Irina G. Irtegova

Interaction of 1,2,5-Chalcogenadiazole Derivatives with Thiophenolate: Hypercoordination with Formation of Interchalcogen Bond versus Reduction to Radical Anion

According to the DFT calculations, [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (4), [1,2,5]selenadiazolo[3,4-c][1,2,5]thiadiazole (5), 3,4-dicyano-1,2,5-thiadiazole (6), and 3,4-dicyano-1,2,5-selenadiazole (7) have nearly the same positive electron affinity (EA). Under the CV conditions they readily produce long-lived π-delocalized radical anions (π-RAs) characterized by EPR. Whereas 4 and 5 were chemically reduced into the π-RAs with thiophenolate (PhS(-)), 6 did not react and 7 formed a product of hypercoordination at the Se center (9) isolated in the form of the thermally stable salt [K(18-crown-6)][9] (10). The latter type of reactivity has never been observed previously for any 1,2,5-chalcogenadiazole derivatives. The X-ray structure of salt 10 revealed that the Se-S distance in the anion 9 (2.722 Å) is ca. 0.5 Å longer than the sum of the covalent radii of these atoms but ca. 1 Å shorter than the sum of their van der Waals radii. According to the QTAIM and NBO analysis, the Se-S bond in 9 can be considered a donor-acceptor bond whose formation leads to transfer of ca. 40% of negative charge from PhS(-) onto the heterocycle. For various PhS(-)/1,2,5-chalcogenadiazole reaction systems, thermodynamics and kinetics were theoretically studied to rationalize the interchalcogen hypercoordination vs reduction to π-RA dichotomy. It is predicted that interaction between PhS(-) and 3,4-dicyano-1,2,5-telluradiazole (12), whose EA slightly exceeds that of 6 and 7, will lead to hypercoordinate anion (17) with the interchalcogen Te-S bond being stronger than the Se-S bond observed in anion 9.

Bis(toluene)chromium(I) [1,2,5]Thiadiazolo[3,4-c][1,2,5]thiadiazolidyl and [1,2,5]Thiadiazolo[3,4-b]pyrazinidyl: New Heterospin (S1 = S2 = 1/2) Radical-Ion Salts

Bis(toluene)chromium(0), Cr(0)(η(6)-C7H8)2 (3), readily reduced [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (1) and [1,2,5]thiadiazolo[3,4-b]pyrazine (2) in a tetrahydrofuran solvent with the formation of heterospin, S1 = S2 = ½, radical-ion salts [3](+)[1](-) (4) and [3](+)[2](-) (5) isolated in high yields. The salts 4 and 5 were characterized by single-crystal X-ray diffraction (XRD), solution and solid-state electron paramagnetic resonance, and magnetic susceptibility measurements in the temperature range 2-300 K. Despite the formal similarity of the salts, their crystal structures were very different and, in contrast to 4, in 5 anions were disordered. For the XRD structures of the salts, parameters of the Heisenberg spin Hamiltonian were calculated using the CASSCF/NEVPT2 and broken-symmetry density functional theory approaches, and the complex magnetic motifs featuring the dominance of antiferromagnetic (AF) interactions were revealed. The experimental χT temperature dependences of the salts were simulated using the Van Vleck formula and a diagonalization of the matrix of the Heisenberg spin Hamiltonian for the clusters of 12 paramagnetic species with periodic boundary conditions. According to the calculations and χT temperature dependence simulation, a simplified magnetic model can be suggested for the salt 4 with AF interactions between the anions ([1](-)···[1](-), J1 = -5.77 cm(-1)) and anions and cations ([1](-)···[3](+), J2 = -0.84 cm(-1)). The magnetic structure of the salt 5 is much more complex and can be characterized by AF interactions between the anions, [2](-)···[2](-), and by both AF and ferromagnetic (FM) interactions between the anions and cations, [2](-)···[3](+). The contribution from FM interactions to the magnetic properties of the salt 5 is in qualitative agreement with the positive value of the Weiss constant Θ (0.4 K), whereas for salt 4, the constant is negative (-7.1 K).

Interaction of 1,3,2,4-Benzodithiadiazines and Their 1-Se Congeners with Ph3P and Some Properties of the Iminophosphorane Products

Interaction between Ph(3)P and 1,3,2,4-benzodithiadiazine (1); its 6,7-difluoro (2), 5,6,8-trifluoro (3) and 5,6,7,8-tetrafluoro (4) derivatives; and 5,6,8-trifluoro-3,1,2,4-benzothiaselenadiazine (5) proceeded via a 1:1 condensation to give Ph(3)P═N-R iminophosphoranes (1a-5a, R = corresponding 1,2,3-benzodichalcogenazol-2-yls), which are inaccessible by general approaches based on the Staudinger and Kirsanov reactions. In contrast, neither Ph(3)As nor Ph(3)Sb reacted with 1 and 4. Molecular structures of 1a-5a and 5 were confirmed by X-ray diffraction (XRD). The crystals formed by chiral molecules of 2a-5a were racemic, whereas the crystal of 1a was formed by a single enantiomer. In all of the Ph(3)P═N-R derivatives, one of the Ph rings is oriented face-to-face to the hetero ring, R. Upon heating to ∼120 °C in squalane (1a, 3a, 4a) or dissolving in chloroform at ambient temperatures (1a, 2a, 4a), the Ph(3)P═N-R derivatives generated the 1,2,3-benzodithiazolyls (1b-4b, respectively) whose identity was confirmed by electron paramagnetic resonance (EPR). 2,1,3-Benzothiaselenazolyls 5b and 6b were detected by EPR as the main paramagnetic products of solution thermolysis of 5 and its 5,6,7,8-tetrafluoro congener (6), respectively. Passing a chloroform solution of 4a through silica column unexpectedly gave 5-6-6-6 tetracyclic (9) and 6-10-6 tricyclic (10) sulfur-nitrogen compounds, which were characterized by XRD.

Synthesis and properties of the heterospin (S1 = S2 = 1/2) radical-ion salt bis(mesitylene)molybdenum(I) [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazolidyl

Low-temperature interaction of [1,2,5]thiadiazolo[3,4-c][1,2,5]thiadiazole (1) with MoMes2 (Mes = mesitylene/1,3,5-trimethylbenzene) in tetrahydrofuran gave the heterospin (S1 = S2 = (1)/2) radical-ion salt [MoMes2](+)[1](-) (2) whose structure was confirmed by single-crystal X-ray diffraction (XRD). The structure revealed alternating layers of the cations and anions with the Mes ligands perpendicular, and the anions tilted by 45°, to the layer plane. At 300 K the effective magnetic moment of 2 is equal to 2.40 μB (theoretically expected 2.45 μB) and monotonically decreases with lowering of the temperature. In the temperature range 2-300 K, the molar magnetic susceptibility of 2 is well-described by the Curie-Weiss law with parameters C and θ equal to 0.78 cm(3) K mol(-1) and -31.2 K, respectively. Overall, the magnetic behavior of 2 is similar to that of [CrTol2](+)[1](-) and [CrCp*2](+)[1](-), i.e., changing the cation [MAr2](+) 3d atom M = Cr (Z = 24) with weak spin-orbit coupling (SOC) to a 4d atom M = Mo (Z = 42) with stronger SOC does not affect macroscopic magnetic properties of the salts. For the XRD structure of salt 2, parameters of the Heisenberg spin-Hamiltonian were calculated using the broken-symmetry DFT and CASSCF approaches, and the complex 3D magnetic structure with both the ferromagnetic (FM) and antiferromagnetic (AF) exchange interactions was revealed with the latter as dominating. Salt 2 is thermally unstable and slowly loses the Mes ligands upon storage at ambient temperature. Under the same reaction conditions, interaction of 1 with MoTol2 (Tol = toluene) proceeded with partial loss of the Tol ligands to afford diamagnetic product.

Fused 1,2,3-Thiaselenazoles Synthesized from 1,2,3-Dithiazoles through Selective Chalcogen Exchange

A new approach to the synthesis of fused 1,2,3-thiaselenazoles-rare five-membered heterocycles that contain two different chalcogens-from the corresponding 1,2,3-dithiazoles and SeO2 was accomplished by selective exchange of S and Se atoms. The fused carbo- and heterocyclic units were indene, naphthalenone, cyclohexadienone, cyclopentadiene, benzoannulene, and benzoxazine. The molecular structures of two of the thiaselenadiazole products and one of the dithiazole precursors were confirmed by single-crystal X-ray diffraction. The reaction is highly solvent selective; it only takes place in solvents that contain a C=O group (e.g., DMF or tetramethylurea). According to DFT calculations, the reaction is thermodynamically favorable. Based on the DFT calculations and 77 Se NMR spectroscopy, two tentative mechanisms that feature isomeric transition states and intermediates are suggested for the reaction via ring-opening addition of SeO2 to the S-X dithiazole bond (X=N or S). The DFT-calculated first adiabatic electron affinities of the compounds were chalcogen independent and positive in all cases, which assumes formation of thermodynamically stable radical anions (RAs). These calculated RAs featured either normal or abnormal elongation of the S1-X2 (X=S or Se) bond relative to their neutral precursors and possessed π* or σ* SOMOs, respectively.

Fused 1,2,3-Dithiazoles: Convenient Synthesis, Structural Characterization, and Electrochemical Properties

A new general protocol for synthesis of fused 1,2,3-dithiazoles by the reaction of cyclic oximes with S2Cl2 and pyridine in acetonitrile has been developed. The target 1,2,3-dithiazoles fused with various carbocycles, such as indene, naphthalenone, cyclohexadienone, cyclopentadiene, and benzoannulene, were selectively obtained in low to high yields. In most cases, the hetero ring-closure was accompanied by chlorination of the carbocyclic moieties. With naphthalenone derivatives, a novel dithiazole rearrangement (15→13) featuring unexpected movement of the dithiazole ring from α- to β-position, with respect to keto group, was discovered. Molecular structure of 4-chloro-5H-naphtho[1,2-d][1,2,3]dithiazol-5-one 13 was confirmed by single-crystal X-ray diffraction. Electrochemical properties of 13 were studied by cyclic voltammetry and a complex behavior was observed, most likely including hydrodechlorination at a low potential.

Radical Anions, Radical-Anion Salts and Anionic Complexes of 2,1,3-Benzochalcogenadiazoles (S, Se, Te)

By means of cyclic voltammetry (CV) and DFT calculations, it was found that the electron-acceptor ability of 2,1,3-benzochalcogenadiazoles 1-3 (chalcogen: S, Se, and Te, respectively) increases with increasing atomic number of the chalcogen. This trend is nontrivial, since it contradicts the electronegativity and atomic electron affinity of the chalcogens. In contrast to radical anions (RAs) [1].- and [2].- , RA [3].- was not detected by EPR spectroscopy under CV conditions. Chemical reduction of 1-3 was performed and new thermally stable RA salts [K(THF)]+ [2].- (8) and [K(18-crown-6)]+ [2].- (9) were isolated in addition to known salt [K(THF)]+ [1].- (7). On contact with air, RAs [1].- and [2].- underwent fast decomposition in solution with the formation of anions [ECN]- , which were isolated in the form of salts [K(18-crown-6)]+ [ECN]- (10, E=S; 11, E=Se). In the case of 3, RA [3].- was detected by EPR spectroscopy as the first representative of tellurium-nitrogen π-heterocyclic RAs but not isolated. Instead, salt [K(18-crown-6)]+ 2 [3-Te2 ]2- (12) featuring a new anionic complex with coordinate Te-Te bond was obtained. On contact with air, salt 12 transformed into salt [K(18-crown-6)]+ 2 [3-Te4 -3]2- (13) containing an anionic complex with two coordinate Te-Te bonds. The structures of 8-13 were confirmed by XRD, and the nature of the Te-Te coordinate bond in [3-Te2 ]2- and [3-Te4 -3]2- was studied by DFT calculations and QTAIM analysis.

CCDC 805247: Experimental Crystal Structure Determination

Related Article: E.A.Suturina, N.A.Semenov, A.V.Lonchakov, I.Yu.Bagryanskaya, Y.V.Gatilov, I.G.Irtegova, N.V.Vasilieva, E.Lork, R.Mews, N.P.Gritsan, A.V.Zibarev|2011|J.Phys.Chem.A|115|4851|doi:10.1021/jp2019523

Synthesis and electrochemical Reduction of 2,2′-diaryl-5,5,5′,5′-tetramethyl-3,3′-bi(pyrrol-3-ylidene)-4,4′(5H,5′H)-dione 1,1′-dioxides

Abstract2,2′-Diaryl-5,5,5′,5′-tetramethyl-3,3′-bi(pyrrol-3-ylidene)-4,4′(5H,5′H)-dione 1,1′-dioxides containing a carboxy, alkoxycarbonyl, or carbamoyl group in the para position of one or both benzene rings were synthesized. These compounds may be regarded as cyclic dinitrones with conjugated C=C bond. Mild aminolysis of carboxy groups in the title compounds may be used to introduce dinitrone fragments into oligonucleotide or polypeptide structures. Electrochemical reduction of the resulting amides involves reversible oneelectron transfer in the first step at a near-zero potential, which makes it possible to use the title compounds as electrochemically active labels in applied bioorganic electrochemistry.