Hyun Jeong Lee

Differences in the volatile compositions of ginseng species (Panax sp.).

The volatile compositions in dried white ginseng according to species (Panax ginseng, Panax notoginseng, and Panax quinquefolius) were analyzed and compared by applying multivariate statistical techniques to gas chromatography-mass spectrometry data sets. Main volatile compounds of ginseng species in the present study were sesquiterpenes, such as bicyclogermacrene, (E)-β-farnesene, β-panasinsene, calarene, α-humulene, β-elemene, etc. In particular, α-selinene, α-terpinolene, β-bisabolene, β-phellandrene, β-sesquiphellandrene, zingiberene, germacrene D, limonene, α-gurjunene, (E)-caryophyllene, δ-cadinene, (E)-β-farnesene, α-humulene, bicyclogermacrene, longiborn-8-ene, β-neoclovene, and (+)-spathulenol were mainly associated with the difference between P. ginseng and P. notoginseng versus P. quinquefolius species. On the other hand, the discrimination between P. ginseng and P. notoginseng could be constructed by hexanal, 2-pyrrolidinone, (E)-2-heptenal, (E)-2-octenal, heptanal, isospathulenol, (E,E)-2,4-decadienal, 3-octen-2-one, benzaldehyde, 2-pentylfuran, and (E)-2-nonenal.

Hierarchically porous aminosilica monolith as a CO2 adsorbent.

A facile strategy is successfully developed for the centimeter-scale preparation of hierarchically porous aminosilica monolith as a CO2 adsorbent just by simple processes of solvent-evaporation-induced coating, self-assembly, and concentration of tetraethyl orthosilicate sol on the surface of a polymer foam template without any adhesive composite material or hydrothermal treatment. (3-Aminopropyl) trimethoxysilane is immobilized on the surface of silica monolith via a gas-phase procedure. The silica frameworks of the monolith mimic those of the polymer foam template at the macroscale, and the frameworks are composed of the SBA-15 structure at the nanoscale. The hierarchically porous structure demonstrates improved properties over the single-mode porous component, with the macroporous framework ensuring mechanical stability and good mass transport properties, while the smaller pores provide the functionality for CO2 adsorption.

Positive and Negative Electrorheological Response of Alginate Salts Dispersed Suspensions under Electric Field

Electrorheological (ER) effects of alginic acid and alginate salts (Na(+) alginate, NH(4)(+) alginate, and Ca(2+) alginate) dispersed suspensions were investigated under DC electric fields. A noteworthy result is that the Ca(2+) alginate dispersed suspension showed negative electrorheological effects under electric fields while the other suspensions exhibited positive electrorheological effects. It is the first time that the negative ER effect is obtained with the biomacromolecule. Interestingly, at the DC electric fields, the electromigration of particles to two electrodes was observed in the negative ER fluid, while the particles-bridges formed between two electrodes in the case of the positive ER fluid. In conclusion, the specific salt type of biomacromolecules could be suitable ER particles for negative ER suspension. We believe that our study can present a new way for the development of the biocompatible and eco-friendly negative ER fluids.

Dipolar-molecule complexed chitosan carboxylate, phosphate, and sulphate dispersed electrorheological suspensions

Herein, the electrorheological (ER) properties of highly dispersion-stable, biocompatible and biodegradable chitosan derivative dispersed ER suspensions are explored. Electro-mechanical responses of the ER suspensions are enhanced with fixed spacers (amide and ester groups) and various functional groups (acid series and their complex forms with urea). A noteworthy result is that the shear stress of urea complexed chitosan acid dispersed suspensions was higher than before doping the urea molecule. However, urea complexed chitosan phosphate and sulphate showed a decreased tendency of shear stress due to too high conductivity at the high temperature. In the dispersion stability test, the chitosan dispersed suspensions showed high dispersion stability for long times. The study of the influence of dipolar molecules on the ER properties of the chitosan derivative dispersed suspensions under an electric field shows how to enhance the ER responses easily just by doping molecules.

Design of a novel theranostic nanomedicine: synthesis and physicochemical properties of a biocompatible polyphosphazene–platinum(II) conjugate

To develop a theranostic nanomedicine involving the antitumor-active moiety (dach)Pt(II) (dach: trans-(±)-1,2-diaminocyclohexane) of oxaliplatin (OX), a new biocompatible polyphosphazene carrier polymer was designed by grafting with a methoxy poly(ethylene glycol) (MPEG) to increase duration of circulation in the blood and with aminoethanol (AE) as a spacer group. The antitumor (dach)Pt moiety was conjugated to the carrier polymer using cis-aconitic acid (AA) as a linker, resulting in a polymer conjugate formulated as [NP(MPEG550)(AE-AA)Pt(dach)]n, named “Polyplatin” (PP). PP was found to self-assemble into very stable polymeric nanoparticles with a mean diameter of 55.1 nm and a critical aggregation concentration of 18.5 mg/L in saline. PP could easily be labeled with a fluorescence dye such as Cy5.5 for imaging studies. The time-dependent ex vivo image studies on organ distributions and clearance of Cy-labeled PP have shown that PP accumulated in the tumor with high selectivity by the enhanced permeability and retention effect but was cleared out from all the major organs including the liver in about 4 weeks postinjection. Another time-dependent bioimaging study on distribution and clearance of PP in mouse kidney using laser ablation inductively coupled plasma mass spectroscopy has shown that PP accumulates much less in kidney and is more rapidly excreted than monomeric OX, which is in accord with the very low acute toxicity of PP as shown by its high LD50 value of more than 2000 mg/kg. The pharmacokinetic study of PP has shown that it has a much longer half-life (t1/2β) of 13.3 hours compared with the 5.21 hours of OX and about a 20 times higher area under the curve value of 42,850.8 ng h/mL compared with the 2,320.4 ng h/mL of OX. The nude mouse xenograft trials of PP against the gastric MKN-28 tumor cell line exhibited remarkably better tumor efficacy compared with OX at the higher tolerated dose, with lower systemic toxicity.

The compositions of volatiles and aroma-active compounds in dried omija fruits (Schisandra chinensis Baillon) according to the cultivation areas.

Differences in the compositions of volatiles from dried omija fruits (Schisandra chinensis Baillon) cultivated in different areas (Mungyeong, Jangsu, Jechon, and Hoengseong) in South Korea were determined by applying principal component analysis to gas chromatography-mass spectrometry data sets. Quantitative assessments revealed that terpene hydrocarbons, such as germacrene D, β-selinene, α-ylangene, β-elemene, α-selinene, and (E)-β-farnesene, were the main volatiles in all omija fruit samples. On the other hand, (E)-β-ocimene, calarene, (E)-β-farnesene, β-selinene, nonanal, 2-methylbutanoic acid, benzoic acid, 2,3-butanediol, and phenethyl alcohol were the major volatile components that contributed to the discrimination between omija fruit samples from the four cultivation areas. In addition, aroma-active compounds in four dried omija fruits were investigated and compared by gas chromatography-olfactometry using aroma extract dilution analysis. (E)-β-Ocimene (floral and herbaceous), α-pinene (pine-like and woody), hexanal (cut grass-like), 5-methylfurfural (burnt sugar-like and sweet), and α-terpinene (minty, green, and fresh) were important aroma-active compounds in all omija samples. Interestingly, the flavor dilution factors of most aroma-active compounds were lower for omija sample cultivated in Hoengseong than for those cultivated in Mungyeong, Jangsu, and Jechon.

Bio-solar cell factories for photosynthetic isoprenoids production

Main conclusionPhotosynthetic production of isoprenoids in cyanobacteria is considered in terms of metabolic engineering and biological importance.Metabolic engineering of photosynthetic bacteria (cyanobacteria) has been performed to construct bio-solar cell factories that convert carbon dioxide to various value-added chemicals. Isoprenoids, which are found in nature and range from essential cell components to defensive molecules, have great value in cosmetics, pharmaceutics, and biofuels. In this review, we summarize the recent engineering of cyanobacteria for photosynthetic isoprenoids production as well as carbon molar basis comparisons with heterotrophic isoprenoids production in engineered Escherichia coli.

Toward solar biodiesel production from CO2 using engineered cyanobacteria.

Metabolic engineering of cyanobacteria has received attention as a sustainable strategy to convert carbon dioxide to various biochemicals including fatty acid-derived biodiesel. Recently, Synechococcus elongatus PCC 7942, a model cyanobacterium, has been engineered to convert CO2 to fatty acid ethyl esters (FAEEs) as biodiesel. Modular pathway has been constructed for FAEE production. Several metabolic engineering strategies were discussed to improve the production levels of FAEEs, including host engineering by improving CO2 fixation rate and photosynthetic efficiency. In addition, protein engineering of key enzyme in S. elongatus PCC 7942 was implemented to address issues on FAEE secretions toward sustainable FAEE production from CO2. Finally, advanced metabolic engineering will promote developing biosolar cell factories to convert CO2 to feasible amount of FAEEs toward solar biodiesel.