Hyungsoon Im

Label-free detection and molecular profiling of exosomes with a nano-plasmonic sensor

Exosomes show potential for cancer diagnostics because they transport molecular contents of the cells from which they originate. Detection and molecular profiling of exosomes is technically challenging and often requires extensive sample purification and labeling. Here we describe a label-free, high-throughput approach for quantitative analysis of exosomes. Our nano-plasmonic exosome (nPLEX) assay is based on transmission surface plasmon resonance through periodic nanohole arrays. Each array is functionalized with antibodies to enable profiling of exosome surface proteins and proteins present in exosome lysates. We show that this approach offers improved sensitivity over previous methods, enables portable operation when integrated with miniaturized optics and allows retrieval of exosomes for further study. Using nPLEX to analyze ascites samples from ovarian cancer patients, we find that exosomes derived from ovarian cancer cells can be identified by their expression of CD24 and EpCAM, suggesting the potential of exosomes for diagnostics.

Recent progress in SERS biosensing

This perspective gives an overview of recent developments in surface-enhanced Raman scattering (SERS) for biosensing. We focus this review on SERS papers published in the last 10 years and to specific applications of detecting biological analytes. Both intrinsic and extrinsic SERS biosensing schemes have been employed to detect and identify small molecules, nucleic acids, lipids, peptides, and proteins, as well as for in vivo and cellular sensing. Current SERS substrate technologies along with a series of advancements in surface chemistry, sample preparation, intrinsic/extrinsic signal transduction schemes, and tip-enhanced Raman spectroscopy are discussed. The progress covered herein shows great promise for widespread adoption of SERS biosensing.

Vertically Oriented Sub-10-nm Plasmonic Nanogap Arrays

Nanometric gaps in noble metals can harness surface plasmons, collective excitations of the conduction electrons, for extreme subwavelength localization of electromagnetic energy. Positioning molecules within such metallic nanogaps dramatically enhances light-matter interactions, increasing absorption, emission, and, most notably, surface-enhanced Raman scattering (SERS). However, the lack of reproducible high-throughput fabrication techniques with nanometric control over the gap size has limited practical applications. Here we show sub-10-nm metallic nanogap arrays with precise control of the gaps size, position, shape, and orientation. The vertically oriented plasmonic nanogaps are formed between two metal structures by a sacrificial layer of ultrathin alumina grown using atomic layer deposition. We show increasing local SERS enhancements of up to 10(9) as the nanogap size decreases to 5 nm. Because these sub-10-nm gaps can be fabricated at high densities using conventional optical lithography over an entire wafer, these results will have significant implications for spectroscopy and nanophotonics.

Periodic nanohole arrays with shape-enhanced plasmon resonance as real-time biosensors

The authors report a combination of the enhanced transmission effect and shape resonances in a periodic array of nanoscale double-hole structures in a gold film to enhance the detection sensitivity of surface plasmon biosensors. Finite-difference time-domain calculations are used to quantify field enhancement at the apexes of the double-hole structure. The double-hole array was used to measure the formation of a self-assembled monolayer and for real-time sensing of protein adsorption onto a gold surface. This result demonstrates the potential to integrate propagating surface plasmons and localized shape resonances to improve real-time biosensors.

A magneto-DNA nanoparticle system for rapid detection and phenotyping of bacteria

So far, although various diagnostic approaches for pathogen detection have been proposed, most are too expensive, lengthy or limited in specificity for clinical use. Nanoparticle systems with unique material properties, however, circumvent these problems and offer improved accuracy over current methods. Here, we present novel magneto-DNA probes capable of rapid and specific profiling of pathogens directly in clinical samples. A nanoparticle hybridization assay, involving ubiquitous and specific probes that target bacterial 16S rRNAs, was designed to detect amplified target DNAs using a miniaturized NMR device. Ultimately, the magneto-DNA platform will allow both universal and specific detection of various clinically relevant bacterial species, with sensitivity down to single bacteria. Furthermore, the assay is robust and rapid, simultaneously diagnosing a panel of 13 bacterial species in clinical specimens within 2 h. The generic platform described could be used to rapidly identify and phenotype pathogens for a variety of applications.

A dielectric-modulated field-effect transistor for biosensing

Interest in biosensors based on field-effect transistors (FETs), where an electrically operated gate controls the flow of charge through a semiconducting channel, is driven by the prospect of integrating biodetection capabilities into existing semiconductor technology. In a number of proposed FET biosensors, surface interactions with biomolecules in solution affect the operation of the gate or the channel. However, these devices often have limited sensitivity. We show here that a FET biosensor with a vertical gap is sensitive to the specific binding of streptavidin to biotin. The binding of the streptavidin changes the dielectric constant (and capacitance) of the gate, resulting in a large shift in the threshold voltage for operating the FET. The vertical gap is fabricated using simple thin-film deposition and wet-etching techniques. This may be an advantage over planar nanogap FETs, which require lithographic processing. We believe that the dielectric-modulated FET (DMFET) provides a useful approach towards biomolecular detection that could be extended to a number of other systems.

Template-stripped smooth Ag nanohole arrays with silica shells for surface plasmon resonance biosensing.

Inexpensive, reproducible, and high-throughput fabrication of nanometric apertures in metallic films can benefit many applications in plasmonics, sensing, spectroscopy, lithography, and imaging. Here we use template-stripping to pattern periodic nanohole arrays in optically thick, smooth Ag films with a silicon template made via nanoimprint lithography. Ag is a low-cost material with good optical properties, but it suffers from poor chemical stability and biocompatibility. However, a thin silica shell encapsulating our template-stripped Ag nanoholes facilitates biosensing applications by protecting the Ag from oxidation as well as providing a robust surface that can be readily modified with a variety of biomolecules using well-established silane chemistry. The thickness of the conformal silica shell can be precisely tuned by atomic layer deposition, and a 15 nm thick silica shell can effectively prevent fluorophore quenching. The Ag nanohole arrays with silica shells can also be bonded to polydimethylsiloxane (PDMS) microfluidic channels for fluorescence imaging, formation of supported lipid bilayers, and real-time, label-free SPR sensing. Additionally, the smooth surfaces of the template-stripped Ag films enhance refractive index sensitivity compared with as-deposited, rough Ag films. Because nearly centimeter-sized nanohole arrays can be produced inexpensively without using any additional lithography, etching, or lift-off, this method can facilitate widespread applications of metallic nanohole arrays for plasmonics and biosensing.

CoSe2 and NiSe2 Nanocrystals as Superior Bifunctional Catalysts for Electrochemical and Photoelectrochemical Water Splitting

Catalysts for oxygen evolution reactions (OER) and hydrogen evolution reactions (HER) are central to key renewable energy technologies, including fuel cells and water splitting. Despite tremendous effort, the development of low-cost electrode catalysts with high activity remains a great challenge. In this study, we report the synthesis of CoSe2 and NiSe2 nanocrystals (NCs) as excellent bifunctional catalysts for simultaneous generation of H2 and O2 in water-splitting reactions. NiSe2 NCs exhibit superior electrocatalytic efficiency in OER, with a Tafel slope (b) of 38 mV dec(-1) (in 1 M KOH), and HER, with b = 44 mV dec(-1) (in 0.5 M H2SO4). In comparison, CoSe2 NCs are less efficient for OER (b = 50 mV dec(-1)), but more efficient for HER (b = 40 mV dec(-1)). It was found that CoSe2 NCs contained more metallic metal ions than NiSe2, which could be responsible for their improved performance in HER. Robust evidence for surface oxidation suggests that the surface oxide layers are the actual active sites for OER, and that CoSe2 (or NiSe2) under the surface act as good conductive layers. The higher catalytic activity of NiSe2 is attributed to their oxide layers being more active than those of CoSe2. Furthermore, we fabricated a Si-based photoanode by depositing NiSe2 NCs onto an n-type Si nanowire array, which showed efficient photoelectrochemical water oxidation with a low onset potential (0.7 V versus reversible hydrogen electrode) and high durability. The remarkable catalytic activity, low cost, and scalability of NiSe2 make it a promising candidate for practical water-splitting solar cells.

Atomic layer lithography of wafer-scale nanogap arrays for extreme confinement of electromagnetic waves

Squeezing light through nanometre-wide gaps in metals can lead to extreme field enhancements, nonlocal electromagnetic effects and light-induced electron tunnelling. This intriguing regime, however, has not been readily accessible to experimentalists because of the lack of reliable technology to fabricate uniform nanogaps with atomic-scale resolution and high throughput. Here we introduce a new patterning technology based on atomic layer deposition and simple adhesive-tape-based planarization. Using this method, we create vertically oriented gaps in opaque metal films along the entire contour of a millimetre-sized pattern, with gap widths as narrow as 9.9 Å, and pack 150,000 such devices on a 4-inch wafer. Electromagnetic waves pass exclusively through the nanogaps, enabling background-free transmission measurements. We observe resonant transmission of near-infrared waves through 1.1-nm-wide gaps (λ/1,295) and measure an effective refractive index of 17.8. We also observe resonant transmission of millimetre waves through 1.1-nm-wide gaps (λ/4,000,000) and infer an unprecedented field enhancement factor of 25,000.

Self‐Assembled Plasmonic Nanoring Cavity Arrays for SERS and LSPR Biosensing

Self-assembled plasmonic nanoring cavity arrays are formed alongside the curvature of highly packed metallic nanosphere gratings. The sub-10-nm gap size is precisely tuned via atomic layer deposition and highly ordered arrays are produced over a cm-sized area. The resulting hybrid nanostructure boosts coupling efficiency of light into plasmons, and shows an improved SERS detection limit. These substrates are used for SERS detection of the biological analyte, adenine, followed by concurrent localized surface plasmon resonance sensing.