J.M. Palacios-Santander

Multicomponent analysis of electrochemical signals in the wavelet domain

Successful applications of multivariate calibration in the field of electrochemistry have been recently reported, using various approaches such as multilinear regression (MLR), continuum regression, partial least squares regression (PLS) and artificial neural networks (ANN). Despite the good performance of these methods, it is nowadays accepted that they can benefit from data transformations aiming at removing baseline effects, reducing noise and compressing the data. In this context the wavelet transform seems a very promising tool. Here, we propose a methodology, based on the fast wavelet transform, for feature selection prior to calibration. As a benchmark, a data set consisting of lead and thallium mixtures measured by differential pulse anodic stripping voltammetry and giving seriously overlapped responses has been used. Three regression techniques are compared: MLR, PLS and ANN. Good predictive and effective models are obtained. Through inspection of the reconstructed signals, identification and interpretation of significant regions in the voltammograms are possible.

New, fast and green procedure for the synthesis of gold nanoparticles based on sonocatalysis

An easy, cheap and green synthetic route, using high-power ultrasounds and sodium citrate dihydrate as non-toxic reducing and stabilizer agent, produces gold nanoparticles in aqueous solution, and at ambient conditions. The time required for the synthesis is 5.5 min. The spherical nanoparticles obtained by this route show a homogeneous size distribution, within the range 5-17 nm, with an average diameter of 10±1 nm. Moreover, 90% of the particles have a diameter ranging from 7 to 13 nm, and their half-life is more than 30 days. The gold nanoparticles synthesized following this route are known as sononanoparticles. Gold sononanoparticles have been characterized by TEM and XRD and their stability has been studied by UV-Vis spectroscopy. Alternative experimental designs are compared to optimize the proposed synthesis procedure.

Sonosynthesis of gold nanoparticles from a geranium leaf extract.

A rapid in situ biosynthesis of gold nanoparticles (AuNPs) is proposed in which a geranium (Pelargonium zonale) leaf extract was used as a non-toxic reducing and stabilizing agent in a sonocatalysis process based on high-power ultrasound. The synthesis process took only 3.5 min in aqueous solution under ambient conditions. The stability of the nanoparticles was studied by UV-Vis absorption spectroscopy with reference to the surface plasmon resonance (SPR) band. AuNPs have an average lifetime of about 8 weeks at 4 °C in the absence of light. The morphology and crystalline phase of the gold nanoparticles were characterized by transmission electron microscopy (TEM). The composition of the nanoparticles was evaluated by electron diffraction and X-ray energy dispersive spectroscopy (EDS). A total of 80% of the gold nanoparticles obtained in this way have a diameter in the range 8-20 nm, with an average size of 12±3 nm. Fourier transform infrared spectroscopy (FTIR) indicated the presence of biomolecules that could be responsible for reducing and capping the biosynthesized gold nanoparticles. A hypothesis concerning the type of organic molecules involved in this process is also given. Experimental design linked to the simplex method was used to optimize the experimental conditions for this green synthesis route. To the best of our knowledge, this is the first time that a high-power ultrasound-based sonocatalytic process and experimental design coupled to a simplex optimization process has been used in the biosynthesis of AuNPs.

Recent advances in graphite powder-based electrodes

Graphite powder-based electrodes have the electrochemical performance of quasi-noble metal electrodes with intrinsic advantages related to the possibility of modification to enhance selectivity and their easily renewable surface, with no need for hazardous acids or bases for their cleaning. In contrast with commercial electrodes, for example screen-printed or sputtered-chip electrodes, graphite powder-based electrodes can also be fabricated in any laboratory with the form and characteristics desired. They are also readily modified with advanced materials, with relatively high reproducibility. All these characteristics make them a very interesting option for obtaining a large variety of electrodes to resolve different kinds of analytical problems. This review summarizes the state-of-the-art, advantages, and disadvantages of graphite powder-based electrodes in electrochemical analysis in the 21st century. It includes recent trends in carbon paste electrodes, devoting special attention to the use of emergent materials as new binders and to the development of other composite electrodes. The most recent advances in the use of graphite powder-modified sol–gel electrodes are also described. The development of sonogel–carbon electrodes and their use in electrochemical sensors and biosensors is included. These materials extend the possibilities of applications, especially for industrial technology-transfer purposes, and their development could affect not only electroanalytical green chemistry but other interesting areas also, for example catalysis and energy conversion and storage.

Study of the Electrocatalytic Activity of Cerium Oxide and Gold-Studded Cerium Oxide Nanoparticles Using a Sonogel-Carbon Material as Supporting Electrode: Electroanalytical Study in Apple Juice for Babies

The present work reports a study of the electrocatalytic activity of CeO2 nanoparticles and gold sononanoparticles (AuSNPs)/CeO2 nanocomposite, deposited on the surface of a Sonogel-Carbon (SNGC) matrix used as supporting electrode and the application of the sensing devices built with them to the determination of ascorbic acid (AA) used as a benchmark analyte. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to investigate the electrocatalytic behavior of CeO2- and AuSNPs/CeO2-modified SNGC electrodes, utilizing different concentrations of CeO2 nanoparticles and different AuSNPs:CeO2 w/w ratios. The best detection and quantification limits, obtained for CeO2 (10.0 mg·mL−1)- and AuSNPs/CeO2 (3.25% w/w)-modified SNGC electrodes, were 1.59 × 10−6 and 5.32 × 10−6 M, and 2.93 × 10−6 and 9.77 × 10−6 M, respectively, with reproducibility values of 5.78% and 6.24%, respectively, for a linear concentration range from 1.5 μM to 4.0 mM of AA. The electrochemical devices were tested for the determination of AA in commercial apple juice for babies. The results were compared with those obtained by applying high performance liquid chromatography (HPLC) as a reference method. Recovery errors below 5% were obtained in most cases, with standard deviations lower than 3% for all the modified SNGC electrodes. Bare, CeO2- and AuSNPs/CeO2-modified SNGC electrodes were structurally characterized using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). AuSNPs and AuSNPs/CeO2 nanocomposite were characterized by UV-vis spectroscopy and X-ray diffraction (XRD), and information about their size distribution and shape was obtained by transmission electron microscopy (TEM;. The advantages of employing CeO2 nanoparticles and AuSNPs/CeO2 nanocomposite in SNGC supporting material are also described. This research suggests that the modified electrode can be a very promising voltammetric sensor for the determination of electroactive species of interest in real samples.

1-Furoylthiourea-Sonogel-Carbon electrodes: Structural and electrochemical characterization

A new type of sensor based on Sonogel-Carbon materials modified with 1-(2-furoyl)-3-(1-naphthyl)thiourea is presented to be used as an amperometric sensor for metals. Different percentages of modifier were tested in order to optimise the structural and mechanical properties, as well as the electrochemical behaviour. Scanning electron microscopy (SEM), X-ray energy dispersive spectroscopy (EDS), Fourier transform-infrared spectroscopy (FTIR), single crystal X-ray diffraction (XRD) and powder XRD were used for the structural characterization of these electrodes. The 1-(2-furoyl)-3-(1-naphthyl)thiourea did not modify significantly the structural and mechanical properties of the Sonogel-Carbon electrodes, being similar to other modifications carried out previously in these materials. For the study of the electrochemical response, anodic stripping differential pulse voltammetry (ASDPV) was employed, optimising other parameters of measurement such as pH of the buffer, potential and accumulation time and pulse amplitude. The electrochemical response of the modified electrodes improved significantly with respect to the non-modified electrode, giving good signals and acceptable detection limit.

Electrocatalytic and antifouling properties of CeO2-glassy carbon electrodes

Binary metal oxides with different degrees of covalent/ionic character of the oxygen-metal bond are tested as a partial coating of glassy carbon electrode surfaces. The electrocatalytic and antifouling properties of the resulting bicomponent electrode systems are analysed in view of possible applications in different fields of electrochemistry, such as electroremediation and electroanalysis. Based on the performance with respect to oxidation of ascorbic acid, as to sensitivity, repeatability of the responses, and activation of electrocatalytic oxidation, CeO2 has been preferred. This same electrode system has been further studied in respect to a trickier electrochemical process, namely the anodic oxidation of a chlorophenol derivative, which induces massive passivation of bare electrode surfaces. The effectiveness of the bicomponent electrode system in anodic oxidation of 2,4,6-trichlorophenol has been ascertained, over a wide range of concentrations, by comparison with pure glassy carbon surfaces.