Huseyin Ertas

An in vitro comparison of apically extruded debris and instrumentation times with ProTaper Universal, ProTaper Next, Twisted File Adaptive, and HyFlex instruments.

INTRODUCTION The purpose of this study was to compare the in vitro amount of apically extruded debris with new endodontic rotary nickel-titanium instruments. METHODS Sixty mandibular premolars were instrumented up to size 25 using ProTaper Universal (Dentsply Maillefer, Ballaigues, Switzerland), ProTaper Next (Dentsply Maillefer), Twisted File Adaptive (SybronEndo, Orange, CA), and HyFlex (Coltene-Whaledent, Allstetten, Switzerland) rotary systems. The apically extruded debris was collected and dried in preweighed Eppendorf tubes. The amount of extruded debris was assessed with an electronic balance. The total time required to complete root canal shaping with the different instruments was also recorded. The significance level was set at P = .05. RESULTS The instrumentation time with the ProTaper Universal rotary system was significantly longer than with all the other instruments (P < .05). The Twisted File Adaptive and ProTaper Next systems extruded significantly less debris than the ProTaper Universal and HyFlex systems (P < .05). CONCLUSIONS The ProTaper Next and Twisted File Adaptive instrumentation systems were associated with less debris extrusion compared with the ProTaper Universal and HyFlex systems.

Comparison of the Cyclic Fatigue Resistance of 5 Different Rotary Pathfinding Instruments Made of Conventional Nickel-Titanium Wire, M-wire, and Controlled Memory Wire

INTRODUCTION This study compared the cyclic fatigue resistance of current nickel-titanium rotary path-finding instruments. METHODS Five types of nickel-titanium rotary pathfinding instruments were used in steel canals with a 90° curvature and a curvature radius of 3 mm (n = 10) and 5 mm (n = 10). The cyclic fatigue of the following instruments was tested at 4 mm from the tip: PathFile (#16 and a .02 taper; Dentsply Maillefer, Ballaigues, Switzerland), G-File (#12 and a .03 taper; Micro-Mega, Besançon Cedex, France), Scout Race (#15 and a .02 taper; FKG Dentaire, La Chaux-de-Fonds, Switzerland), HyFlex GPF (#15 and a .02 taper; Coltene-Whaledent, Allstetten, Switzerland), and ProGlider (#16 with a mean taper of .04125 and a .02 at the first 4 mm from the tip, Dentsply Maillefer). The length of the fractured parts was measured, and the number of cycles to fracture (NCF) was calculated. The data were statistically analyzed using Kruskal-Wallis and Mann-Whitney tests (α = .05). After Bonferroni correction, the new P value was set as .005. RESULTS The difference in the cyclic fatigue of all the files at both curvatures was statistically significant (P values from .0035 to less than .0001). The ranking of the instruments from the highest to the lowest NCF was as follows: HyFlex GPF, G files, ProGlider, PathFile, and Scout Race. The length of the fractured part of the instruments was similar in all the groups (P > .05). All the tested instruments had a lower NCF at a curvature radius of 3 mm when compared with a curvature radius of 5 mm (P < .0001). CONCLUSIONS Within the limitations of this study, the cyclic fatigue resistance of the HyFlex GPF instrument was the highest, and the curvature radius had a significant effect on the fatigue resistance.

Comparison of cyclic fatigue resistance of novel nickel-titanium rotary instruments.

New files (ProTaper Next/HyFlex/OneShape) are made from novel nickel-titanium (NiTi) alloys/treatments. The purpose of this study was to compare the cyclic fatigue resistance of these new instruments with that of Revo-S instruments. Four groups of 20 NiTi endodontic instruments were tested in steel canals with a 3 mm radius and a 60° angle of curvature. The cyclic fatigue of the following NiTi instruments with a tip size 25 and 0.06 taper that were manufactured with different alloys was tested: ProTaper Next X2 (M-Wire), OneShape (conventional NiTi), Revo-S Shaping Universal (conventional NiTi) and HyFlex 25/0.6 (controlled memory NiTi wire). A one-way anova and post-hoc Tukeys test (α = 0.05) revealed that the HyFlex files had the highest fatigue resistance and the Revo-S had the least fatigue resistance among the groups (P < 0.001).

Effects of root canal preparation, various filling techniques and retreatment after filling on vertical root fracture and crack formation

AIM To investigate the incidence of cracks in root dentin after rotary instrumentation and filling with cold lateral condensation (CL), single-cone obturation (SC), and warm vertical compaction (WV) and retreatment of each filling system. METHODOLOGY One-hundred sixty mandibular incisors were selected. Twenty teeth were left unprepared and served as a control, and the remaining 140 teeth were instrumented. Twenty teeth were assigned to an only prepared group. The remaining 120 teeth were assigned to three root canal filling groups and three retreatment groups (n = 20), as follows: CL, WV, SC, and retreatment of each filling system. All the roots were sectioned perpendicular to the long axis at 2, 4, 6, and 8 mm from the apex, and the sections were then observed under a stereomicroscope. The absence/presence of cracks and vertical root fractures were recorded, and the data were analyzed with a Pearsons chi-square test (P = 0.05). RESULTS No complete vertical root fractures were observed in the unprepared and only prepared groups. However, vertical fractures were observed in the filling and retreatment groups. There were significantly more cracks in the retreatment after WV group than the other groups, with the exception of the retreatment after SC, WV, and CL resulted in significantly more cracks than the only prepared and SC. CONCLUSIONS The filling techniques (except SC) caused more cracks than preparation only. The SC caused fewer cracks compared to the other filling techniques. The retreatment following the different filling techniques (except CL) caused more cracks than the original fillings.

Comparison of Cyclic Fatigue Resistance of Nickel-Titanium Coronal Flaring Instruments

INTRODUCTION The purpose of this study was to compare the cyclic fatigue resistance of coronal flaring instruments. METHODS Three groups of nickel-titanium (NiTi) endodontic coronal flaring instruments were tested in steel canals with a 3-mm curvature radius and 60° (n = 18) and 45° of curvature (n = 18). The cyclic fatigue of the following NiTi instruments was tested: ProTaper Sx (Dentsply Maillefer, Ballaigues, Switzerland), HyFlex 25.08 (Coltene-Whaledent, Allstetten, Switzerland), and Revo-S SC1 (Micro-Mega, Besancon, France). The length and diameter of the fractured fragment and the total area of the fractured surface of each instrument were measured. The data were then statistically analyzed using a 1-way analysis of variance and the post hoc Tukey test (α = .05). RESULTS At the 60° of curvature, Revo-S had the highest fatigue resistance, HyFlex had the second highest fatigue resistance, and ProTaper Universal had the least fatigue resistance. At the 45° of curvature, the Revo-S and HyFlex showed superior cyclic fatigue resistance compared with the ProTaper. The length of the fracture fragment of the ProTaper instrument was longer than that of the other groups at the 60° of curvature. At the 45° of curvature, the length of the fracture fragment of the ProTaper and HyFlex instruments was longer than that of Revo-S. The mean diameter and surface area of the HyFlex instruments in the fractured part was higher than that of other groups at both angles of curvature. CONCLUSIONS The Revo-S SC1 and HyFlex 25.08 instruments showed better cyclic fatigue resistance than the ProTaper Sx instrument.

Efficacy of needle irrigation, EndoActivator, and photon-initiated photoacoustic streaming technique on removal of double and triple antibiotic pastes.

INTRODUCTION Photon-induced photoacoustic streaming (PIPS) is a novel technique used for the removal of material on root canal walls, such as bacteria and the smear layer. This study evaluated the efficacy of needle irrigation, the EndoActivator System (Dentsply Tulsa Dental Specialties, Tulsa, OK), and PIPS on the removal of antibiotic pastes from an artificial groove created in a root canal. METHODS Root canal preparation was performed up to size #40 on 84 extracted single-rooted teeth using ProTaper rotary instruments (Dentsply Maillefer, Ballaigues, Switzerland). The specimens were then split longitudinally, and 2 standardized grooves were prepared in the coronal and apical part of each segment. Double (DAP) and triple antibiotic pastes (TAP) were placed in the grooves for 4 weeks, and the root halves were reassembled. Needle irrigation, the EndoActivator System, and PIPS were used for the removal of DAP and TAP. The root segments were disassembled, and the amount of remaining antibiotic pastes was evaluated under a stereomicroscope at 20× magnification using a 4-grade scoring system. The data were evaluated statistically using Mann-Whitney U tests with a 95% confidence level (P = .05). RESULTS PIPS removed significantly more antibiotic pastes than the EndoActivator and needle irrigation (P < .001). The EndoActivator was superior to needle irrigation in removing antibiotic pastes (P < .001). There were no statistically significant differences between DAP and TAP and between coronal and apical thirds in their removing from artificially created grooves (P > .05). CONCLUSIONS PIPS was more effective in removing both DAP and TAP from artificial grooves in root canals than the EndoActivator System and needle irrigation. The EndoActivator was also more effective than needle irrigation. It is difficult to completely remove antibiotic pastes from root canals.

A retrospective comparative study of cone-beam computed tomography versus rendered panoramic images in identifying the presence, types, and characteristics of dens invaginatus in a Turkish population.

INTRODUCTION This study assessed the presence, characteristics, and type of dens invaginatus (DI) by using cone-beam computed tomography (CBCT) and panoramic images rendered from CBCT images. In addition, the findings of the imaging techniques were compared. METHODS We evaluated 300 CBCT images to determine the type of DI, the presence of an impacted tooth near the DI, and the presence of apical pathosis. The McNemar test was used to compare the prevalence of DI according to CBCT and panoramic images rendered from CBCT images. RESULTS The presence of DI was lower on panoramic images rendered from CBCT images (3% of the patients) compared with on CBCT images (10.7% of the patients) (P < .001). According to the CBCT images, the distribution of teeth with DI was as follows: maxillary lateral incisors (75%), maxillary central incisors (6.8%), mandibular premolars (4.6%), mesiodens (9%), maxillary canines (2.3%), and mandibular canines (2.3%). Type I DI was the most commonly observed type of invaginatus (65.9%), followed by type II (29.5%) and type III (4.6%). All patients with type III DI and 25% of the patients with type II DI had apical pathosis at the time of referral, but periapical lesions were not observed in teeth with type I DI. In total, 13.6% of DI cases had impacted teeth. CONCLUSIONS CBCT can be recommended as an effective diagnostic device for identifying DI because it provides an accurate representation of the external and internal dental anatomy.

Effectiveness of ProTaper Universal retreatment instruments used with rotary or reciprocating adaptive motion in the removal of root canal filling material

AIM To compare the effectiveness of ProTaper Universal retreatment instruments with continuous rotation and adaptive motion (AM; a modified reciprocating motion that combines rotational and reciprocating motion) in the removal of filling material. METHODOLOGY Mesiobuccal root canals in 36 mandibular first molars were instrumented up to size F2 with the ProTaper Universal instrument (Dentsply Maillefer, Ballaigues, Switzerland) and filled using sealer and ProTaper Universal F2 gutta-percha cones. Gutta-percha was then down-packed and the root canal backfilled using the extruder hand-piece of the Elements Obturation System (SybronEndo, Orange, CA, USA). The teeth were assigned to two groups (n = 18), and removal of the root fillings was performed using one of the following techniques: group 1) ProTaper Universal retreatment files used with rotational motion (RM) and group 2) ProTaper Universal retreatment files used with adaptive motion (AM) (600° clockwise/0° counter-clockwise to 370° clockwise/50° counter-clockwise). The teeth were sectioned, and both halves were analysed at 8 × magnification. The percentage of remaining filling material was recorded. The data were analysed statistically using the Students t-test at a 95% confidence level (P < 0.05). RESULTS There was no significant difference between the groups with respect to the total time required for retreatment (P = 0.481). The AM technique left significantly less filling material than the RM method (P = 0.013). CONCLUSION The use of ProTaper Universal retreatment files with adaptive motion removed more filling materials from root canals than the rotational movement.

Radiographic Assessment of the Technical Quality and Periapical Health of Root-Filled Teeth Performed by General Practitioners in a Turkish Subpopulation

Aim. The aim of this study was to evaluate by means of radiographs the technical quality of root fillings performed by dental practitioners. Methods and Material. Standardized periapical radiographs were made on 484 patients who received endodontic treatment in private practice. A total of 831 endodontically treated teeth with 1448 roots were evaluated for technical quality of the root canal filling and the periapical status of the teeth. Also, the apical status of each root-filled tooth was assessed according to the length, density, and taper of root fillings, and the presence of apical transportation, broken root instruments, and overfilled sealer or gutta-percha material was recorded for each root canal. Results. Of the endodontically treated teeth 26.6% had healthy periapical tissues, while technically good endodontic treatment constituted 12.8%. Based on the treatment success, there was no significant difference between the tooth groups. Statistical analysis of the data did not demonstrate statistically significant differences between the various parameters that were evaluated (P < 0.05). Conclusions. Technical quality of root fillings in a population who received treatment in private practice was poor and was consistent with a low prevalence of apical health. The probable reasons for this failure are multifactorial and may be improved if the operators improve their skills with continuing postgraduate education programs.

In Vitro Fracture Resistance of Endodontically Treated Roots Filled with a Bonded Filling Material or Different Types of Posts

AIM This study aimed to compare the fracture resistance of roots filled with a bonded material, fiber posts, or titanium post systems. METHODS Canals in the first group were filled with AH Plus and gutta-percha cones, and roots in the second group were filled with Epiphany sealer and Resilon cones. The root fillings (60 roots) were removed up to 4 mm from the canal apex to obtain 10-mm-deep post spaces, and posts were cemented. The groups were as follows: AH Plus control group, Epiphany control group, AH Plus fiber post group, AH Plus titanium post group, Epiphany fiber post group, and Epiphany titanium post group. Fracture tests were performed by using an Instron testing machine. The force was applied at a 45° axial angle with a constant speed of 1 mm/min. For each sample, the force at which fracture occurred was recorded in units of newtons. Statistical analysis was carried out by using analysis of variance test. RESULTS There was no statistically significant difference between all groups (P > .05). CONCLUSIONS Titanium posts, fiber posts, and Epiphany root canal filling systems were found to have no reinforcing effect on endodontically treated roots.