Ilana Perelshtein

Sonochemical coating of silver nanoparticles on textile fabrics (nylon, polyester and cotton) and their antibacterial activity

Silver nanoparticles were synthesized and deposited on different types of fabrics using ultrasound irradiation. The structure of silver-fabric composites was studied by physico-chemical methods. The mechanism of the strong adhesion of silver nanoparticles to the fibers is discussed. The excellent antibacterial activity of the Ag-fabric composite against Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) cultures was demonstrated.

Antibacterial Properties of an In Situ Generated and Simultaneously Deposited Nanocrystalline ZnO on Fabrics

Zinc oxide (ZnO) nanoparticles were synthesized and deposited on the surface of cotton fabrics using ultrasound irradiation. Optimization of the process resulted in a homogeneous distribution of ZnO nanocrystals, 30 nm in size, on the fabric surface. The mechanism of the ultrasound-assisted coating was proposed. The antibacterial activities of the ZnO-fabric composite were tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) cultures. A significant bactericidal effect, even in a 0.75% coated fabric (wt %), was demonstrated.

Sonochemical Coating of Textiles with Hybrid ZnO/Chitosan Antimicrobial Nanoparticles

Textiles are good substrates for growth of microorganisms especially under moisture and temperature conditions found in hospitals. Microbial shedding from the body occurs continuously at contact of the patient with textile materials used in medical practices, contributing to the occurrence of hospital acquired infections. Thus, the use of efficient antimicrobial textiles is necessary to prevent the transfer of pathogens and the infection incidence. In this work, hybrid antimicrobial coatings were generated on cotton fabrics by means of a one-step simultaneous sonochemical deposition of ZnO nanoparticles (NPs) and chitosan. The process was further optimized in terms of reagents concentration and processing time in order to improve the antibacterial properties of the fabric and ensure their biocompatibility. The highest antibacterial activity of the fabrics against two medically relevant bacterial species was achieved in a 30 min sonochemical coating process using 2 mM ZnO NPs suspension. When chitosan was simultaneously deposited with the same amount of ZnO, the obtained hybrid NPs coating displayed higher by 48 and 17% antibacterial activity against Staphylococcus aureus and Escherichia coli, respectively. The presence of biopolymer also improved the durability of the antimicrobial effect of the coatings by 21% for Staphylococcus aureus and 40% for Escherichia coli, evaluated after applying multiple washing cycles at hospital laundering regimes. Finally, 87% biocompatibility improvement supported by fibroblast viability was observed for the hybrid ZnO/chitosan coating compared to the steady decrease of cells viability over one week in contact with the fabrics coated with ZnO alone.

Eradication of Multi‐Drug Resistant Bacteria by a Novel Zn‐doped CuO Nanocomposite

Zinc-doped copper oxide nanoparticles are synthesized and simultaneously deposited on cotton fabric using ultrasound irradiation. The optimization of the processing conditions, the specific reagent ratio, and the precursor concentration results in the formation of uniform nanoparticles with an average size of ≈30 nm. The antibacterial activity of the Zn-doped CuO Cu₀.₈₈Zn₀.₁₂O in a colloidal suspension or deposited on the fabric is tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) bacteria. A substantial enhancement of 10,000 times in the antimicrobial activity of the Zn-CuO nanocomposite compared to the pure CuO and ZnO nanoparticles (NPs) is observed after 10 min exposure to the bacteria. Similar activities are observed against multidrug-resistant bacteria (MDR), (i.e., Methicillin-resistant S. aureus and MDR E. coli) further emphasizing the efficacy of this composite. Finally, the mechanism for this enhanced antibacterial activity is presented.

A One‐Step Process for the Antimicrobial Finishing of Textiles with Crystalline TiO2 Nanoparticles

Titanium oxide (TiO(2)) nanoparticles (NPs) in their two forms, anatase and rutile, were synthesized and deposited onto the surface of cotton fabrics by using ultrasonic irradiation. The structure and morphology of the nanoparticles were analyzed by using characterization methods such as XRD, TEM, STEM, and EDS. The antimicrobial activities of the TiO(2)-cotton composites were tested against Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) strains, as well as against Candida albicans. Significant antimicrobial effect was observed, mainly against Staphylococcus aureus. In addition, the combination of visible light and TiO(2) NPs showed enhanced antimicrobial activity.

The influence of the crystalline nature of nano-metal oxides on their antibacterial and toxicity properties

The antibacterial properties of nano-metal oxides (ZnO, CuO) are based on the formation of reactive oxygen species (ROS). This work reveals that the antibacterial properties of these nano-metal oxides are strongly dependent on their crystalline structure. The antibacterial activity of the nanooxides was tested against four types of bacteria that commonly cause nosocomial infections. The sonochemical method was applied not only for synthesis of nanooxides but also to their coating on textiles. The antibacterial properties of textiles coated with commercial and sonochemically prepared nano-metal oxides were evaluated and compared. The toxicity was evaluated on human lung cells and amphibian embryos, as representative models for inhalation and aquatic toxicology. The sonochemically prepared metal nanooxides are better antimicrobials than commercially available metal oxides with the same particle size range. It was found that the crystallites which have more defects and less organized structure are more toxic. The formation of ROS was studied by electron spin resonance (ESR) measurements for both the sonochemically prepared and commercial samples of ZnO/CuO nanoparticles. A significant increase in the production of radical species was found in the more defective, sonochemically prepared samples, as compared to the commercial ones. Since modulation of the nanoparticle defects influenced their toxicity, the possibility of engineering safer nano-antibacterials is indicated.

Enzymatic pre-treatment as a means of enhancing the antibacterial activity and stability of ZnO nanoparticles sonochemically coated on cotton fabrics

Zinc oxide nanoparticles (ZnO NPs) are known for their excellent antibacterial properties. This paper describes a method for enhancing the stability and the antibacterial activity of ZnO NPs synthesized and embedded sonochemically on cotton fabrics, by pre-treating the fabric surface with cellulase enzyme. The enzymatic pre-treatment resulted in the deposition of smaller sized NPs with improved adhesion. The reduction in particle size brought about better antibacterial performance against several types of bacteria. The sonochemically produced ZnO coating withstood 10 laundry cycles at 92 °C retaining its antibacterial activity.

Making the hospital a safer place by sonochemical coating of all its textiles with antibacterial nanoparticles

The ability to scale-up the sonochemical coating of medical textiles with antibacterial nanoparticles is demonstrated in the current paper. A roll-to-roll pilot installation to coat textiles was built taking into consideration the requirements of the sonochemical process. A long-run experiment was conducted in which 2500 m of fabric were coated with antibacterial ZnO nanoparticles (NPs). The metal oxide NPs were deposited from an ethanol:water solution. In this continuous process a uniform concentration of coated NPs over the length/width of the fabric was achieved. The antibacterial efficiency of the sonochemically-coated textiles was validated in a hospital environment by a reduction in the occurrence of nosocomial infections. NP-coated bed sheets, patient gowns, pillow cover, and bed covers were used by 21 patients. For comparison 16 patients used regular textiles. The clinical data indicated the reduced occurrence of hospital-acquired infections when using the metal oxide NP-coated textiles. In order to reduce the cost of the coating process and considering safety issues during manufacturing, the solvent (ethanol:water) (9:1 v:v) used for the long-run experiment, was replaced by water. Although lesser amounts of ZnO NPs were deposited on the fabric in the water-based process the antibacterial activity of the textiles was preserved due to the smaller size of the particles.

Sonochemical synthesis, structural, magnetic and grain size dependent electrical properties of NdVO4 nanoparticles

NdVO4 nanoparticles are successfully synthesized by efficient sonochemical method using two different structural directing agents like CTAB and P123. The phase formation and functional group analysis are carried out using X-ray diffraction (XRD) and fourier transform infra red (FT-IR) spectra, respectively. Using Scherrer equation the calculated grain sizes are 27 nm, 24 nm and 20 nm corresponding to NdVO4 synthesized by without surfactant, with CTAB and P123, respectively. The TEM images revealed that the shape of NdVO4 particles is rice-like and rod shaped particles while using CTAB and P123 as surfactants. The growth mechanism of NdVO4 nanoparticles is elucidated with the aid of TEM analysis. From electrical analysis, the conductivity of NdVO4 nanoparticles synthesized without surfactant showed a higher conductivity of 5.5703 × 10(-6) S cm(-1). The conductivity of the material depends on grain size and increased with increase in grain size due to the grain size effect. The magnetic measurements indicated the paramagnetic behavior of NdVO4 nanoparticles.

Tannic acid NPs – Synthesis and immobilization onto a solid surface in a one-step process and their antibacterial and anti-inflammatory properties

Tannic acid nanoparticles were synthesized from an aqueous solution without the use of stabilizers via a sonochemical process. In order to avoid the dissolution of the formed nanoparticles, the sonochemical reaction was performed in the presence of a cotton fabric: following their formation, the tannic acid nanoparticles were embedded into the cotton substrate in a one-step process. The bioactive properties of the tannic acid coated surface were examined towards the inhibition of myeloperoxidase and collagenase, two major enzymes related with inflammatory processes. In addition, the antibacterial activity of the tannic acid nanoparticles coated textiles was evaluated against Staphylococcus aureus and Pseudomonas aeruginosa.