Halina Rubinsztein-Dunlop

Optical alignment and spinning of laser-trapped microscopic particles

Light-induced rotation of absorbing microscopic particles by transfer of angular momentum from light to the material raises the possibility of optically driven micromachines. The phenomenon has been observed using elliptically polarized laser beams or beams with helical phase structure,. But it is difficult to develop high power in such experiments because of overheating and unwanted axial forces, limiting the achievable rotation rates to a few hertz. This problem can in principle be overcome by using transparent particles, transferring angular momentum by a mechanism first observed by Beth in 1936, when he reported a tiny torque developed in a quartz ‘wave-plate’ owing to the change in polarization of transmitted light. Here we show that an optical torque can be induced on microscopic birefringent particles of calcite held by optical tweezers. Depending on the polarization of the incident beam, the particles either become aligned with the plane of polarization (and thus can be rotated through specified angles) or spin with constant rotation frequency. Because these microscopic particles are transparent, they can be held in three-dimensional optical traps at very high power without heating, leading to rotation rates of over 350 Hz.

Optical-Particle Trapping with Higher-Order Doughnut Beams Produced Using High-Efficiency Computer-Generated Holograms

Laser beams containing higher-order phase singularities can be produced with high efficiency computer generated holograms made with very simple equipment. Using such holograms in an optical tweezers experiment we have successfully trapped reflective and absorptive particles in the dark central spot of a focused charge 3 singularity beam. Angular momentum absorbed from the beam can set particles into rotation.

Laser-Beams with Phase Singularities

Phase singularities in an optical field appear as isolated dark spots and can be generated in active laser cavities or by computer generated holograms. Detection and categorization of these singularities can easily be achieved either by interferometry or Fourier transform pattern recognition using a computer generated hologram.

Optical tweezers computational toolbox

We describe a toolbox, implemented in Matlab, for the computational modelling of optical tweezers. The toolbox is designed for the calculation of optical forces and torques, and can be used for both spherical and nonspherical particles, in both Gaussian and other beams. The toolbox might also be useful for light scattering using either Lorenz–Mie theory or the T-matrix method.

Optical microrheology using rotating laser-trapped particles

We demonstrate an optical system that can apply and accurately measure the torque exerted by the trapping beam on a rotating birefringent probe particle. This allows the viscosity and surface effects within liquid media to be measured quantitatively on a micron-size scale using a trapped rotating spherical probe particle. We use the system to measure the viscosity inside a prototype cellular structure.

Optically driven micromachine elements

We report on a proof of principle demonstration of an optically driven micromachine element. Optical angular momentum is transferred from a circularly polarized laser beam to a birefringent particle confined in an optical tweezers trap. The optical torque causes the particle to spin at up to 350 Hz, and this torque is harnessed to drive an optically trapped microfabricated structure. We describe a photolithographic method for producing the microstructures and show how a light driven motor could be used in a micromachine system.

Optical application and measurement of torque on microparticles of isotropic nonabsorbing material

We show how it is possible to controllably rotate or align microscopic particles of isotropic nonabsorbing material in a TEM00 Gaussian beam trap, with simultaneous measurement of the applied torque using purely optical means. This is a simple and general method of rotation, requiring only that the particle is elongated along one direction. Thus, this method can be used to rotate or align a wide range of naturally occurring particles. The ability to measure the applied torque enables the use of this method as a quantitative tool - the rotational equivalent of optical tweezers based force measurement. As well as being of particular value for the rotation of biological specimens, this method is also suitable for the development of optically-driven micromachines.

Dynamical tunnelling of ultracold atoms

The divergence of quantum and classical descriptions of particle motion is clearly apparent in quantum tunnelling between two regions of classically stable motion. An archetype of such non-classical motion is tunnelling through an energy barrier. In the 1980s, a new process, ‘dynamical’ tunnelling, was predicted, involving no potential energy barrier; however, a constant of the motion (other than energy) still forbids classically the quantum-allowed motion. This process should occur, for example, in periodically driven, nonlinear hamiltonian systems with one degree of freedom. Such systems may be chaotic, consisting of regions in phase space of stable, regular motion embedded in a sea of chaos. Previous studies predicted dynamical tunnelling between these stable regions. Here we observe dynamical tunnelling of ultracold atoms from a Bose–Einstein condensate in an amplitude-modulated optical standing wave. Atoms coherently tunnel back and forth between their initial state of oscillatory motion (corresponding to an island of regular motion) and the state oscillating 180° out of phase with the initial state.

Forces in optical tweezers with radially and azimuthally polarized trapping beams.

It has been suggested that radially polarized beams can be used to improve the performance of optical tweezers, with reduced scattering force resulting from both the polarization and the dark center of the beam [Opt. Lett. 32, 1839 (2007)]. We calculate the forces on particles in such traps, using rigorous electromagnetic theory, comparing the results with azimuthally polarized beam, circularly polarized LG 01 beams, and Gaussian beams. Our results agree qualitatively with Opt. Lett. 32, 1839 (2007), but differ quantitatively.

Optical torque controlled by elliptical polarization.

We show theoretically and demonstrate experimentally that highly absorbing particles can be trapped and manipulated in a single highly focused Gaussian beam. Our studies of the effects of polarized light on such particles show that they can be set into rotation by elliptically polarized light and that both the sense and the speed of their rotation can be smoothly controlled.