I. Shrestha

Radiation properties and implosion dynamics of planar and cylindrical wire arrays, asymmetric and symmetric, uniform and combined X-pinches on the UNR 1-MA zebra generator

In the following experiments, we studied implosions of different wire arrays and X-pinches produced on the 1-MA Zebra generator at the University of Nevada, Reno. Diagnostics included both spatially-resolved and time-gated X-ray imaging and spectroscopy, and laser probing. In particular, we compared planar wire arrays, to which little energy could be coupled via the conventional magnetic-to-kinetic conversion mechanism, to cylindrical wire arrays of comparable dimensions and mass. The planar wire arrays were shown to radiate much higher peak power and more energy in subkiloelectronvolt and kiloelectronvolt spectral ranges than cylindrical wire arrays. We tested the theoretical conjecture that enhanced resistivity due to the small-scale inhomogeneity of wire-array plasmas has a major effect on dynamics, energy coupling and radiation performance of wire-array Z-pinches. The study of Al, Alumel, and W cylindrical wire arrays shows a wide variety of characteristic behaviors in plasma implosions discussed hereinafter. Additional experimental results for symmetric and asymmetric, uniform stainless steel, Cu, Mo, combined Al/Mo, Mo/Al, Al/W, W/Al, and Mo/W X-pinches are also presented. New data for the total radiation yield are obtained. The planar structures of X-pinch plasma and the corresponding electron beam was observed for most of X-pinches. The generation of hot spots along original wires positions-cooler than those from the cross-wire region-and arc structures with hot spots between wires were found for X-pinches composed from Al, Cu, and W wires.

Planar Wire Array as Powerful Radiation Source

The radiative performance of Al, Ni, and W planar wire arrays, to which little energy could be coupled via the conventional magnetic-to-kinetic conversion mechanism, is investigated. However, the planar wire arrays were shown to radiate much more energy in a short intense peak than possible due to dissipation of the kinetic energy. The planar array gives the unique possibility of seeing the evolution of the small-scale inhomogeneity of wire-array plasmas during wire ablation and implosion phases and highlights the importance of the Hall plasma phenomena and their impact on the dynamics, energy coupling, and radiation performance of wire-array Z-pinches

Double planar wire array as a compact plasma radiation source

Magnetically compressed plasmas initiated by a double planar wire array (DPWA) are efficient radiation sources. The two rows in a DPWA implode independently and then merge together at stagnation producing soft x-ray yields and powers of up to 11.5kJ∕cm and more than 0.4TW∕cm, higher than other planar arrays or low wire-number cylindrical arrays on the 1MA Zebra generator. DPWA, where precursors form in two stages, produce a shaped radiation pulse and radiate more energy in the main burst than estimates of implosion kinetic energy. High radiation efficiency, compact size (as small as 3–5mm wide), and pulse shaping show that the DPWA is a potential candidate for ICF and radiation physics research.

Dynamics of conical wire array z-pinch implosions.

A modification of the wire array Z pinch, the conical wire array, has applications to the understanding of wire array implosions and potentially to pulse shaping relevant to inertial confinement fusion. Results are presented from imploding conical wire array experiments performed on university scale 1 MA generators—the MAGPIE generator (1 MA, 240 ns) at Imperial College London [I. H. Mitchell et al., Rev. Sci Instrum. 67, 1533 (1996)] and the Nevada Terawatt Facility’s Zebra generator (1 MA, 100 ns) at the University of Nevada, Reno [B. Bauer et al., in Dense Z-Pinches, edited by N. Pereira, J. Davis, and P. Pulsifer (AIP, New York, 1997), Vol. 409, p. 153]. This paper will discuss the implosion dynamics of conical wire arrays. Data indicate that mass ablation from the wires in this complex system can be reproduced with a rocket model with fixed ablation velocity. Modulations in the ablated plasma are present, the wavelength of which is invariant to a threefold variation in magnetic field strength. The ax...

Spectroscopy and implosion dynamics of low wire number nested arrays on the 1 MA COBRA generator

Low wire number nested array Z-pinch experiments have been carried out with wires made of aluminum, stainless steel (uniform), and combinations of these two materials (mixed) on the 1MA COBRA generator at Cornell University [J. D. Douglass, J. B. Greenly, D. A. Hammer et al., in Proceedings of the 15th IEEE International Pulsed Power Conference (IEEE, Piscataway, NJ, 2005)]. The outer array consisted of eight wires, whereas the inner array had four or eight wires. The 10μm Al wires were alloy 5056 and the 6.25μm stainless steel wires were alloy SS304. The diagnostic suite included fast-x-ray and extreme ultraviolet (EUV) detectors, a time-gated x-ray pinhole camera, x-ray spectrometers, and laser shadow imaging. The main focus was made on the spectroscopic study of plasma evolution after the main x-ray burst though the data from photoconducting detector (PCD) and EUV signals over the whole period of current, and in addition laser shadowgraphy images before the main x-ray burst were analyzed. Modeling of t...

Investigation of Magnetic Fields in 1-MA Wire Arrays and

A Faraday rotation diagnostic was applied for the investigation of magnetic fields in plasma of 1-MA wire arrays and X-pinches. Laser-probing diagnostics at the Zebra generator include a four-channel polarointerferometer and a four-frame shadowgraphy. The Faraday rotation diagnostic consists of shadow and Faraday channels, shearing air-wedge interferometer, and an additional schlieren channel. The implosion dynamics of the wire arrays were studied. A current in the plasma column of Al low-wire number arrays was found by the Faraday rotation diagnostic. Optical diagnostics showed a turbulent plasma and bubblelike objects in the plasma column of Al wire arrays. The Faraday rotation diagnostic demonstrated a complicated structure of magnetic fields in X-pinch plasma

X

Experiments with single-planar wire arrays (SPWA) and double PWAs (DPWAs) with brass 310 wires were carried out on the 1-MA Zebra generator at the University of Nevada, Reno. Brass 310 (70% Cu and 30% Zn) PWAs have either 10 or 16 wires with diameters of 10.9 or 7.62 ¿m, respectively. The diagnostic suite included a bolometer, fast X-ray detectors, an axially resolved time-integrated spectrometer, a time-gated spectrometer, a time-gated pinhole camera, and a streak camera. A wire dynamic model was applied to study implosion characteristics, and non-LTE Cu and Zn kinetic models were used to model L-shell radiation from brass. The analysis of the time-gated spectra showed a correlation between the modeled electron temperature and the X-ray signal, and it agrees well with the maximum values from the time-integrated spatially resolved spectra. Modeling of time-gated and time-integrated spectra from brass PWAs indicates stronger opacity effects in L-shell lines for DPWAs.

-Pinches

This article reports on the joint success of two independent lines of research, each of them being a multi-year international effort. One of these is the development of innovative sources, such as planar wire arrays (PWAs). PWAs turned out to be a prolific radiator, which act mainly as a resistor, even though the physical mechanism of efficient magnetic energy conversion into radiation still remains unclear. We review the results of our extensive studies of PWAs. We also report the new results of the experimental comparison PWAs with planar foil liners (another promising alternative to wire array loads at multi-mega-ampere generators). Pioneered at UNR, the PWA Z-pinch loads have later been tested at the Sandia National Laboratories (SNL) on the Saturn generator, on GIT-12 machine in Russia, and on the QiangGuang-1 generator in China, always successfully. Another of these is the drastic improvement in energy efficiency of pulsed-power systems, which started in early 1980s with Zuckers experiments at Nava...

Studies of Radiative and Implosion Characteristics From Brass Planar Wire Arrays

The double planar wire array (DPWA) Z pinch is a highly efficient radiation source with unique implosion dynamics and precursor formations. The inductively divided current successively ablates the wires and injects the material to the interior of the array. Three uniquely imploding DPWA load types were identified and classified according to the critical load parameter: low, intermediate, or high aspect ratio. Radiation pulse shaping was obtained from secondary precursors: off-axis mass carrying high current densities during the implosion phase. Time-gated EUV spectroscopy of off-axis mass accumulations is used to assess a 60 eV electron temperature prior to the implosion phase. These structures are shown to form by a different mechanism than the secondary precursors. High yields, compact size, and shaped radiation pulses merit further consideration of the DPWA as a candidate for inertial confinement fusion research.

Radiation sources with planar wire arrays and planar foils for inertial confinement fusion and high energy density physics research

Experiments to study the implosion dynamics and radiation characteristics of copper z-pinches have been fielded at the 1 MA Zebra facility and the 20 MA Z facility. The impact of initial load mass, initial load diameter, and nesting of wire arrays on the precursor and the stagnated plasma has been evaluated through spectroscopy, shadowgraphy, and fluence measurements. Plasma parameters extracted from modeling of the time-integrated L-shell spectra indicate the presence of more than one plasma source contributing to the radiation, likely due to non-uniform hot spot x-ray emission or temporal gradients.