Nina Perkas

Sonochemical coating of silver nanoparticles on textile fabrics (nylon, polyester and cotton) and their antibacterial activity

Silver nanoparticles were synthesized and deposited on different types of fabrics using ultrasound irradiation. The structure of silver-fabric composites was studied by physico-chemical methods. The mechanism of the strong adhesion of silver nanoparticles to the fibers is discussed. The excellent antibacterial activity of the Ag-fabric composite against Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) cultures was demonstrated.

Antibacterial Properties of an In Situ Generated and Simultaneously Deposited Nanocrystalline ZnO on Fabrics

Zinc oxide (ZnO) nanoparticles were synthesized and deposited on the surface of cotton fabrics using ultrasound irradiation. Optimization of the process resulted in a homogeneous distribution of ZnO nanocrystals, 30 nm in size, on the fabric surface. The mechanism of the ultrasound-assisted coating was proposed. The antibacterial activities of the ZnO-fabric composite were tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) cultures. A significant bactericidal effect, even in a 0.75% coated fabric (wt %), was demonstrated.

Inhibition of herpes simplex virus type 1 infection by silver nanoparticles capped with mercaptoethane sulfonate.

Interactions between biomolecules and nanoparticles suggest the use of nanoparticles for various medical interventions. The attachment and entry of herpes simplex virus type 1 (HSV-1) into cells involve interaction between viral envelope glycoproteins and cell surface heparan sulfate (HS). Based on this mechanism, we designed silver nanoparticles that are capped with mercaptoethane sulfonate (Ag-MES). These nanoparticles are predicted to target the virus and to compete for its binding to cellular HS through their sulfonate end groups, leading to the blockage of viral entry into the cell and to the prevention of subsequent infection. Structurally defined Ag-MES nanoparticles that are readily redispersible in water were sonochemically synthesized. No toxic effects of these nanoparticles on host cells were observed. Effective inhibition of HSV-1 infection in cell culture by the capped nanoparticles was demonstrated. However, application of the soluble surfactant MES failed to inhibit viral infection, implying that the antiviral effect of Ag-MES nanoparticles is imparted by their multivalent nature and spatially directed MES on the surface. Our results suggest that capped nanoparticles may serve as useful topical agents for the prevention of infections with pathogens dependent on HS for entry.

Sonochemical coating of paper by microbiocidal silver nanoparticles.

Colloidal silver has gained wide acceptance as an antimicrobial agent, and various substrates coated with nanosilver such as fabrics, plastics, and metal have been shown to develop antimicrobial properties. Here, a simple method to develop coating of colloidal silver on paper using ultrasonic radiation is presented, and the coatings are characterized using X-ray diffraction (XRD), high resolution scanning electron microscope (HRSEM), and thermogravimetry (TGA) measurements. Depending on the variables such as precursor concentrations and ultrasonication time, uniform coatings ranging from 90 to 150 nm in thickness have been achieved. Focused ion beam (FIB) cross section imaging measurements revealed that silver nanoparticles penetrated the paper surface to a depth of more than 1 μm, resulting in highly stable coatings. The coated paper demonstrated antibacterial activity against E. coli and S. aureus, suggesting its potential application as a food packing material for longer shelf life.

ZnO nanoparticle-coated surfaces inhibit bacterial biofilm formation and increase antibiotic susceptibility

Nanotechnology is providing new ways to manipulate the structure and chemistry of surfaces to inhibit bacterial colonization. In this study, we evaluated the ability of glass slides coated with zinc oxide (ZnO) nanoparticles to restrict the biofilm formation of common bacterial pathogens. The generation of hydroxyl radicals, originating from the coated surface, was found to play a key role in antibiofilm activity. Furthermore, we evaluated the ability of the nanoparticle coating to enhance the antibacterial activity of commonly-used antibiotics. The ZnO nanoparticles were synthesized and deposited on the surface of glass slides using a one-step ultrasound irradiation process. Several physico-chemical surface characterization methods were performed to prove the long-term stability and homogenity of the coated films. Collectively, our findings may open a new door for utilizing ZnO nanoparticle films as antibiofilm coating of surfaces, thus providing a versatile platform for a wide range of applications both in medical and industrial settings, all of which are prone to bacterial colonization.

Oxidation of cyclohexane with nanostructured amorphous catalysts under mild conditions

The oxidation of cyclohexane with molecular oxygen (1 atm) in the presence of isobutyraldehyde catalyzed by nanostructured iron and cobalt oxides and iron supported on titania has been studied. It was found that highly dispersed transition metals oxide is more effective for oxidation than the corresponding zero valent powders. In the titania supported catalysts iron exists as iron (III) oxide segregated to the surface layers and stabilized by titania. This form is the most active in the cyclohexane oxidation under mild conditions.

Eradication of Multi‐Drug Resistant Bacteria by a Novel Zn‐doped CuO Nanocomposite

Zinc-doped copper oxide nanoparticles are synthesized and simultaneously deposited on cotton fabric using ultrasound irradiation. The optimization of the processing conditions, the specific reagent ratio, and the precursor concentration results in the formation of uniform nanoparticles with an average size of ≈30 nm. The antibacterial activity of the Zn-doped CuO Cu₀.₈₈Zn₀.₁₂O in a colloidal suspension or deposited on the fabric is tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) bacteria. A substantial enhancement of 10,000 times in the antimicrobial activity of the Zn-CuO nanocomposite compared to the pure CuO and ZnO nanoparticles (NPs) is observed after 10 min exposure to the bacteria. Similar activities are observed against multidrug-resistant bacteria (MDR), (i.e., Methicillin-resistant S. aureus and MDR E. coli) further emphasizing the efficacy of this composite. Finally, the mechanism for this enhanced antibacterial activity is presented.

A One‐Step Process for the Antimicrobial Finishing of Textiles with Crystalline TiO2 Nanoparticles

Titanium oxide (TiO(2)) nanoparticles (NPs) in their two forms, anatase and rutile, were synthesized and deposited onto the surface of cotton fabrics by using ultrasonic irradiation. The structure and morphology of the nanoparticles were analyzed by using characterization methods such as XRD, TEM, STEM, and EDS. The antimicrobial activities of the TiO(2)-cotton composites were tested against Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) strains, as well as against Candida albicans. Significant antimicrobial effect was observed, mainly against Staphylococcus aureus. In addition, the combination of visible light and TiO(2) NPs showed enhanced antimicrobial activity.

Using Sonochemical Methods for the Preparation of Mesoporous Materials and for the Deposition of Catalysts into the Mesopores

Ultrasound radiation can be used to synthesize a variety of mesporous materials. The reaction time is considerably shorter than the conventional methods. Ultrasonic waves can be further used for the insertion of amorphous nanosized catalysts into the mesopores. A detailed study demonstrates that the nanoparticles are deposited as a monolayer on the inner mesopores walls without blocking them. When the ultrasonically prepared catalyst/mesoporous-subtrate composite is used in catalysis a high conversion into product is obtained.

Preparation of porous cobalt and nickel oxides from corresponding alkoxides using a sonochemical technique and its application as a catalyst in the oxidation of hydrocarbons

Porous nickel and cobalt oxides were prepared using their alkoxides as inorganic precursors. The stabilization of the mesostructure is especially critical for divalent elements such as Ni and Co, which do not form any network structure, like silicates. The lack of a network-forming multivalent bond is the probable reason why no stable mesoporous oxides have been synthesized for divalent elements yet. Here we have reported our attempt to synthesize porous oxides of Ni and Co. Octadecylamine has been used as the organic structure-directing agent. The product obtained was put under solvent extraction and calcination at various temperatures to remove the surfactant, followed by characterization using XRD, TEM and BET measurements. The FT/IR and thermal analyses (TGA and DSC) were also carried out for supporting information, such as extent of removal of surfactant from the pores of the metal oxide. A relatively better surface area has been obtained for the Co oxide, but in Ni the surface area found is not as good. A possible reason for that has been discussed. The porous (solvent extracted) cobalt oxide has been used as a catalyst in the oxidation reaction of cyclohexane in mild conditions. The catalyst has shown relatively better conversion of cyclohexane into cyclohexanone and cyclohexanol than the nanostructured cobalt oxide catalyst of regular structure.