Shattri Mansor

Landslide hazard and risk analyses at a landslide prone catchment area using statistical based geospatial model

This paper presents the application of remote sensing techniques, digital image analysis and Geographic Information System tools to delineate the degree of landslide hazard and risk areas in the Balik Pulau area in Penang Island, Malaysia. Its causes were analysed through various thematic attribute data layers for the study area. Firstly, landslide locations were identified in the study area from the interpretation of aerial photographs, satellite imageries, field surveys, reports and previous landslide inventories. Topographic, geologic, soil and satellite images were collected and processed using Geographic Information System and image processing tools. There are 12 landslide-inducing parameters considered for the landslide hazard analyses. These parameters are: topographic slope, topographic aspect, plan curvature, distance to drainage and distance to roads, all derived from the topographic database; geology and distance to faults, derived from the geological database; landuse/landcover, derived from Landsat satellite images; soil, derived from the soil database; precipitation amount, derived from the rainfall database; and the vegetation index value, derived from SPOT satellite images. In addition, hazard analyses were performed using landslide-occurrence factors with the aid of a statistically based frequency ratio model. Further, landslide risk analysis was carried out using hazard map and socio-economic factors using a geospatial model. This landslide risk map could be used to estimate the risk to population, property and existing infrastructure like transportation networks. Finally, to check the accuracy of the success-rate prediction, the hazard map was validated using the area under curve method. The prediction accuracy of the hazard map was 89%. Based on these results the authors conclude that frequency ratio models can be used to mitigate hazards related to landslides and can aid in land-use planning.

Utilization of optical remote sensing data and geographic information system tools for regional landslide hazard analysis by using binomial logistic regression model

This paper deals with landslide hazard analysis using Geographic Information System (GIS) and remote sensing data for Cameron Highland, Malaysia. Landslide locations were identified in the study area from interpretation of aerial photographs and field surveys. Topographical/geological data and satellite images were collected and processed using GIS and image processing tools. There are ten landslide inducing parameters which are considered for the landslide hazards. These parameters are topographic slope, aspect, curvature and distance from drainage, all derived from the topographic database; geology and distance from lineament, derived from the geologic database; landuse from Landsat satellite images; soil from the soil database; precipitation amount, derived from the rainfall database; and the vegetation index value from SPOT satellite images. Landslide hazard was analyzed using landslide-occurrence factors employing the logistic regression model. The results of the analysis were verified using the landslide location data and compared with logistic regression model. The accuracy of hazard map observed was 85.73%. The qualitative landslide hazard analysis was carried out using the logistic regression model by doing map overlay analysis in GIS environment. This information could be used to estimate the risk to population, property and existing infrastructure like transportation network.

GIS-based modeling for the spatial measurement and evaluation of mixed land use development for a compact city

Compact cities are recognized as sustainable urban forms rather than sprawl developments. Such cities are characterized by high density, land use diversity, accessibility, and efficient public transportation. However, few studies investigate how and how much these parameters affect and relate to compact cities. For instance, although mixed land use is the main key planning principle of compact development, no standard method exists for quantifying, measuring, and evaluating this parameter. This study performs a compact development analysis of Kajang City (Malaysia) with emphasis on evaluating and discussing the importance of mixed land use development. First, the land use diversity of Kajang City was measured. Second, the probability map of mixed land use developments was predicted using a weights-of-evidence (WoE) model. Finally, the importance of mixed land use for compact cities was evaluated using multicriteria decision analysis (MCDA). The created mixed land use probability map was validated using the receiver operating characteristic (ROC) technique. In addition, the 75% similarity between mixed land use and compact development suitability maps highlighted the importance of mixed land use development for compact cities. Results can be used as preliminary guidelines for local governments and planners regarding compact development and management to achieve sustainable urban forms.

Interoperability among Heterogeneous Systems in Smart Home Environment

The smart home environment is highly characterized by heterogeneity with many systems that need to interoperate and perform their tasks efficiently. With rapid growth of services, applications and devices in smart home environment, the interoperability factor seems still elusive. This is due to the nature of smart home as distributed architecture that needs certain degree of interoperability and interoperation for managing heterogeneous systems comprising of different platforms. These heterogeneous systems are developed in isolation and consist of different operating systems, different programming platform and different tier of services. There is need for a mechanism that could make the heterogeneous systems `talk¿ each other and interoperate in an efficient manner regardless of operating platform. Web services seems to be state-of-the art technology that could be one potential solution in providing greater interoperability. In this paper we describe interoperability issues that need to be considered and we present a solution based on Simple Object Access Protocol (SOAP) technology to solve the interoperability problem in smart home environment.

Hyperspectral discrimination of tree species with different classifications using single- and multiple-endmember

Discrimination of tree species with different ages is performed in three classifications using hyperspectral data. The first classification is between Broadleaves and pines; the second classification is between Broadleaves, Corsican Pines, and Scots Pines, and the third classification is between six tree species including different ages of Corsican and Scots Pines. These three classifications are performed by having single- and multiple-endmember and considering five different spectral measure techniques (SMTs) in combination with reflectance spectra (ReflS), first and second derivative spectra. The result shows that using single-endmember, derivative spectra are not useful for a more challenging classification. This is further emphasized in multiple-endmember classification, where all SMTs perform better in ReflS rather than derivative in all classifications. Furthermore, using derivative spectra, discrimination accuracy become more dependent on the type of SMTs, especially in single-endmember. By employing multiple-endmember, the within-species variation is significantly reduced, thereby, the remaining challenge in discriminating tree species with different ages is only due to the between-species similarity. Overall, discrimination accuracies around 92.4, 76.8, and 71.5% are obtained using original reflectance and multiple-endmember for the first, second, and third classification, which is around 14.3, 17, and 8.3% higher than what were obtained in single-endmember classifications, respectively. Also, amongst the five SMTs, Euclidean distance (in both single- and multiple-endmember) and Jeffreys–Matusita distance (in single-endmember and derivative spectra) provided the highest discrimination accuracies in different classifications. Furthermore, when discrimination become more challenging from the first to second and third classification, the performance difference between different SMTs is increased from 1.4 to 3.8 and 7.3%, respectively. The study shows high potential of multiple-endmember to be employed in remote sensing applications in the future for improving tree species discrimination accuracy.

GIS‐grid‐based and multi‐criteria analysis for identifying and mapping peat swamp forest fire hazard in Pahang, Malaysia

Peat swamp forest fire hazard areas were identified and mapped by integrating GIS‐grid‐based and multi‐criteria analysis to provide valuable information about the areas most likely to be affected by fire in the Pekan District, south of Pahang, Malaysia. A spatially weighted index model was implemented to develop the fire hazard assessment model used in this study. Fire‐causing factors such as land use, road network, slope, aspect and elevation data were used in this application. A two‐mosaic Landsat TM scene was used to extract land use parameters of the study area. A triangle irregular network was generated from the digitized topographic map to produce a slope risk map, an aspect risk map and an elevation risk map. Spatial analysis was applied to reclassify and overlay all grid hazard maps to produce a final peat swamp forest fire hazard map. To validate the model, the actual fire occurrence map was compared with the fire hazard zone area derived from the model. The model can be used only for specific areas, and other criteria should be considered if the model is used for other areas. The results show that most of the actual fire spots are located in very high and high fire risk zones identified by the model.

Spatial technology for natural risk management

This study integrates high spatial resolution remote sensor data with geographic information system (GIS) data and multi‐criteria analysis to develop a methodology to model disaster risk for flood risk management and in peat swamp forest fires in order to assist in providing decision support systems for emergency operations and disaster prevention. Landslides are the result of a wide variety of processes, including geological, geomorphological and meteorological factors. Spatial technology has the ability to assess and estimate regions of landslide hazard by creating thematic maps and overlapping them to produce a final hazard map which classifies regions according to three categories of risk.

Improving detailed rule-based feature extraction of urban areas from WorldView-2 image and lidar data

Urbanization is commonly accepted as an important contributor to the growth of man-made structures and as a rapid convertor of natural environments to impervious surfaces. Roofs are one class of impervious surface whose materials can highly influence the quality of urban surface water. In this study, two data sources, WorldView-2 (WV-2) imagery and a combination of WV-2 and lidar data, were utilized to map intra-urban targets, with 13 classes. Images were classified using object-based image analysis. Pixel-based classifications using the support vector machine (SVM) and maximum likelihood (ML) methods were also tested for their abilities to use both lidar data and WV-2 imagery. ML and SVM classifications yielded overall accuracies of 72.46% and 75.69%, respectively. The results of these classifiers exhibited mixed pixels and salt-and-pepper effects. Spectral, spatial, and textural attributes as well as various spectral indices were employed in the object-based classification of WV-2 imagery. Feature classification of WV-2 imagery resulted in 85% overall accuracy. Lidar data were added to WV-2 imagery to assist in the spatial and spectral diversities of urban infrastructures. Classified image made from WV-2 imagery and lidar data achieved 92.84% overall accuracy. Rule-sets of these fused datasets effectively reduced the spectral variation and spatial heterogeneities of intra-urban classes, causing finer boundaries among land-cover classes. Therefore, object-based classification of WV-2 imagery and lidar data efficiently improved detailed characterization of roof types and other urban surface materials.

A review of applying second-generation wavelets for noise removal from remote sensing data

The processing of remotely sensed data includes compression, noise reduction, classification, feature extraction, change detection and any improvement associated with the problems at hand. In the literature, wavelet methods have been widely used for analysing remote sensing images and signals. The second-generation of wavelets, which is designed based on a method called the lifting scheme, is almost a new version of wavelets, and its application in the remote sensing field is fresh. Although first-generation wavelets have been proven to offer effective techniques for processing remotely sensed data, second-generation wavelets are more efficient in some respects, as will be discussed later. The aim of this review paper is to examine all existing studies in the literature related to applying second-generation wavelets for denoising remote sensing data. However, to make a better understanding of the application of wavelet-based denoising methods for remote sensing data, some studies that apply first-generation wavelets are also presented. In the part of hyperspectral data, there is a focus on noise removal from vegetation spectrum.

Early detection of basal stem rot disease Ganoderma in oil palms based on hyperspectral reflectance data using pattern recognition algorithms

Basal stem rot (BSR) is a fatal fungal (Ganoderma) disease of oil palm plantations and has a significant impact on the production of palm oil in Malaysia. Because there is no effective treatment to control this disease, early detection of BSR is vital for sustainable disease management. The limitations of visual detection have led to an interest in the development of spectroscopically based detection techniques for rapid diagnosis of this disease. The aim of this work was to develop a procedure for early and accurate detection and differentiation of Ganoderma disease with different severities, based on spectral analysis and statistical models. Reflectance spectroscopy analysis ranging from the visible to near infrared region (325–1075 nm) was applied to analyse oil palm leaf samples of 47 healthy (G0), 55 slightly damaged (G1), 48 moderately damaged (G2), and 40 heavily damaged (G3) trees in order to detect and quantify Ganoderma disease at different levels of severity. Reflectance spectra were pre-processed, and principal component analysis (PCA) was performed on different pre-processed datasets including the raw dataset, first derivative, and second derivative datasets. The classification models: linear and quadratic discrimination analysis, k-nearest neighbour (kNN), and Naïve–Bayes were applied to PC scores for classifying four levels of stress in BSR-infected oil palm trees. The analysis showed that the kNN-based model predicted the disease with a high average overall classification accuracy of 97% with the second derivative dataset. Results confirmed the usefulness and efficiency of the spectrally based classification approach in rapid screening of BSR in oil palm.