Han S. Kim

Enhanced current production by Desulfovibrio desulfuricans biofilm in a mediator-less microbial fuel cell.

In this study, a mediator-less microbial fuel cell (MFC) inoculated with a sulfate-reducing bacterium (SBR), Desulfovibrio desulfuricans, was equipped with bare and surface-treated graphite felt electrodes. Electrochemical treatment of the anode surface facilitated biofilm formation on the electrode, resulting in rapid and enhanced current production. The maximum current density of the treated anode was 233±24.2mA/m(2), which was 41% higher than that of the untreated anode. The electron transfer rate also increased from 2.45±0.04 to 3.0±0.02μmol of electrons/mg of protein·min. Biofilm formation on the treated anode was mainly due to the strong hydrogen or peptide bonds between the amide groups of bacterial materials (including cytochrome c) and carboxyl groups formed on the electrodes. These results provide useful information on direct electron transfer by SRB in a mediator-less MFC through cytochrome c and the effects of the electrochemical treatment of electrodes on MFC performance.

Production of electrically-conductive nanoscale filaments by sulfate-reducing bacteria in the microbial fuel cell.

This study reports that the obligate anaerobic microorganism, Desulfovibrio desulfuricans, a predominant sulfate-reducing bacterium (SRB) in soils and sediments, can produce nanoscale bacterial appendages for extracellular electron transfer. These nanofilaments were electrically-conductive (5.81S·m(-1)) and allowed SRBs to directly colonize the surface of insoluble or solid electron acceptors. Thus, the direct extracellular electron transfer to the insoluble electrode in the microbial fuel cell (MFC) was possible without inorganic electron-shuttling mediators. The production of nanofilaments was stimulated when only insoluble electron acceptors were available for cellular respiration. These results suggest that when availability of a soluble electron acceptor for SRBs (SO4(2-)) is limited, D. desulfuricans initiates the production of conductive nanofilaments as an alternative strategy to transfer electrons to insoluble electron acceptors. The findings of this study contribute to understanding of the role of SRBs in the biotransformation of various substances in soils and sediments and in the MFC.

Effective biochemical decomposition of chlorinated aromatic hydrocarbons with a biocatalyst immobilized on a natural enzyme support

The enzymatic decomposition of 4-chlorophenol metabolites using an immobilized biocatalyst was investigated in this study. Catechol 1,2-dioxygenase for ortho ring cleavage obtained via cloning of the corresponding gene cphA-I from Arthrobacter chlorophenolicus A6 was overexpressed and purified. It was found that the cphA-I enzyme could catalyze the degradation of catechol, 4-chlorocatechol, and 3-methylcatechol. The expressed enzyme was immobilized onto a natural enzyme support, fulvic acid-activated montmorillonite. The immobilization yield was as high as 63%, and the immobilized enzyme maintained high substrate utilization activity, with only a 15-24% reduction in the specific activity. Kinetic analysis demonstrated marginal differences in νmax and KM values for the free and immobilized enzymes, indicating that inactivation of the immobilized enzyme was minimal. The immobilized enzyme exhibited notably increased stability against changes in the surrounding environment (temperature, pH, and ionic strength). Our results provide useful information for the effective enzymatic biochemical treatment of hazardous organic compounds.

Evaluation of soil flushing of complex contaminated soil: an experimental and modeling simulation study.

The removal of heavy metals (Zn and Pb) and heavy petroleum oils (HPOs) from a soil with complex contamination was examined by soil flushing. Desorption and transport behaviors of the complex contaminants were assessed by batch and continuous flow reactor experiments and through modeling simulations. Flushing a one-dimensional flow column packed with complex contaminated soil sequentially with citric acid then a surfactant resulted in the removal of 85.6% of Zn, 62% of Pb, and 31.6% of HPO. The desorption distribution coefficients, KUbatch and KLbatch, converged to constant values as Ce increased. An equilibrium model (ADR) and nonequilibrium models (TSNE and TRNE) were used to predict the desorption and transport of complex contaminants. The nonequilibrium models demonstrated better fits with the experimental values obtained from the column test than the equilibrium model. The ranges of KUbatch and KLbatch were very close to those of KUfit and KLfit determined from model simulations. The parameters (R, β, ω, α, and f) determined from model simulations were useful for characterizing the transport of contaminants within the soil matrix. The results of this study provide useful information for the operational parameters of the flushing process for soils with complex contamination.

pH-rate profiles of L-arabinitol 4-dehydrogenase from Hypocrea jecorina and its application in L-xylulose production.

l-Arabinitol 4-dehydrogenase (LAD) from Hypocrea jecorina (HjLAD) was cloned and overexpressed in Escherichia coli BL21 (DE3). The kinetics of l-arabinitol oxidation by NAD(+), catalyzed by HjLAD, was studied within the pH range of 7.0-9.5 at 25°C. The turnover number (kcat) and the catalytic efficiency (kcat/Km) were 4200min(-1) and 290mM(-1)min(-1), respectively. HjLAD showed the highest turnover number and catalytic efficiency among all previously characterized LADs. In further application of HjLAD, rare l-sugar l-xylulose was produced by the enzymatic oxidation of arabinitol to give a yield of approximately 86%.

Control of malodorous hydrogen sulfide compounds using microbial fuel cell.

In this study, a microbial fuel cell (MFC) was used to control malodorous hydrogen sulfide compounds generated from domestic wastewaters. The electricity production demonstrated a distinct pattern of a two-step increase during 170xa0h of system run: the first maximum current density was 118.6xa0±xa07.2xa0mAxa0m−2 followed by a rebound of current density increase, reaching the second maximum of 176.8xa0±xa09.4xa0mAxa0m−2. The behaviors of the redox potential and the sulfate level in the anode compartment indicated that the microbial production of hydrogen sulfide compounds was suppressed in the first stage, and the hydrogen sulfide compounds generated from the system were removed effectively as a result of their electrochemical oxidation, which contributed to the additional electricity production in the second stage. This was also directly supported by sulfur deposits formed on the anode surface, which was confirmed by analyses on those solids using a scanning electron microscope equipped with energy dispersive X-ray spectroscopy as well as an elemental analyzer. To this end, the overall reduction efficiencies for HS− and H2S(g) were as high as 67.5 and 96.4xa0%, respectively. The correlations among current density, redox potential, and sulfate level supported the idea that the electricity signal generated in the MFC can be utilized as a potential indicator of malodor control for the domestic wastewater system.

Oxidative biodegradation of 4-chlorophenol by using recombinant monooxygenase cloned and overexpressed from Arthrobacter chlorophenolicus A6

In this study, cphC-I and cphB, encoding a putative two-component flavin-diffusible monooxygenase (TC-FDM) complex, were cloned from Arthrobacter chlorophenolicus A6. The corresponding enzymes were overexpressed to assess the feasibility of their utilization for the oxidative decomposition of 4-chlorophenol (4-CP). Soluble CphC-I was produced at a high level (∼50%), and subsequently purified. Since CphB was expressed in an insoluble form, a flavin reductase, Fre, cloned from Escherichia coli was used as an alternative reductase. CphC-I utilized cofactor FADH2, which was reduced by Fre for the hydroxylation of 4-CP. This recombinant enzyme complex exhibited a higher specific activity for the oxidation of 4-CP (45.34U/mg-protein) than that exhibited by CphC-I contained in cells (0.18U/mg-protein). The Michaelis-Menten kinetic parameters were determined as: vmax=223.3μM·min-1, KM=249.4μM, and kcat/KM=0.052min-1·μM-1. These results could be useful for the development of a new biochemical remediation technique based on enzymatic agents catalyzing the degradation of phenolic contaminants.

Enzymatic degradation of aromatic hydrocarbon intermediates using a recombinant dioxygenase immobilized onto surfactant-activated carbon nanotube

This study examined the enzymatic decomposition of aromatic hydrocarbon intermediates (catechol, 4-chlorocatechol, and 3-methylcatechol) using a dioxygenase immobilized onto single-walled carbon nanotube (SWCNT). The surfaces of SWCNTs were activated with surfactants. The dioxygenase was obtained by recombinant technique: the corresponding gene was cloned from Arthrobacter chlorophenolicus A6, and the enzyme was overexpressed and purified subsequently. The enzyme immobilization yield was 62%, and the high level of enzyme activity was preserved (60-79%) after enzyme immobilization. Kinetic analyses showed that the substrate utilization rates and the catalytic efficiencies of the immobilized enzyme for all substrates (target aromatic hydrocarbon intermediates) tested were similar to those of the free enzyme, indicating that the loss of enzyme activity was minimal during enzyme immobilization. The immobilized enzyme was more stable than the free enzyme against abrupt changes in pH, temperature, and ionic strength. Moreover, it retained high enzyme activity even after repetitive use.

Noncovalent and covalent immobilization of oxygenase on single-walled carbon nanotube for enzymatic decomposition of aromatic hydrocarbon intermediates

The decomposition of various aromatic hydrocarbon intermediates was examined using a recombinant oxidative enzyme immobilized on single-walled carbon nanotubes (SWCNTs). Hydroxyquinol 1,2-dioxygenase (CphA-I), which catalyzes ring cleavage of catechol and its analogues, was obtained from Arthrobacter chlorophenolicus A6 via cloning, overexpression, and subsequent purification. This recombinant enzyme was immobilized on SWCNTs by physical adsorption and covalent coupling in the absence and presence of N-hydroxysuccinimide. The immobilization yield was as high as 52.1xa0%, and a high level of enzyme activity of up to 64.7xa0% was preserved after immobilization. Kinetic analysis showed that the substrate utilization rates (vmax) and catalytic efficiencies (kcat/KM) of the immobilized enzyme for all substrates evaluated were similar to those of the free enzyme, indicating minimal loss of enzyme activity during immobilization. The immobilized enzyme was more stable toward extreme pH, temperature, and ionic strength conditions than the free enzyme. Thus, the oxidative enzyme immobilized on SWCNTs can be used as an effective and stable biocatalyst for the biochemical remediation process if further investigations would be carried out under field conditions.

Identification of the upstream 4-chlorophenol biodegradation pathway using a recombinant monooxygenase from Arthrobacter chlorophenolicus A6

This study aimed to clarify the initial 4-chlorophenol (4-CP) biodegradation pathway promoted by a two-component flavin-diffusible monooxygenase (TC-FDM) consisting of CphC-I and CphB contained in Arthrobacter chlorophenolicus A6 and the decomposition function of CphC-I. The TC-FDM genes were cloned from A. chlorophenolicus A6, and the corresponding enzymes were overexpressed. Since CphB was expressed in an insoluble form, Fre, a flavin reductase obtained from Escherichia coli, was used. These enzymes were purified using Ni2+-NTA resin. It was confirmed that TC-FDM catalyzes the oxidation of 4-CP and the sequential conversion of 4-CP to benzoquinone (BQN)→hydroquinone (HQN)→HQL. This indicated that CphC-I exhibits substrate specificity for 4-CP, BQN, and HQN. The activity of CphC-I for 4-CP was 63.22U/mg-protein, and the Michaelis-Menten kinetic parameters were vmax=0.21mM/min, KM=0.19mM, and kcat/KM=0.04mM-1min-1. These results would be useful for the development of a novel biochemical treatment technology for 4-CP and phenolic hydrocarbons.