Hong Nam Kim

A nontransferring dry adhesive with hierarchical polymer nanohairs

We present a simple yet robust method for fabricating angled, hierarchically patterned high-aspect-ratio polymer nanohairs to generate directionally sensitive dry adhesives. The slanted polymeric nanostructures were molded from an etched polySi substrate containing slanted nanoholes. An angled etching technique was developed to fabricate slanted nanoholes with flat tips by inserting an etch-stop layer of silicon dioxide. This unique etching method was equipped with a Faraday cage system to control the ion-incident angles in the conventional plasma etching system. The polymeric nanohairs were fabricated with tailored leaning angles, sizes, tip shapes, and hierarchical structures. As a result of controlled leaning angle and bulged flat top of the nanohairs, the replicated, slanted nanohairs showed excellent directional adhesion, exhibiting strong shear attachment (≈26 N/cm2 in maximum) in the angled direction and easy detachment (≈2.2 N/cm2) in the opposite direction, with a hysteresis value of ≈10. In addition to single scale nanohairs, monolithic, micro-nanoscale combined hierarchical hairs were also fabricated by using a 2-step UV-assisted molding technique. These hierarchical nanoscale patterns maintained their adhesive force even on a rough surface (roughness <20 μm) because of an increase in the contact area by the enhanced height of hierarchy, whereas simple nanohairs lost their adhesion strength. To demonstrate the potential applications of the adhesive patch, the dry adhesive was used to transport a large-area glass (47.5 × 37.5 cm2, second-generation TFT-LCD glass), which could replace the current electrostatic transport/holding system with further optimization.

Direct differentiation of human embryonic stem cells into selective neurons on nanoscale ridge/groove pattern arrays

Human embryonic stem cells (hESCs) are pluripotent cells that have the potential to be used for tissue engineering and regenerative medicine. Repairing nerve injury by differentiating hESCs into a neuronal lineage is one important application of hESCs. Biochemical and biological agents are widely used to induce hESC differentiation. However, it would be better if we could induce differentiation of hESCs without such agents because these factors are expensive and it is difficult to control the optimal concentrations for efficient differentiation with reduced side effects. Moreover, the mechanism of differentiation induced by these factors is still not fully understood. In this study, we present evidence that nanoscale ridge/groove pattern arrays alone can effectively and rapidly induce the differentiation of hESCs into a neuronal lineage without the use any differentiation-inducing agents. Using UV-assisted capillary force lithography, we constructed nanoscale ridge/groove pattern arrays with a dimension and alignment that were finely controlled over a large area. Human embryonic stem cells seeded onto the 350-nm ridge/groove pattern arrays differentiated into neuronal lineage after five days, in the absence differentiation-inducing agents. This nanoscale technique could be used for a new neuronal differentiation protocol of hESCs and may also be useful for nanostructured scaffolding for nerve injury repair.

Nanotopography-guided tissue engineering and regenerative medicine ☆

Human tissues are intricate ensembles of multiple cell types embedded in complex and well-defined structures of the extracellular matrix (ECM). The organization of ECM is frequently hierarchical from nano to macro, with many proteins forming large scale structures with feature sizes up to several hundred microns. Inspired from these natural designs of ECM, nanotopography-guided approaches have been increasingly investigated for the last several decades. Results demonstrate that the nanotopography itself can activate tissue-specific function in vitro as well as promote tissue regeneration in vivo upon transplantation. In this review, we provide an extensive analysis of recent efforts to mimic functional nanostructures in vitro for improved tissue engineering and regeneration of injured and damaged tissues. We first characterize the role of various nanostructures in human tissues with respect to each tissue-specific function. Then, we describe various fabrication methods in terms of patterning principles and material characteristics. Finally, we summarize the applications of nanotopography to various tissues, which are classified into four types depending on their functions: protective, mechano-sensitive, electro-active, and shear stress-sensitive tissues. Some limitations and future challenges are briefly discussed at the end.

Patterning Methods for Polymers in Cell and Tissue Engineering

Polymers provide a versatile platform for mimicking various aspects of physiological extracellular matrix properties such as chemical composition, rigidity, and topography for use in cell and tissue engineering applications. In this review, we provide a brief overview of patterning methods of various polymers with a particular focus on biocompatibility and processability. The materials highlighted here are widely used polymers including thermally curable polydimethyl siloxane, ultraviolet-curable polyurethane acrylate and polyethylene glycol, thermo-sensitive poly(N-isopropylacrylamide) and thermoplastic and conductive polymers. We also discuss how micro- and nanofabricated polymeric substrates of tunable elastic modulus can be used to engineer cell and tissue structure and function. Such synergistic effect of topography and rigidity of polymers may be able to contribute to constructing more physiologically relevant microenvironment.

Nanopatterned cardiac cell patches promote stem cell niche formation and myocardial regeneration.

Stem cell-based methods for myocardial regeneration suffer from considerable cell attrition. Artificial matrices reproducing mechanical and structural properties of the native tissue may facilitate survival, retention and functional integration of adult stem or progenitor cells, by conditioning the cells prior to, and during, transplantation. Here we combined autologous cardiosphere-derived cells (CDCs) with nanotopographically defined hydrogels mimicking the native myocardial matrix, to form in vitro cardiac stem cell niches, and control cell function and fate. These platforms were used to produce cardiac patches that could be transplanted at the site of infarct. In culture, highly anisotropic, but not more randomized nanotopographic, control augmented cell adhesion, migration, and proliferation. It also dramatically enhanced early, and, in the presence of mature cardiomyocytes, late cardiomyogenesis. Nanotopography sensing and transcriptional response was mediated via p190RhoGAP. In a rat infarction model, engraftment of nanofabricated scaffolds with CDCs enhanced retention and growth of transplanted cells, and their integration with the host tissue. The infarcted ventricle wall increased in thickness, with higher cell viability and better collagen organization. These results suggest that nanostructured polymeric materials that closely mimic the extracellular matrix structure on which cardiac cells reside in vivo can be both very effective tools in investigating the mechanisms of cardiac differentiation and the basis for cardiac tissue engineering, thus facilitating stem cell-based therapy in the heart.

25th Anniversary Article: Scalable Multiscale Patterned Structures Inspired by Nature: the Role of Hierarchy

Multiscale, hierarchically patterned surfaces, such as lotus leaves, butterfly wings, adhesion pads of gecko lizards are abundantly found in nature, where microstructures are usually used to strengthen the mechanical stability while nanostructures offer the main functionality, i.e., wettability, structural color, or dry adhesion. To emulate such hierarchical structures in nature, multiscale, multilevel patterning has been extensively utilized for the last few decades towards various applications ranging from wetting control, structural colors, to tissue scaffolds. In this review, we highlight recent advances in scalable multiscale patterning to bring about improved functions that can even surpass those found in nature, with particular focus on the analogy between natural and synthetic architectures in terms of the role of different length scales. This review is organized into four sections. First, the role and importance of multiscale, hierarchical structures is described with four representative examples. Second, recent achievements in multiscale patterning are introduced with their strengths and weaknesses. Third, four application areas of wetting control, dry adhesives, selectively filtrating membranes, and multiscale tissue scaffolds are overviewed by stressing out how and why multiscale structures need to be incorporated to carry out their performances. Finally, we present future directions and challenges for scalable, multiscale patterned surfaces.

Effect of orientation and density of nanotopography in dermal wound healing

We report on the effect of synthetic extracellular matrix (ECM) scaffold in the form of uniformly-spaced nanogrooved surfaces in dermal wound healing. The rate of wound coverage was measured on various nanotopographical densities with vertical or parallel orientation using nanogrooves of 550 nm width with three different gaps of 550, 1100, and 2750 nm (spacing ratio: 1:1, 1:2 and 1:5). Guided by the nanotopographical cues in the absence of growth factors in wound healing process, the cultured NIH-3T3 cells demonstrated distinctly different migration speed, cell division, and ECM production as dictated by the topographical density and orientation, whereas the proliferation rate turned out to be nearly the same. Based on our experimental results, the nanopattern of 1:2 spacing ratio yielded the best wound healing performance in terms of migration speed, which seems similar to the natural organization of collagen fibers.

Modulus- and surface energy-tunable ultraviolet-curable polyurethane acrylate: properties and applications

Since the introduction of ultraviolet (UV)-curable polyurethane acrylate (PUA) materials in 2004, our group has extensively used the material in various applications ranging from nanopatterning, biomimetics, microfluidics, to tissue engineering. In this highlight, we aim to provide a brief overview of the properties and applications of PUA with particular focus on the ability of tuning modulus (20–320 MPa) and surface energy (20–60 mJ m−2). These unique features enable us to use the material in various patterning applications as a mold and a patterned film, respectively. In addition, one can benefit from several other features of PUA such as self-replication, partial curing, flexibility, biocompatibility, and transparency. These issues are also briefly described along with their applications.

Designing nanotopographical density of extracellular matrix for controlled morphology and function of human mesenchymal stem cells

Inspired by ultrastructural analysis of ex vivo human tissues as well as the physiological importance of structural density, we fabricated nanogrooves with 1:1, 1:3, and 1:5 spacing ratio (width:spacing, width = 550 nm). In response to the nanotopographical density, the adhesion, migration, and differentiation of human mesenchymal stem cells (hMSCs) were sensitively controlled, but the proliferation showed no significant difference. In particular, the osteo- or neurogenesis of hMSCs were enhanced at the 1:3 spacing ratio rather than 1:1 or 1:5 spacing ratio, implying an existence of potentially optimized nanotopographical density for stem cell function. Furthermore, such cellular behaviors were positively correlated with several cell morphological indexes as well as the expression of integrin β1 or N-cadherin. Our findings propose that nanotopographical density may be a key parameter for the design and manipulation of functional scaffolds for stem cell-based tissue engineering and regenerative medicine.

Robust superomniphobic surfaces with mushroom-like micropillar arrays

We present a simple method for the fabrication of robust superomniphobic surfaces with high transmittance (>90%) and durability (<6 months). The method consists of direct micromolding of mushroom-like micropillars and C4F8 gas surface treatment. Such re-entrant structures were found to be highly resistant against wetting by various liquids and oils with a wide range of surface tensions from 22.3 (ethanol) to 72.1 mN m−1 (water). Optimal structural parameters were derived based on the measurements of static contact angle and contact angle hysteresis.