Helena Bysell

Microgels and microcapsules in peptide and protein drug delivery

The present review focuses on the interaction of microgels and microcapsules with biological macromolecules, particularly peptides and proteins, as well as drug delivery applications of such systems. Results from recent studies on factors affecting peptide/protein binding to, and release from, microgels and related systems are discussed, including effects of network properties, as well as protein aggregation, peptide length, hydrophobicity and charge (distributions), secondary structure, and cyclization. Effects of ambient conditions (pH, ionic strength, temperature, etc.) are also discussed, all with focus on factors of importance for the performance of microgel and microcapsule delivery systems for biomacromolecular drugs.

Recombinant spider silk as matrices for cell culture

The recombinant miniature spider silk protein, 4RepCT, was used to fabricate film, foam, fiber and mesh matrices of different dimensionality, microstructure and nanotopography. These matrices were evaluated regarding their suitability for cell culturing. Human primary fibroblasts attached to and grew well on all matrix types, also in the absence of serum proteins or other animal-derived additives. The highest cell counts were obtained on matrices combining film and fiber/mesh. The cells showed an elongated shape that followed the structure of the matrices and exhibited prominent actin filaments. Moreover, the fibroblasts produced, secreted and deposited collagen type I onto the matrices. These results, together with findings of the matrices being mechanically robust, hold promise not only for in vitro cell culturing, but also for tissue engineering applications.

Effect of Charge Density on the Interaction between Cationic Peptides and Oppositely Charged Microgels

The effect of charge density on the interaction between cationic peptides and oppositely charged poly(acrylic acid-co-acrylamide) microgels was investigated together with effects of charge localization and interplay between electrostatic and hydrophobic interactions. The microgel charge content was controlled by varying acrylic acid/acrylamide ratios (25/75-100/0 mol %) in the microgel synthesis, whereas peptide charge density was controlled by using monodisperse peptides containing alanine and lysine in a series of repeated patterns (25-50 mol % lysine). Results show that peptide uptake in the microgels is largely determined by microgel charge density, whereas peptide-induced microgel deswelling kinetics is influenced by peptide charge density to a higher degree. Furthermore, electrolyte-induced peptide detachment is highly influenced by both microgel and peptide charge density. Thus, at high charge contrast, peptides could not be detached from the microgels, whereas reducing the charge density of either peptide or microgel promoted electrolyte-induced peptide release. The localization of charges in the peptide sequence also plays a significant role as the interaction strength increased for peptides where all charged groups are located at the end of the sequence, as opposed to homogenously distributed throughout the peptide. Such an asymmetrically charged peptide thus displayed higher uptake, faster deswelling response, and lower release degrees than its homogeneously charged analogue in microgels with high charge content, while these differences were absent for lower microgel charge densities. Hydrophobic substitutions (alanine --> leucine) in the peptide chain at fixed charge content increased peptide binding strength and eliminated peptide detachment at high ionic strength. Theoretical modeling of the effect of peptide and microgel charge density on peptide-induced microgel deswelling gave good agreement with experimental results.

Binding and Release of Consensus Peptides by Poly(acrylic acid) Microgels.

The interaction between positively charged consensus peptides and poly(acrylic acid) microgels was investigated with micromanipulator-assisted light microscopy and confocal laser scanning microscopy. Peptide binding and release was monitored by microgel deswelling and swelling for monodisperse multiples of heparin-binding Cardin and Weintraub motifs, (AKKARA)(n) (1 <or= n <or= 4) and (ARKKAAKA)(n) (1 <or= n <or= 3), as well as the corresponding titratable (AHHAHA)(4) and (AHHHAAHA)(3) peptides (A, K, R and H, refering to alanine, lysine, arginine, and histidine, respectively). When fully charged, these peptides distribute homogenously throughout the microgels and display concentration-dependent deswelling, which increases with increasing peptide length. Both (AKKARA)(4) and (ARKKAAKA)(3) display potent and fast microgel deswelling but only marginal subsequent electrolyte-induced desorption. In contrast, reducing the peptide charge for (AHHAHA)(4) and (AHHHAAHA)(3) at neutral and high pH, or the peptide length, substantially reduces the peptide affinity for the microgels and facilitates rapid peptide release. Taken together, the results also show that quite short peptides of moderate charge density interact strongly and cause extensive gel deswelling of oppositely charged microgels, precluding peptide release. They also show, however, that desirable triggered release can be achieved with peptides of lower charge density.

Lipid-based liquid crystals as carriers for antimicrobial peptides : Phase behavior and antimicrobial effect

The number of antibiotic-resistant bacteria is increasing worldwide, and the demand for novel antimicrobials is constantly growing. Antimicrobial peptides (AMPs) could be an important part of future treatment strategies of various bacterial infection diseases. However, AMPs have relatively low stability, because of proteolytic and chemical degradation. As a consequence, carrier systems protecting the AMPs are greatly needed, to achieve efficient treatments. In addition, the carrier system also must administrate the peptide in a controlled manner to match the therapeutic dose window. In this work, lyotropic liquid crystalline (LC) structures consisting of cubic glycerol monooleate/water and hexagonal glycerol monooleate/oleic acid/water have been examined as carriers for AMPs. These LC structures have the capability of solubilizing both hydrophilic and hydrophobic substances, as well as being biocompatible and biodegradable. Both bulk gels and discrete dispersed structures (i.e., cubosomes and hexosomes) have been studied. Three AMPs have been investigated with respect to phase stability of the LC structures and antimicrobial effect: AP114, DPK-060, and LL-37. Characterization of the LC structures was performed using small-angle X-ray scattering (SAXS), dynamic light scattering, ζ-potential, and cryogenic transmission electron microscopy (Cryo-TEM) and peptide loading efficacy by ultra performance liquid chromatography. The antimicrobial effect of the LCNPs was investigated in vitro using minimum inhibitory concentration (MIC) and time-kill assay. The most hydrophobic peptide (AP114) was shown to induce an increase in negative curvature of the cubic LC system. The most polar peptide (DPK-060) induced a decrease in negative curvature while LL-37 did not change the LC phase at all. The hexagonal LC phase was not affected by any of the AMPs. Moreover, cubosomes loaded with peptides AP114 and DPK-060 showed preserved antimicrobial activity, whereas particles loaded with peptide LL-37 displayed a loss in its broad-spectrum bactericidal properties. AMP-loaded hexosomes showed a reduction in antimicrobial activity.

Transport of poly-L-lysine into oppositely charged poly(acrylic acid) microgels and its effect on gel deswelling.

The interaction between poly-L-lysine (pLys) and oppositely charged poly(acrylic acid) (pAA) microgels (Ø approximately 80-120 microm) was studied by micromanipulator-assisted light microscopy and confocal laser scanning microscopy. The aim of this study was to investigate effects of peptide size, pH, and salt concentration on binding, transport, and distribution of pLys in pAA microgel particles and thereby also to outline the details of the gel deswelling in response to pLys binding and incorporation. Both peptide distribution and gel deswelling kinetics were found to be strongly influenced by the pLys molecular weight, originating partly from limited entry of large peptides into the gel particle core. Also pH was shown to influence both deswelling and pLys incorporation kinetics, with a decreased deswelling rate observed with increasing pH. These effects are determined by a complex interplay between the pH-dependence of both pLys and the gel network, also influencing volume transitions of the latter. Finally, salt concentration was shown to have a significant effect on both gel deswelling rate and pLys transport, with an increased electrolyte concentration resulting in decreased deswelling rate but also in an increased peptide transport rate within the microgel particles.

Interactions between homopolypeptides and lightly cross-linked microgels.

The relative importance of electrostatic and nonelectrostatic interactions in peptide-microgel systems was evaluated by micromanipulator-assisted light microscopy, confocal microscopy, and circular dichroism. For this purpose, the interaction of various homopolypeptides with lightly cross-linked polyelectrolyte gel particles ( approximately 70 microm in diameter) was studied with focus on peptide-induced microgel deswelling and its relation to peptide distribution within the microgel particles. Negatively charged poly-l-glutamic acid (pGlu) and poly-l-aspartic acid (pAsp), as well as uncharged poly-l-proline (pPro) and poly-l-threonine (pThr), were found to not bind to negatively charged poly(acrylic acid) microgels under the conditions investigated, but were instead depleted from the microgel particles. Positively charged poly-l-arginine (pArg), poly-l-histidine (pHis), and poly-l-lysine (pLys), on the other hand, interacted strongly with the oppositely charged microgel particles and caused significant deswelling of these. In parallel, cationic acrylamidopropyltriethylammoniumchloride (APTAC) microgels bound negatively charged polypeptides to a much higher extent than positively charged and uncharged ones. These findings suggest that electrostatic interactions dominate peptide binding and resulting microgel deswelling in these systems. Nevertheless, although the amount of cationic peptide bound to the anionic microgel particles was similar for cationic pLys, pArg, and pHis, peptide-induced gel deswelling differed significantly, as did the change in peptide conformation after microgel binding and the peptide distribution within the microgels. These effects, as well as pH dependent binding and release of titrable pHis, are discussed in terms of the effects of the charge density of, and structural differences between, the cationic homopolypeptides on the interaction with the oppositely charged microgel particles.

Effects of Peptide Secondary Structure on the Interaction with Oppositely Charged Microgels.

The importance of peptide secondary structure on the interaction between antimicrobial peptides and oppositely charged poly(acrylic acid-co-acrylamide) microgels of various charge density was investigated for EFKRIVQRIKDFLRNLV (EFK17). Through D-enantiomer (EFK17-d/a; E(dF)KR(dI)VQR(dI)KD(dF)LRNLV) or tryptophan (EFK17-W/a; EWKRWVQRWKDFLRNLV) substitutions, both conformation-dependent and -independent amphiphilicity of this peptide could be precisely controlled. Peptide secondary structure was investigated by circular dichroism, whereas microgel deswelling and reswelling in response to peptide binding and release were studied by micromanipulator-assisted light and fluorescence microscopy, and peptide uptake in the microgels was determined from solution depletion measurements. Results show that peptide binding to the microgel is highly influenced by peptide secondary structure. EFK17-a, characterized by an idealized helix with all polar/charged amino acids located at one side of the helix, and all nonpolar/hydrophobic residues on the other, displays pronounced α-helix induction on peptide binding to the microgels. EFK17-d/a, on the other hand, displays no such amphiphilic helix induction. Mirroring this, EFK17-a displays substantially higher binding to the microgels than EFK17-d/a as well as much larger peptide-induced microgel deswelling. For EFK17-W/a, both conformation-dependent and -independent amphiphilicity effects were demonstrated. Overall, the results show that peptide conformational aspects need to be considered in peptide/microgel interactions, for example, in the design of microgel carrier systems for peptide drugs.

Peptide-microgel interactions in the strong coupling regime.

The interaction between lightly cross-linked poly(acrylic acid) microgels and oppositely charged peptides was investigated as a function of peptide length, charge density, pH, and salt concentration, with emphasis on the strong coupling regime at high charge contrast. By micromanipulator-assisted light microscopy, the equilibrium volume response of single microgel particles upon oligolysine and oligo(lysine/alanine) absorption could be monitored in a controlled fashion. Results show that microgel deswelling, caused by peptide binding and network neutralization, increases with peptide length (3 < 5 < 10) and charge density (30% < 50% < 100%). Furthermore, oligomer-induced microgel deswelling was more pronounced at pH 5 than at pH 8, reflecting the lower network charge density in the former case (pK(a) for the isolated acrylic acid ≈4.7). In order to describe these highly coupled systems, a model was developed, in which counterion/peptide-mediated electrostatic attraction between the network chains is described using an exponential force law, and the network elasticity by the inverse Langevin theory. The model was used to calculate the composition of microgels in contact with reservoir solutions of peptides and simple electrolytes. At high electrostatic coupling, the calculated swelling curves were found to display first-order phase transition behavior. The model was demonstrated to capture pH- and electrolyte-dependent microgel swelling, as well as effects of peptide length and charge density on microgel deswelling. The analysis demonstrated that the peptide charge (length), rather than the peptide charge density, determines microgel deswelling. Furthermore, a transition between continuous and discrete network collapse was identified, consistent with experimental results in the present investigations, as well as with results from the literature on microgel deswelling caused by multivalent cations.

Cubosomes post-loaded with antimicrobial peptides: characterization, bactericidal effect and proteolytic stability

Novel antibiotics, such as antimicrobial peptides (AMPs), have recently attended more and more attraction. In this work, dispersed cubic liquid crystalline gel (cubosomes) was used as drug delivery vehicles for three AMPs (AP114, DPK-060 and LL-37). Association of peptides onto cubosomes was studied at two cubosome/peptide ratios using high performance liquid chromatography, ζ-potential and circular dichroism measurements. AMPs impact on the cubosome structure was investigated using small angle x-ray scattering and cryogenic transmission electron microscopy. The antimicrobial effect of the AMP loaded cubosomes was studied in vitro by minimum inhibitory concentration and time-kill assays. Proteolytic protection was investigated by incubating the formulations with two elastases and the antimicrobial effect after proteolysis was studied using radial diffusion assay. Different association efficacy onto the cubosomes was observed among the AMPs, with LL-37 showing greatest association (>60%). AP114 loaded cubosomes displayed a preserved antimicrobial effect, whereas for LL-37 the broad spectrum bacterial killing was reduced to only comprise Gram-negative bacteria. Interestingly, DPK-060 loaded cubosomes showed a slight enhanced effect against S. aureus and E. coli strains. Moreover, the cubosomes were found to protect LL-37 from proteolytic degradation, resulting in a significantly better bactericidal effect after being subjected to elastase, compared to unformulated peptide.