study.

Cationic core-shell nanoparticles for intravesical chemotherapy in tumor-induced rat model: Safety and efficacy

Mitomycin C (MMC) has shown potent efficacy against a wide spectrum of cancers and is clinical first choice in superficial bladder tumors. However, intravesical chemotherapy with MMC has been ineffective due to periodical discharge of the bladder and instability of this drug in acidic pH, both resulting in high rate of tumor recurrence and insufficiency to prevent progression. Nanocarriers may be a promising alternative for prolonged, effective and safe intravesical drug delivery due to their favorable size, surface properties and optimum interaction with mucosal layer of the bladder wall. Hence, the aim of this study was to evaluate and optimize cationic core-shell nanoparticles formulations (based on chitosan (CS) and poly-ϵ-caprolactone (PCL)) in terms of antitumor efficacy after intravesical administration in bladder tumor induced rat model. Antitumor efficacy was determined through the parameters of survival rate and nanoparticle penetration into the bladder tissue. Safety of the formulations were evaluated by histopathological evaluation of bladder tissue as well as observation of animals treated with MMC bound to nanoparticles. Results indicated that chitosan coated poly-ϵ-caprolactone (CS-PCL) nanoparticles presented the longest survival rate among all treatment groups as evaluated by Kaplan-Meier plotting. Histopathological evaluation revealed that cationic nanoparticles were localized and accumulated in the bladder tissue. As intravesical chemotherapy is a local therapy, no MMC was quantified in blood after intravesical instillation indicating no systemic uptake for the drug which could have subsequently led to side effects. In conclusion, core-shell type cationic nanoparticles may be effective tools for the intravesical chemotherapy of recurrent bladder tumors.

Chitosan Formulations for Steroid Delivery: Effect of Formulation Variables on In Vitro Characteristics

ABSTRACT Chitosan film formulations for steroid delivery after craniomaxillofacial surgery were formulated by using three different types of chitosan with respect to their molecular weight as low, medium and high. Film formulations were prepared by casting/solvent evaporation technique. In vitro characterization, film thickness, equilibrium swelling degree, in vitro release profiles and surface morphologies were investigated. For two different types of crosslinkings, the release of dexamethasone sodium phosphate (DSP) can be extended as the molecular weight increases. As a result, chitosan film formulations should be beneficial for steroid delivery for a certain time after craniomaxillofacial surgery.

Systematic development of pH-independent controlled release tablets of carvedilol using central composite design and artificial neural networks

The purpose of this study was to apply the optimization method incorporating artificial neural network (ANN) using pH-independent release of weakly basic drug, carvedilol from HPMC-based matrix formulation. Because of weakly basic nature of carvedilol, drug shows pH-dependent solubility. The enteric polymer EUDRAGIT L100 was added formulations to overcome pH-dependent solubility of carvedilol. Effects of the Hydroxypropylmethyl cellulose (HPMC) K4M and EUDRAGIT L100 amount on drug release were investigated. For this purpose 13 kinds of formulations were prepared at three different levels of each variables. The optimization of the formulation was evaluated by using ANN method. Two formulation parameters, the amounts of HPMC K4M and Eudragit L100 at three levels (−1, 0, 1) were selected as independent/input variables. In-vitro dissolution sampling times at twelve different time points were selected as dependent/output variables. By using experimental dissolution results and amount of HPMC K4M and EUDRAGIT L100, percentage of dissolved carvedilol was predicted by ANN. Similarity factor (f2) between predicted and experimentally observed profile was calculated and f2 value was found 76.33. This value showed that there was no difference between predicted and experimentally observed drug release profile. As a result of these experiments, it was found that ANNs can be successfully used to optimize controlled release drug delivery systems.

Comparison of pharmacokinetic profiles of moxifloxacin in Caesarean versus non-pregnant sectioned women by fully validated HPLC with fluorescence detection.

In this study, a simple, rapid, cost-effective, and sensitive reversed-phase high-performance liquid chromatographic method has been developed and validated for the analysis of moxifloxacin in plasma. The chromatographic separation was achieved on a Zorbax Eclipse XDB-C18 column (150 mm x 4.6 mm i.d.) connected to a Phenomenex C(18) column (4 mm x 3.0 mm i.d.) using a mixture of acetonitrile: 15 mM citrate buffer (pH 3) (23:77, v/v) as the mobile phase with isocratic system at a flow rate of 1 mL/min. Fluorescence detection was employed with excitation at 290 nm and emission at 500 nm. Lomefloxacin was used as internal standard. Plasma samples were prepared with addition of acetonitrile only. The method was fully validated according to the International Conference on Harmonization (ICH) guidelines. The results of the validation parameters were: linearity range, 3-6000 ng/mL (R(2) = 0.9994); mean recovery, 100.48 %; limit of quantification, 5 ng/mL; limit of detection, 1 ng/mL; and intra- and inter-day precision less than 3.2% and 5.1%, respectively. The robustness of the method was evaluated and confirmed with fractional factorial design. After validation studies, the method was applied in order to conclude the effects of pregnancy on postoperative pharmacokinetic profiles of moxifloxacin. For this aim, moxifloxacin was given to non-pregnant women (n=9) and caesarean-sectioned women (n=6) as a single intravenous dose (400 mg Avelox(R) infusion). Plasma samples were analyzed in order to compare pharmacokinetic profiles of pregnants and non-pregnants. Peak serum concentrations of non-pregnant and caesarean-sectioned women at the arterial port after the infusion were 4.95 +/- 1.50 and 1.56 +/- 0.16 microg/mL, respectively. The mean elimination half-life, volume of distribution and calculated area under the concentration-time curve (AUC)(0-infinity) were 5.54 +/- 0.73 h, 65.58 +/- 6.30 L and 49.95 +/- 6.30 microg.h/mL for non-pregnant women and 3.50 +/- 0.37 h, 215.85 +/- 24.87 L and 10.53 +/- 0.66 microg.h/mL for caesarean-sectioned women, respectively. These results indicated that pregnancy has a significant effect on the pharmacokinetics of moxifloxacin.

Therapeutic efficacy of folate receptor-targeted amphiphilic cyclodextrin nanoparticles as a novel vehicle for paclitaxel delivery in breast cancer

Abstract Purpose: The aim of this study is to test folate-conjugated cyclodextrin nanoparticles (FCD-1 and FCD-2) as a vehicle for reducing toxicity and increasing the antitumor efficacy of paclitaxel especially for metastatic breast cancer. Methods: For the evaluation of PCX-loaded FCD nanoparticles, animal studies were realised in terms of survival rate, tumour size, weight change, metastazis and histopathological examination. Results: FCD-1 displayed significant advantages such as efficient targeting of folate receptor positive breast cancer cells and having considerably lower toxicity compared to that of Cremophor®. When loaded with paclitaxel, FCD-1 nanoparticles, which have smaller particle size, neutral zeta potential, high encapsulation efficiency and better loading capacity for controlled release, emerged as an effective formulation in terms of cytotoxicity and high cellular uptake. In an experimental breast cancer model, anticancer activity of these nanoparticles were compatible with that of paclitaxel in Cremophor® however repeated administrations of FCD-1 nanoparticles were better tolerated by the animals. These nanoparticles were able to localise in tumour site. Both paclitaxel-loaded FCD-1 and FCD-2 significantly reduced tumour burden while FCD-1 significantly improved the survival. Conclusions: Folate-conjugated amphiphilic cyclodextrin nanoparticles can be considered as promising Cremophor®-free, low-toxicity and efficient active drug delivery systems for paclitaxel.