Hongquan Wang

Polyacrylic acid grafted silica fume as an excellent adsorbent for dysprosium(III) removal from industrial wastewater

In the development of industrial life, an enormous amount of silica fume (SF) has been accumulated and cannot be reused properly, and a large quantity of rare-earth elements in industrial wastewater has been inappropriately discharged, both of which pose a threat to human health and the environment. By using UV photocatalytic grafting technology, a polymer brush grafted from modified SF, which can be used as a high efficiency adsorbent, can solve both problems at the same time. Specifically, SF was firstly silanol-functionalized by γ-methacryloxypropyltrimethoxysilane (KH570), then grafted with polyacrylic acid brushes by UV photocatalytic grafting to finally obtain the adsorbent. Under optimal conditions, adsorption capacity of the adsorbent for dysprosium(III) (Dy3+) could reach 278.49 mg/g. It took 1 min for the adsorbent to reach adsorbing equilibrium at a relatively low concentration of Dy3+ (40 mg/L), and only 3 min at a medium and high concentration (130 mg/L and 200 mg/L). After six adsorption-desorption cycles, the adsorbent still possessed high adsorption capacity for Dy3+ (251.20 mg/g). The adsorption behavior of the adsorbent fit the Langmuir isotherm model (R2 > 0.97) and pseudo-second-order kinetic model (R2 > 0.98) well. The functional group of carboxylate anion, -COO-, played a central role during the adsorption process, which was verified by Fourier transform infrared and X-ray photoelectron spectroscopy analyses.

Producing a synthetic zeolite from secondary coal fly ash.

ABSTRACT Secondary coal fly ash is known as a by-product produced by the extracting alumina industry from high-alumina fly ash, which is always considered to be solid waste. Zeolitization of secondary coal fly ash offers an opportunity to create value-added products from this industrial solid waste. The influence of synthesis parameters on zeolite NaA such as alkalinity, the molar ratio of SiO2/Al2O3, crystallization time and temperature was investigated in this paper. It was found that the types of synthetic zeolites produced were to be highly dependent on the conditions of the crystallization process. Calcium ion exchange capacity and whiteness measurements revealed that the synthesized product meets the standard for being used as detergent, indicating a promising use as a builder in detergent, ion-exchangers or selective adsorbents. Yield of up to a maximum of 1.54 g/g of ash was produced for zeolite NaA from the secondary coal fly ash residue. This result presents a potential use of the secondary coal fly ash to obtain a high value-added product by a cheap and alternative zeolitization procedure.