Hongsoo Choi

Tomato yellow leaf curl virus (TYLCV-IL): a seed-transmissible geminivirus in tomatoes

Tomato yellow leaf curl virus (TYLCV) is one of the most well-known tomato-infecting begomoviruses and transmitted by Bemisia tabaci. Seed transmission has previously been reported for some RNA viruses, but TYLCV has not previously been described as a seed-borne virus. In 2013 and 2014, without whitefly-mediated transmission, TYLCV was detected in young tomato plants germinated from fallen fruits produced from TYLCV-infected tomato plants in the previous cultivation season. In addition, TYLCV-Israel (TYLCV-IL) was also detected in seeds and their seedlings of TYLCV-infected tomato plants that were infected by both viruliferous whitefly-mediated transmission and agro-inoculation. The seed infectivity was 20–100%, respectively, and the average transmission rate to seedlings was also 84.62% and 80.77%, respectively. TYLCV-tolerant tomatoes also produced TYLCV-infected seeds, but the amount of viral genome was less than seen in TYLCV-susceptible tomato plants. When tomato plants germinated from TYLCV-infected seeds, non-viruliferous whiteflies and healthy tomato plants were placed in an insect cage together, TYLCV was detected from whiteflies as well as receiver tomato plants six weeks later. Taken together, TYLCV-IL can be transmitted via seeds, and tomato plants germinated from TYLCV-infected seeds can be an inoculum source of TYLCV. This is the first report about TYLCV seed transmission in tomato.

Noncytotoxic artificial bacterial flagella fabricated from biocompatible ORMOCOMP and iron coating

Magnetic microrobots have potential use in biomedical applications such as minimally invasive surgery, targeted diagnosis and therapy. Inspired by nature, artificial bacterial flagella (ABFs) are a form of microrobot powered by magnetic helical propulsion. For the promise of ABFs to be realized, issues of biocompatibility must be addressed and the materials used in their fabrication should be carefully considered. In this work, we fabricate the helical bodies of ABFs from a commercially available biocompatible photoresist, ORMOCOMP, by subsequently coating them with Fe for magnetic actuation. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays show that Fe-coated ORMOCOMP layers do not undermine the cell viability during 72 hours of incubation compared to control substrates. Cells exhibit normal morphology on ABF arrays and show good lamellipodial and filopodial interactions with the ABF surfaces. The swimming performance of Fe-coated ABFs is characterized using a three-pair Helmholtz coil arrangement. ABFs exhibit a maximum forward speed of 48.9 μm s-1 under a field of 9 mT at a frequency of 72 Hz. In summary, our Fe-coated ABFs exhibit little cytotoxicity and have potential for in vivo applications, especially those involving difficult to access regions within the human body.

Magnetic Actuation Based Motion Control for Microrobots: An Overview

Untethered, controllable, mobile microrobots have been proposed for numerous applications, ranging from micro-manipulation, in vitro tasks (e.g., operation of microscale biological substances) to in vivo applications (e.g., targeted drug delivery; brachytherapy; hyperthermia, etc.), due to their small-scale dimensions and accessibility to tiny and complex environments. Researchers have used different magnetic actuation systems allowing custom-designed workspace and multiple degrees of freedom (DoF) to actuate microrobots with various motion control methods from open-loop pre-programmed control to closed-loop path-following control. This article provides an overview of the magnetic actuation systems and the magnetic actuation-based control methods for microrobots. An overall benchmark on the magnetic actuation system and control method is also discussed according to the applications of microrobots.

Fabrication of a two-dimensional piezoelectric micromachined ultrasonic transducer array using a top-crossover-to-bottom structure and metal bridge connections

A new design methodology and fabrication process for two-dimensional (2D) piezoelectric micromachined ultrasonic transducer (pMUT) arrays using a top-crossover-to-bottom (TCTB) structure was developed. Individual sensing and actuation of pMUT elements from a small number of connection lines was enabled by the TCTB structure, and the parasitic coupling capacitance of the array was significantly reduced as a result. A 32 × 32 pMUT array with a TCTB structure was fabricated, resulting in 64 connection lines over an area of 4.8 × 4.8 mm2. The top electrodes for each pMUT element were re-connected by metal bridging after bottom-electrode etching caused them to become disconnected. A deep reactive ion etching process was used to compactify the array. Each pMUT element was a circular-shaped K31-type ultrasonic transducer using a 1 µm thick sol–gel lead zirconate titanate (PZT: Pb1.10 Zr0.52 Ti0.48) thin film. To characterize a single element in the 2D pMUT array, the resonant frequency and coupling coefficient of 20 pMUT elements were averaged to 3.85 MHz and 0.0112, respectively. The maximum measured ultrasound intensity in water, measured at a distance of 4 mm, was 4.6 µW cm−2 from a single pMUT element driven by a 5 Vpp sine wave at 2.22 MHz. Potential applications for development of a TCTB-arranged 2D pMUT array include ultrasonic medical imaging, ultrasonic communication, ultrasonic range-finding and handwriting input systems.

Mechanical frequency selectivity of an artificial basilar membrane using a beam array with narrow supports

The study presented in this paper assessed the frequency selectivity of an artificial basilar membrane (ABM) constructed using a piezoelectric beam array with narrow supports. Three ABM samples were constructed. Each ABM contained 16 beams with various lengths in a one-dimensional array. To experimentally assess the frequency selectivity of the ABM, mechanical vibration induced either by an electrical or an acoustic stimulus was measured with a scanning laser-Doppler vibrometer. The electro-mechanical and acousto-mechanical transfer functions were defined for the same purpose. The tonotopy of each beam array was visualized by post-processing the experimental results. Finite element analyses were conducted to numerically compute the resonance frequencies, identify the associated vibrational modes, and evaluate the harmonic responses of the beams. The influence of the residual stresses existing in the beams was reflected in the geometric models by introducing three different levels of arc-shaped lateral deformations in the beams. The harmonic analyses revealed that each beam of the ABM samples presented independent band-pass characteristics. The experiments and simulations commonly showed a frequency selectivity of the fabricated ABMs in the range of 2?20?kHz. Therefore, the device is suitable for development of a totally implantable artificial cochlea, implementing a mechanical frequency analyzer. This work is part of research to develop a prototype of a totally implantable artificial cochlea.

Fabrication and Manipulation of Ciliary Microrobots with Non-reciprocal Magnetic Actuation

Magnetically actuated ciliary microrobots were designed, fabricated, and manipulated to mimic cilia-based microorganisms such as paramecia. Full three-dimensional (3D) microrobot structures were fabricated using 3D laser lithography to form a polymer base structure. A nickel/titanium bilayer was sputtered onto the cilia part of the microrobot to ensure magnetic actuation and biocompatibility. The microrobots were manipulated by an electromagnetic coil system, which generated a stepping magnetic field to actuate the cilia with non-reciprocal motion. The cilia beating motion produced a net propulsive force, resulting in movement of the microrobot. The magnetic forces on individual cilia were calculated with various input parameters including magnetic field strength, cilium length, applied field angle, actual cilium angle, etc., and the translational velocity was measured experimentally. The position and orientation of the ciliary microrobots were precisely controlled, and targeted particle transportation was demonstrated experimentally.

A microelectromechanical system artificial basilar membrane based on a piezoelectric cantilever array and its characterization using an animal model

We proposed a piezoelectric artificial basilar membrane (ABM) composed of a microelectromechanical system cantilever array. The ABM mimics the tonotopy of the cochlea: frequency selectivity and mechanoelectric transduction. The fabricated ABM exhibits a clear tonotopy in an audible frequency range (2.92–12.6 kHz). Also, an animal model was used to verify the characteristics of the ABM as a front end for potential cochlear implant applications. For this, a signal processor was used to convert the piezoelectric output from the ABM to an electrical stimulus for auditory neurons. The electrical stimulus for auditory neurons was delivered through an implanted intra-cochlear electrode array. The amplitude of the electrical stimulus was modulated in the range of 0.15 to 3.5 V with incoming sound pressure levels (SPL) of 70.1 to 94.8 dB SPL. The electrical stimulus was used to elicit an electrically evoked auditory brainstem response (EABR) from deafened guinea pigs. EABRs were successfully measured and their magnitude increased upon application of acoustic stimuli from 75 to 95 dB SPL. The frequency selectivity of the ABM was estimated by measuring the magnitude of EABRs while applying sound pressure at the resonance and off-resonance frequencies of the corresponding cantilever of the selected channel. In this study, we demonstrated a novel piezoelectric ABM and verified its characteristics by measuring EABRs.

Fabrication of Segmented Au/Co/Au Nanowires: Insights in the Quality of Co/Au Junctions

Electrodeposition is a versatile method, which enables the fabrication of a variety of wire-like nanoarchitectures such as nanowires, nanorods, and nanotubes. By means of template-assisted electrodeposition, segmented Au/Co/Au nanowires are grown in anodic aluminum oxide templates from two different electrolytes. To tailor the properties of the cobalt segments, several electrochemical conditions are studied as a function of current density, pulse deposition, and pH. The morphology, crystal structure, and magnetic properties are accordingly investigated. Changes in the deposition conditions affect the cobalt electrocrystallization process directly. Cobalt tends to crystallize mainly in the hexagonal close-packed structure, which is the reason cobalt might not accommodate satisfactorily on the face-centered cubic Au surface or vice versa. We demonstrate that by modifying the electrolyte and the applied current densities, changes in the texture and the crystalline structure of cobalt lead to a good quality connection between dissimilar segments. In particular, lowering the bath pH, or using pulse plating at a high overpotential, produces polycrystalline fcc Co and thus well-connected Co/Au bimetallic junctions with smooth interface. These are crucial factors to be carefully considered taking into account that nanowires are potential building blocks in micro- and nanoelectromechanical systems.

Survey of Viral Diseases Occurrence on Major Crops in 2007

The severe damage induced by the important viruses of Rice stripe virus (RSV), Cucumber green mottle mosaic virus (CGMMV), Melon necrotic spot virus (MNSV), Tomato spotted wilt virus (TSWV) and Tomato bushy stunt virus (TBSV) was described on major crops in Korea. In 2007, the plot incidence rate of RSV was 100% on the precocious rice cultivars at the Western coastal provinces of Gyeonggido, Chungcheongnamdo, Jellabugdo and Jellanamdo, and Jejudo. RSV occurred in 2,441 ha with incidence rate of 70% over at 5 areas of Seocheon, Seosan, Boryung, Hongsung and Buyou in Chungcheongnamdo. At 4 areas of Buan, Gimje, Gunsan and Gochang in Jellabukdo, RSV occurred in 2.016 ha. CGMMV occurred on watermelon in 4.6 ha at Cheongyang area, and its outbreak was also 890 ha on oriental melon for 120 farmers with the incidence area of 23% against total cultivation areas of Seongju. MNSV was recorded firstly on watermelon in 2006 at Andong and it spread to 3 areas of Hapcheon, Gochang and Yanggu. TSWV occurred firstly at Danggin in Chungcheongnamdo in 2005. TSWV in 2006 spread to 6 areas; Taian, Hongsung and Seosan in Chungcheongnando, Namwon in Jellabukdo, and Sunchon and Kwangju in Jellanamdo. In 2007, TSWV covered 17 areas of western and southern parts; the 5 area including Taian in Chungcheongnamdo, Kwangju in Jellanamdo, Bucheon in Gyunggido, and so forth. TBSV was described firstly on table tomato at Sacheon in Kyungsangnamdo in 2004. TBSV occurred on cherry tomato at Chungju in 2006 and on table tomato at Busan area.

Upshift of Phase Transition Temperature in Nanostructured PbTiO3 Thick Film for High Temperature Applications

Thick polycrystalline pure PbTiO3 films with nano size grains were synthesized for the first time by aerosol deposition. Annealed 7 μm thick films exhibit well-saturated ferroelectric hysteresis loops with a remanent polarization and coercive field of 35 μC/cm(2) and 94 kV/cm, respectively. A large-signal effective d33,eff value of >60 pm/V is achieved at room temperature. The measured ferroelectric transition temperature (Tc) of the films ∼550 °C is >50 °C higher than the reported values (∼490 °C) for PbTiO3 ceramics. First-principles calculations combined with electron energy loss spectroscopy (EELS) and structural analysis indicate that the film is composed of nano size grains with slightly decreased tetragonality. There is no severe off-stoichiometry, but a high compressive in-plane residual stress was observed in the film along with a high transition temperature and piezoelectric response. The ferroelectric characteristics were sustained until 200 °C, providing significant advancement toward realizing high temperature piezoelectric materials.