Husaini Omar

Toxicities and tolerances of Cd, Cu, Pb and Zn in a primary producer (Isochrysis galbana) and in a primary consumer (Perna viridis)

Studies on toxicities and tolerances of cadmium (Cd), copper (Cu), lead (Pb) and zinc (Zn) in the brown alga Isochrysis galbana and in the green-lipped mussel Perna viridis were conducted by short-term bioassays using endpoints growth production and mortality, respectively. The 5-day EC(50) and 24-h LC(50) of these heavy metals were determined in the brown alga and mussel, respectively. The EC(50) values calculated for the alga were 0.74 mg/l for Cd, 0.91 mg/l for Cu, 1.40 mg/l for Pb and 0.60 mg/l for Zn. The LC(50) values for the mussels were 1.53 mg/l for Cd, 0.25 mg/l for Cu, 4.12 mg/l for Pb and 3.20 mg/l for Zn. These LC(50) values were within the concentration ranges as reported by other authors who used P. viridis as the test organism. Based on these EC(50) and LC(50) values, the alga was most sensitive to Zn, followed by Cd, Cu and Pb while the mussel was most sensitive to Cu, followed by Cd, Zn and Pb. Differences in the trophic levels, metal handling strategies, biology and ecology of the primary producer (brown alga) and the primary consumer (mussel) are believed to be the plausible causes for the different toxicities and tolerances of the metals studied.

Allozyme polymorphisms and heavy metal levels in the green-lipped mussel Perna viridis (Linnaeus) collected from contaminated and uncontaminated sites in Malaysia

It has been widely reported that heavy metal contamination in coastal waters can modify the allozyme profiles of marine organisms. Previous studies have recorded elevated metal concentrations in sediments and mussel tissues off Peninsular Malaysia. In the present study, horizontal starch gel electrophoresis was carried out to estimate the levels of allelic variation of the green-lipped mussel, Perna viridis, collected from one contaminated and three relatively uncontaminated sites off Peninsular Malaysia. Fourteen polymorphic loci were observed. In addition, the concentrations of cadmium, copper, lead, mercury and zinc were determined in the sediments and in the soft tissues of the mussels. Mussels from contaminated site, evidenced by high metal pollution indices (MPI) of the sediment and the mussel tissues, showed the highest percentage of polymorphic loci (78.6%), while those collected from the uncontaminated sites had lower MPI of the sediment and mussel tissue, and exhibited lower percentages of polymorphic loci (35.7-57.1%). The population from the contaminated site showed the highest excess of heterozygosity (0.289) when compared to that of the populations from the three uncontaminated sites (0.108-0.149). Allozyme frequencies at the phosphoglucomutase (PGM; E.C. 2.7.5.1) locus also differed between the contaminated and uncontaminated populations. Previous studies have shown that exposure to heavy metals can select or counter-select for particular alleles at this locus. The present results suggest that allozyme polymorphism in P. viridis is a potential biomonitoring tool for heavy metal contamination but further validation is required.

Satellite data potential for landslide studies in tropical regions

Purpose – The purpose of this paper is to show that satellite data applicability for landslides studies is given concentration in tropical regions, which have two limitations; regular cloud cover and thick vegetation.Design/methodology/approach – Landslide studies have three categories: mapping, zonation, and monitoring. High spatial resolution images are convenient for mapping. Since the slope and slope materials are the dominant parameters for slide potential, a high resolution DEM produced from the above data with classification of multispectral data will be vital for zonation. Weather‐free and penetration are advantages that make radar images essential for monitoring.Findings – A composition of satellite data with support of aerial photography, with its high spatial resolution, will give an excellent spatial database for these studies.Originality/value – Satellite remote sensing data are applicable for landslides studies in non‐accessible mountainous tropical regions.

Risk assessment predictions of open dumping area after closure using Monte Carlo simulation

Currently, there are many abandoned open dumping areas that were left without any proper mitigation measures. These open dumping areas could pose serious hazard to human and pollute the environment. The objective of this paper is to determine the risk assessment at the open dumping area after they has been closed using Monte Carlo Simulation method. The risk assessment exercise is conducted at the Kuala Lumpur dumping area. The rapid urbanisation of Kuala Lumpur coupled with increase in population lead to increase in waste generation. It leads to more dumping/landfill area in Kuala Lumpur. The first stage of this study involve the assessment of the dumping area and samples collections. It followed by measurement of settlement of dumping area using oedometer. The risk of the settlement is predicted using Monte Carlo simulation method. Monte Carlo simulation calculates the risk and the long-term settlement. The model simulation result shows that risk level of the Kuala Lumpur open dumping area ranges betwee...

Long-term settlement prediction at open dumping area using Hossein and Gabr method for new development

In Malaysia, the most common method of disposal is landfill/open dumping. The soil at the dumping area are mixed with waste and soil. Thus, it was called as waste soil. Due to its heterogeneity properties, waste soil has a different settlement rate because different types of waste tends to settle differently. The Hussein and Gabr model which used empirical model was proposed to compute the long-term settlement. This Hussein and Gabr model is one of the soil settlement model that can be used to predict the long-term settlement at the dumping area. The model relates between the compression index and the time factor. The time factor are t1, t2, t3 and t4. The compression index is Cα1=compression index and Cβ is biodegradation index. The duration for initial compression, the compression, the biological compression and time creep are included in the model. The sample of waste soil is taken from closed dumping area in Lukut, Negeri Sembilan with the height of waste approximately 1 to 3 meters. The sample is tested using consolidation test for determining the geotechnical parameters and compressibility index. Based on the Hossein and Gabr model, the predicted long-term settlement for 20 years (ΔH) for the waste height of 1 to 3 meters are 0.21m, 0.42m and 0.63m respectively and are below the percentages of proposed maximum settlement for waste soil which is acceptable for new development to takes place.. The types of deep or shallow foundation are proposed based on the predicted settlement. The abandoned open dumping area can now be reused for the new development after the long-term settlement are predicted and some of the precaution measures has been taken as a safety measures.

Granites in Malaysia: From Hard Rock to Clay Minerals

Tropical areas with extreme climates are host to extreme weathering processes and the weathered materials are normally left in situ with the absence of large-scale denudation processes such as glaciations. This research tries to understand the behaviour of the weathered granites in Malaysia, from hard rock to the final products, the clay minerals. Grade 1 or fresh granites were sampled from different locations in Malaysia and analysed. The residual soil above the fresh granites, which were formed from the weathering activities were also analysed. The types of clay minerals and clay-sized particle grains found from two study locations were compared. The bases of the comparisons were index properties, strength properties and the mineralogical properties. The parent rocks were also analysed to obtain the origin of the minerals formed at the later stages of weathering. It was found that the strength of the soil mass formed from the weathering processes generally depend on the clay-sized particle grains rather than the types of clay minerals. It should however be noted that only halloysites and smectites clay minerals were observed in the samples obtained from the two study locations.

3D visualizing of volumetric surface movement at karstic limestone area

Limestone bedrock topography has complex phenomena and highly relief subsurface topography due to the presence of karstic features. Geotechnical and environmental problems arise whenever foundations are established on the surface of the limestone bedrock or within the overburden soils. Geographical information system (GIS) and remote sensing are emerging as powerful techniques widely applicable in natural resources management to detect land use changes and devise strategies based on these changes. The study focuses on using aerial photography for the detection of changes and effects of mining on geomorphology, especially the use of sequential images that allows to detect changes taken place from time to time, by using. Volumetric Surface Movement Spatiotemporal Data Model (VSMSDM) application has been employed to create karst terrain surface movements and visualized 3D information in the Virtual Geographical Information Systems (VGIS). VSMSDM application was implemented by developing prototype of visualization system using with integrated time in the TIN structure. The data have been collected from aerial photography in 1981 and 2004, and the results displayed that the proposed data model is able to view the changing in karst topography to detect significant landscapes and landforms changes.

Risk management overview of tunnels using numerical modeling

Purpose – The purpose of this paper is to introduce the numerical methods in tunnel engineering and their capabilities to indicate the fracture and failure in all kinds of tunneling methods such as New Austrian Tunneling Method, tunnel boring machine and cut‐cover. An essential definition of numerical modeling of tunnels to determine the interaction between geo‐material (soil and rock) surrounding the tunnel structure is discussed.Design/methodology/approach – Tunnel geo‐material (soil and rock) interaction requires advanced constitutive models for the numerical simulation of linear, nonlinear, time‐dependent, anisotropic, isotropic, homogenous and nonhomogeneous behaviors. The numerical models discussed in this paper are developed in finite element method (FEM), finite deference method (FDM), boundary element method and discrete element method and these tools are used to illustrate the behavior of tunnel structure deformation under different loads and in complicated conditions. The disadvantage of this m...

Overview of remote sensing techniques in earthquake prediction

Purpose – The matter of predicting disasters has always been one of the hottest and most challenging tasks in geology. Earthquakes are among the most destructive ones among all the natural hazards. Occurring often without any warning, they are the most feared and unpredictable natural phenomena. In recent years with the emergence of new remote sensing instruments and techniques, geologists interested themselves to define accurate and reliable procedures to foresee disasters using this new technology. This paper aims to examine some of the data that have been used so far in earthquake prediction as well as cheap, relevant remotely sensing and geographic information systems methods to acquire and manipulate data.Design/methodology/approach – Earthquakes are not the same in terms of origins, places (depth) and effects. So after having a brief look at the earthquakes, this paper examines the data that can be used for predicting earthquakes and reviews some of the remote sensing methods used to predict tectoni...