Ildar Salikhov

EPR spectrometer for clinical applications

This article describes an EPR spectrometer specifically designed and constructed for EPR spectroscopy in humans. The spectrometer is based on a permanent magnet, suitable for measurements at 1200 MHz. The magnet has a full 50 cm gap between the poles, which facilitates accurate and comfortable placement of the subject for the EPR measurement at any location on the human body. The bridge includes features to facilitate clinical operations, including an indicator for phasing of the reference arm and a 2 level RF amplifier. Resonators with holders for each type and site of measurement have been developed that comfortably position the resonator and the patient and prevent artifacts due to motion. The initial applications for which the spectrometer has been designed are for oximetry using loops on the surface, oximetry using implanted resonators for measuring deep sites, and measurements in the teeth for determination of exposures to clinically significant doses of ionizing radiation. Magn Reson Med, 2005.

An improved external loop resonator for in vivo L-band EPR spectroscopy.

An improved external loop resonator (ELR) used for L-band electron paramagnetic resonance (EPR) spectroscopy is reported. This improvement is achieved by shortening the parallel coaxial line. The resonant structure is formed by two single turn coils (10mm in diameter) that are connected to a parallel coaxial line. A resonance frequency of 1197 MHz and a quality factor of 466 were obtained in the absence of biological tissue and were approximately 1130 MHz and approximately 50 with a living animal, respectively. The sensitivity of the new ELR was compared to the previously developed ELR using three types of EPR samples: (1) paramagnetic material with no biological tissue, (2) paramagnetic material in a leg and in the peritoneal cavity of a dead rat, and (3) paramagnetic material in the back of an anesthetized rat. The sensitivity was 1.2-1.6 times greater in the rat and 4.2 times without tissue.

Physically-based biodosimetry using in vivo EPR of teeth in patients undergoing total body irradiation.

Purpose: The ability to estimate individual exposures to radiation following a large attack or incident has been identified as a necessity for rational and effective emergency medical response. In vivo electron paramagnetic resonance (EPR) spectroscopy of tooth enamel has been developed to meet this need. Materials and methods: A novel transportable EPR spectrometer, developed to facilitate tooth dosimetry in an emergency response setting, was used to measure upper incisors in a model system, in unirradiated subjects, and in patients who had received total body doses of 2 Gy. Results: A linear dose response was observed in the model system. A statistically significant increase in the intensity of the radiation-induced EPR signal was observed in irradiated versus unirradiated subjects, with an estimated standard error of dose prediction of 0.9 ± 0.3 Gy. Conclusions: These results demonstrate the current ability of in vivo EPR tooth dosimetry to distinguish between subjects who have not been irradiated and those who have received exposures that place them at risk for acute radiation syndrome. Procedural and technical developments to further increase the precision of dose estimation and ensure reliable operation in the emergency setting are underway. With these developments EPR tooth dosimetry is likely to be a valuable resource for triage following potential radiation exposure of a large population.

ELECTRON PARAMAGNETIC RESONANCE DOSIMETRY FOR A LARGE-SCALE RADIATION INCIDENT

Abstract With possibilities for radiation terrorism and intensified concerns about nuclear accidents since the recent Fukushima Daiichi event, the potential exposure of large numbers of individuals to radiation that could lead to acute clinical effects has become a major concern. For the medical community to cope with such an event and avoid overwhelming the medical care system, it is essential to identify not only individuals who have received clinically significant exposures and need medical intervention but also those who do not need treatment. The ability of electron paramagnetic resonance to measure radiation-induced paramagnetic species, which persist in certain tissues (e.g., teeth, fingernails, toenails, bone, and hair), has led to this technique becoming a prominent method for screening significantly exposed individuals. Although the technical requirements needed to develop this method for effective application in a radiation event are daunting, remarkable progress has been made. In collaboration with General Electric and through funding committed by the Biomedical Advanced Research and Development Authority, electron paramagnetic resonance tooth dosimetry of the upper incisors is being developed to become a Food and Drug Administration-approved and manufacturable device designed to carry out triage for a threshold dose of 2 Gy. Significant progress has also been made in the development of electron paramagnetic resonance nail dosimetry based on measurements of nails in situ under point-of-care conditions, and in the near future this may become a second field-ready technique. Based on recent progress in measurements of nail clippings, it is anticipated that this technique may be implementable at remotely located laboratories to provide additional information when the measurements of dose on-site need to be supplemented. The authors conclude that electron paramagnetic resonance dosimetry is likely to be a useful part of triage for a large-scale radiation incident.

Black Magic and EPR Oximetry

EPR oximetry is a technique that can make repeated non-invasive measurements of the pO2 in tissues. To extend the application of EPR oximetry to humans, India ink is the probe of choice because appropriate India inks have EPR signals whose line widths are sensitive to changes in oxygen concentrations, and, most importantly, India ink already has been used extensively in humans as a marker in the skin, lymphatics, various organs during surgery, tumors, and for decoration as tattoos.

Surface loop resonator design for in vivo EPR tooth dosimetry using finite element analysis.

Finite element analysis is used to evaluate and design L-band surface loop resonators for in vivo electron paramagnetic resonance (EPR) tooth dosimetry. This approach appears to be practical and useful for the systematic examination and evaluation of resonator configurations to enhance the precision of dose estimates. The effects of loop positioning in the mouth are examined, and it is shown that the sensitivity to loop position along a row of molars is decreased as the loop is moved away from the teeth.