Hande Ustunel

A tunable carbon nanotube electromechanical oscillator

Nanoelectromechanical systems (NEMS) hold promise for a number of scientific and technological applications. In particular, NEMS oscillators have been proposed for use in ultrasensitive mass detection, radio-frequency signal processing, and as a model system for exploring quantum phenomena in macroscopic systems. Perhaps the ultimate material for these applications is a carbon nanotube. They are the stiffest material known, have low density, ultrasmall cross-sections and can be defect-free. Equally important, a nanotube can act as a transistor and thus may be able to sense its own motion. In spite of this great promise, a room-temperature, self-detecting nanotube oscillator has not been realized, although some progress has been made. Here we report the electrical actuation and detection of the guitar-string-like oscillation modes of doubly clamped nanotube oscillators. We show that the resonance frequency can be widely tuned and that the devices can be used to transduce very small forces.

Electron−Phonon Scattering in Metallic Single-Walled Carbon Nanotubes

Electron scattering rates in metallic single-walled carbon nanotubes are studied using an atomic force microscope as an electrical probe. From the scaling of the resistance of the same nanotube with length in the low- and high-bias regimes, the mean-free paths for both regimes are inferred. The observed scattering rates are consistent with calculations for acoustic-phonon scattering at low biases and zone boundary/optical phonon scattering at high biases.

High-capacity hydrogen storage by metallized graphene

First-principles plane wave calculations predict that Li can be adsorbed on graphene forming a uniform and stable coverage on both sides. A significant part of the electronic charge of the Li 2s orbital is donated to graphene and is accommodated by its distorted π*-bands. As a result, semimetallic graphene and semiconducting graphene ribbons change into good metals. It is even more remarkable that Li covered graphene can serve as a high-capacity hydrogen storage medium with each adsorbed Li absorbing up to four H2 molecules amounting to a gravimetric density of 12.8wt%.

Modeling a Suspended Nanotube Oscillator

We present a general study of oscillations in suspended one-dimensional elastic systems clamped at each end, exploring a wide range of slack (excess length) and downward external forces. Our results apply directly to recent experiments in nanotube and silicon nanowire oscillators. We find the behavior to simplify in three well-defined regimes which we present in a dimensionless phase diagram. The frequencies of vibration of such systems are found to be extremely sensitive to slack.

Electronic properties of the boroxine–gold interface: evidence of ultra-fast charge delocalization

We performed a combined experimental and theoretical study of the assembly of phenylboronic acid on the Au(111) surface, which is found to lead to the formation of triphenylboroxines by spontaneous condensation of trimers of molecules. The interface between the boroxine group and the gold surface has been characterized in terms of its electronic properties, revealing the existence of an ultra-fast charge delocalization channel in the proximity of the oxygen atoms of the heterocyclic group. More specifically, the DFT calculations show the presence of an unoccupied electronic state localized on both the oxygen atoms of the adsorbed triphenylboroxine and the gold atoms of the topmost layer. By means of resonant Auger electron spectroscopy, we demonstrate that this interface state represents an ultra-fast charge delocalization channel. Boroxine groups are among the most widely adopted building blocks in the synthesis of covalent organic frameworks on surfaces. Our findings indicate that such systems, typically employed as templates for the growth of organic films, can also act as active interlayers that provide an efficient electronic transport channel bridging the inorganic substrate and organic overlayer.

Metallization of the C60/Rh(100) interface revealed by valence photoelectron spectroscopy and density functional theory calculations.

The electronic structure of single and multiple layers of C(60) molecules deposited on a Rh(100) surface is investigated by means of valence photoemission spectroscopy and density functional theory calculations. The binding of the fullerene monolayer to the metal surface yields the appearance of a new state in the valence band spectrum crossing the Fermi level. Insight into the metallization of the metal/fullerene interface is provided by the calculated electronic structure that allows us to correlate the measured interface state with a strong hybridization between the Rh metal states and the highest and lowest molecular orbitals. This results in a net charge transfer of approximately 0.5e-0.6e from the metal to the p states of the interfacial C atoms. The charge transfer is shown to be very short range, involving only the C atoms bound to the metal. The electronic structure of the second C(60) layer is already insulating and resembles the one measured for C(60) multilayers supported by the same substrate or calculated for fullerenes isolated in vacuum. The discussion of the results in the context of other C(60)/metal systems highlights the distinctive electronic properties of the molecule/metal interface determined by the Rh support.

Ab initio mechanical response: internal friction and structure of divacancies in silicon.

This Letter introduces an ab initio study of the full activation-volume tensor of crystalline defects as a means to make contact with mechanical response experiments. We present a theoretical framework for the prediction of the internal friction associated with divacancy defects and give the first ab initio value for this quantity in silicon. Finally, making a connection with defect alignment studies, we give the first unambiguous resolution of the debate surrounding ab initio verification of the ground-state structure of the defect.

Structural and electronic properties of bulk and low-index surfaces of zincblende PtC

Transition metal carbides have been extensively used in diverse applications over the past decade. Their versatility is in part thanks to their unique bonding, which displays a mixture of ionic, metallic and covalent character. While the bulk structure of zincblende (ZB) PtC has been investigated several times, a detailed understanding of the electronic and structural properties of its low-index surfaces is lacking. In this work, we present an ab initio investigation of the properties of five crystallographic ZB PtC surfaces (Pt/C-terminated PtC(1 0 0), PtC(1 1 0) and Pt/C-terminated PtC(1 1 1)). Upon geometry optimization, both polar and nonpolar surfaces undergo a mild interlayer relaxation, without extensive reconstructions. Calculated vacancy formation energies indicate facile C removal on the (1 1 1) surface while Pt-vacancy formation is endothermic. Finally, atomic O adsorption energies on all surfaces reveal a high affinity of the C-terminated surfaces towards this species.

Effect of Platinum, Gold, and Potassium Additives on the Surface Chemistry of CdI2-Antitype Mo2C

Transition metal carbides are versatile materials for diverse industrial applications including catalysis, where their relatively low cost is very attractive. In this work, we present a rather extensive density functional theory study on the energetics of adsorption of a selection of atomic and molecular species on two Mo terminations of the CdI2 antitype phase of Mo2C. Moreover, the coadsorption of CO in the presence of preadsorbed metal atoms and its dissociative adsorption in the absence and presence of preadsorbed Pt and K were investigated. By using CO as a probe to understand the structural/electronic effects of the preadsorption of the metal atoms on the Mo2C(001) surface, we showed that K further enhances CO adsorption/activation on the surface, in contrast to the precious metals considered. Moreover, it was observed that the presence of both Pt and K stabilizes the transition state for the C–O bond dissociation, lowering the activation barrier for the dissociation of the C–O bond by about 0.3 and 0.4 eV, respectively.

Comparative Analysis of Reactant and Product Adsorption Energies in the Selective Oxidative Coupling of Alcohols to Esters on Au(111)

Gold-based heterogeneous catalysts have attracted significant attention due to their selective partial oxidation capabilities, providing promising alternatives for the traditional industrial homogeneous catalysts. In the current study, the energetics of adsorption/desorption of alcohols (CH3OH/methanol, CH3CH2OH/ethanol, CH3CH2CH2OH/n-propanol) and esters (HCOOCH3/methyl formate, CH3COOCH3/methyl acetate, and CH3COOCH2CH3/ethyl acetate) on a planar Au(111) surface was investigated in conjunction with oxidative coupling reactions by means of temperature programmed desorption (TPD) and dispersion-corrected density functional theory (DFT) calculations. The results reveal a complex interplay between inter-molecular and surface-molecule interactions, both mediated by weak van der Waals forces, which dictates their relative stability on the gold surface. Both experimental and theoretical adsorption/desorption energies of the investigated esters are lower than those of the alcohols from which they originate through oxidative coupling reactions. This result can be interpreted as an important indication in favor of the selectivity of Au surfaces in alcohol oxidative coupling/partial oxidation reactions, allowing facile removal of partial oxidation products immediately after their generation preventing their complete oxidation to higher oxygenates.