Hyungki Shin

Development of the Supercritical Carbon Dioxide Power Cycle Experimental Loop in KIER

Three supercritical carbon dioxide (CO2) power cycle experimental loops have been developed in Korea Institute of Energy Research (KIER) from 2013. As the first step, a 10 kWe-class simple un-recuperated Brayton power cycle experimental loop was designed and manufactured to test its feasibility. A 12.6 kWe hermetic turbine-alternator-compressor (TAC) unit which is composed of a centrifugal compressor, a radial turbine and the gas foil bearings was manufactured. The turbine inlet design temperature and pressure were 180 °C and 130 bar, respectively. Preliminary operation was successful at 30,000 RPM which all states of the cycle existed in the supercritical region. Second, a multi-purpose 1 kW-class test loop which operates as a transcritical cycle at a temperature of 200 °C was developed to concentrate on the characteristics of the cycle, control and stability issues of the cycle. A high-speed turbo-generator was developed which is composed of a radial turbine with a partial admission nozzle and the commercial oil-lubricated angular contact ball bearings. Finally, a 60 kWe-class Brayton cycle is being developed which is composed of two turbines and one compressor to utilize flue-gas waste heat. As the first phase of development, a turbo-generator which is composed of an axial turbine, a mechanical seal and the oil-lubricated tilting-pad bearings was designed and manufactured.Copyright

Numerical Analysis of Unsymmetric Flatbak Trailing Edge Airfoil to Reduce Turbomachinery Noise in Power Generation Cycle

A turbomachinery is essential part in the power generation cycle. But, it is main noise source to annoy workers and users and to make environmental problem. Thus it is important to reduce this noise for operating the power generation cycle. This noise is created by flow instability on rotor blade trailing edge. An airfoil that becomes a section of a rotor blade of a rotating machine is manufactured as a blunt trailing edge (TE) with a round or flatback shape rather than the ideal sharp TE shape for the purposes of producibility and durability. This increases the tonal noise and flow-induced vibration at low frequency owing to vortex shedding behind TE when compared with a sharp TE. In order to overcome this problem, this study investigates the oblique TE shape using numerical simulation. In order to do so, the flow was simulated using large eddy simulation (LES) and the noise was analysed by acoustic analogy coupled with LES result. Once the simulation results were verified using the flatback airfoil measurements of Sandia National Laboratories, numerical prediction was performed for airfoils modified to have oblique trailing edge angles of 60°, 45°, and 30° to analyse the flow and noise characteristics. From the simulation results for an airfoil having an oblique TE, it could be seen that the vortex shedding frequency moves in accordance with the oblique angle and that the vortex shedding noise characteristics change according to this angle when compared to the flatback TE airfoil. Therefore, it is considered that modifying the flatback TE airfoil to have an appropriate oblique angle can reduce noise and change the tonal frequency to a bandwidth that is suitable for mechanical systems.

Development of a new free wake model using finite vortex element for a horizontal axis wind turbine

The treatment of rotor wake has been a critical issue in the field of the rotor aerodynamics. This paper presents a new free wake model for the unsteady analysis for a wind turbine. A blade-wake-tower interaction is major source of unsteady aerodynamic loading and noise on the wind turbine. However, this interaction can not be considered in conventional free wake model. Thus, the free wake model named Finite Vortex Element (FVE hereafter) was devised in order to consider the interaction effects. In this new free wake model, the wake-tower interaction was described by dividing one vortex filament into two vortex filaments, when the vortex filament collided with a tower. Each divided vortex filaments were remodeled to make vortex ring and horseshoe vortex to satisfy Kelvin’s circulation theorem and Helmholtz’s vortex theorem. This model was then used to predict aerodynamic load and wake geometry for the horizontal axis wind turbine. The results of the FVE model were compared with those of the conventional free wake model and the experimental results of SNU wind tunnel test and NREL wind tunnel test under various inflow velocity and yaw condition. The result of the FVE model showed better correlation with experimental data. It was certain that the tower interaction has a strong effect on the unsteady aerodynamic load of blades. Thus, the tower interaction needs to be taken into account for the unsteady load prediction. As a result, this research shows a potential of the FVE for an efficient and versatile numerical tool for unsteady loading analysis of a wind turbine.