Ignacio Naranjo-Rodriguez

Voltammetric determination of trace mercury at a sonogel-carbon electrode modified with poly-3-methylthiophene.

The sonogel-carbon electrode is a new class of sol-gel electrode that exhibit favourable mechanics and electrics properties to be used as electrochemical sensor. In this paper, a modified sonogel-carbon electrode is proposed to determine mercury at trace levels. The modified electrode is obtained by electropolymerization of 3-methylthiophene on the surface of a bare sonogel-carbon electrode. This electrode shows high selectivity and sensitivity and linear response towards Hg(II), with a detection limit of 1.4x10(-3)mgl(-1). The electrode is reusable by a simple chemical cleaning procedure. No deterioration was observed in the electrode response during at least 1 week of successive measurements.

Phenol biosensor based on Sonogel-Carbon transducer with tyrosinase alumina sol–gel immobilization

A new biosensor for detection of phenols, based on tyrosinase immobilization with alumina sol-gel on Sonogel-Carbon transducer, has been developed. The electrode was prepared using high energy ultrasounds directly applied to the precursors. The alumina sol-gel provided a microenvironment for retaining the native structure and activity of the entrapped enzyme and a very low mass transport barrier to the enzyme substrates. Phenols are oxidized by tyrosinase biosensor to form a detectable product, which was determined at -300 mV vs. Ag/AgCl reference electrode. For phenol, the sensor exhibited a fast response which resulted from the porous structure and high enzyme loading of the sol-gel matrix. The linear range was from 5 x 10(-7)M to 3 x 10(-5)M, with a detection limit of 3 x 10(-7)M. The stability of the biosensor was also evaluated.

Stripping voltammetry of silver ions at polythiophene-modified platinum electrodes.

The present work describes the development of a modified platinum electrode for stripping voltammetric determination of silver. The deposition of films based on electropolymerisation of the monomer thiophene was carried out by cycling the potential towards positive values between 0 and 1.6V. The preconcentration process of silver ions was initiated on the surface of the modified electrode by complexing silver with polythiophene (PTH) when a negative potential (-0.5V) was applied; then the reduced products was oxidized by means of differential pulse stripping voltammetry and the peak was observed at 0.17V. Parameters such as pH, supporting electrolyte and number of electropolymerisation cycles were studied. A linear relation between current peak and concentration of Ag(I) was obtained in the range 0.07-1.0mgL(-1). The detection limit for Ag(I) was evaluated to be 0.06mgL(-1). The reproducibility was tested carrying out 11 measurements at different electrodes and the relative standard deviation was 1.5%. The interference of several metals was investigated and showed negligible effect on the electrode response.

Electrochemical Study of 4-Nitrophenol at a Modified Carbon Paste Electrode

Abstract A zeolite-modified carbon paste electrode (CPE) has been used for the determination of 4-nitrophenol by differential pulse voltammetry (DPV). The electrochemical reduction of 4-nitrophenol at −1.0 V is carried out in a Britton-Robinson medium at pH 3.5. The cyclic voltammetric (CV) behaviour has been investigated to study the nature of the process. Studies on the effect of pH were carried out over the pH range 2–9 with the Britton-Robinson buffer solution, and the influence of pH on peak height and peak potential was analyzed. A linear relationship between peak intensity and concentration is obtained in the range 0.2–10 mg L−1, with a detection limit of 0.04 mg L−1; a relative standard deviation of 1.5% for a 5 mg L−1 4-nitrophenol concentration and a relative error of 2.6% were also obtained (n=11).

Multicomponent analysis of electrochemical signals in the wavelet domain

Successful applications of multivariate calibration in the field of electrochemistry have been recently reported, using various approaches such as multilinear regression (MLR), continuum regression, partial least squares regression (PLS) and artificial neural networks (ANN). Despite the good performance of these methods, it is nowadays accepted that they can benefit from data transformations aiming at removing baseline effects, reducing noise and compressing the data. In this context the wavelet transform seems a very promising tool. Here, we propose a methodology, based on the fast wavelet transform, for feature selection prior to calibration. As a benchmark, a data set consisting of lead and thallium mixtures measured by differential pulse anodic stripping voltammetry and giving seriously overlapped responses has been used. Three regression techniques are compared: MLR, PLS and ANN. Good predictive and effective models are obtained. Through inspection of the reconstructed signals, identification and interpretation of significant regions in the voltammograms are possible.

Alumina sol-gel/sonogel-carbon electrode based on acetylcholinesterase for detection of organophosphorus pesticides.

Two new amperometric biosensors based on immobilization of acetylcholinesterase on a sonogel-carbon electrode for detection of organophosphorous compounds are proposed. The electrodes were prepared applying high-energy ultrasounds directly to the precursors. The first biosensor was obtained by simple entrapping acetylcholinesterase in Al(2)O(3) sol-gel matrix on the sonogel-carbon. The second biosensor was produced in a sandwich configuration. Its preparation involved adsorption of the enzyme and modification via a polymeric membrane such as polyethylene glycol and the ion-exchanger Nafion. The optimal enzyme loading was found to be 0.7 mIU. Both biosensors showed optimal activity in 0.2 M phosphate buffer, pH 7.0, at an operating potential of 210 mV. The detection limit achieved for chlorpyriphos-ethyl-oxon was 2.5x10(-10)M at a 10-min incubation time.

Electrochemical behaviour of epinephrine and uric acid at a Sonogel―Carbon L-Cysteine modified electrode

The Sonogel-Carbon electrode is a special class of sol-gel electrode that exhibits favourable mechanic and electric properties to be used as electrochemical sensor. In this study, Sonogel-Carbon modified with L-Cysteine was used to prepare a novel electrochemical sensor. The objective of this novel electrode modification was to seek new electrochemical performances for detection of epinephrine in the presence of uric acid. The response of catalytic current with epinephrine concentration shows a linear relation in the range from 1 x 10(-7) to 5 x 10(-4)M with a correlation coefficient of 0.998, and a detection limit of 8.7 x 10(-8)M. The modified electrode had also been applied to the determination of epinephrine and uric acid in biological samples with satisfactory results. A surface characterisation of this modified electrode was carried out helped by scanning electron microscopy (SEM) and X-Ray energy dispersive spectroscopy (EDS).

New, fast and green procedure for the synthesis of gold nanoparticles based on sonocatalysis

An easy, cheap and green synthetic route, using high-power ultrasounds and sodium citrate dihydrate as non-toxic reducing and stabilizer agent, produces gold nanoparticles in aqueous solution, and at ambient conditions. The time required for the synthesis is 5.5 min. The spherical nanoparticles obtained by this route show a homogeneous size distribution, within the range 5-17 nm, with an average diameter of 10±1 nm. Moreover, 90% of the particles have a diameter ranging from 7 to 13 nm, and their half-life is more than 30 days. The gold nanoparticles synthesized following this route are known as sononanoparticles. Gold sononanoparticles have been characterized by TEM and XRD and their stability has been studied by UV-Vis spectroscopy. Alternative experimental designs are compared to optimize the proposed synthesis procedure.

Determination of wear metals in marine lubricating oils by microwave digestion and atomic absorption spectrometry

Abstract The difficulties associated with the development of a microwave-assisted acid digestion of lubricating oils in determination of wear metals are presented. The interest of this sample treatment lies in its basis for determining the total metal contents with enough sensitivity by flame atomic absorption spectrometry (FAAS). It allows earlier diagnosis of the engine state than is obtained by the widely applied simple dilution procedure. Another advantage is the avoidance of contamination and loss of the metals to be determined. The procedure employs nitric acid and hydrogen peroxide in a four-stage programme. Fe, Cu, Cr and Pb are determined by FAAS as representative of engine wear. The limits of detection are 0.1 μg/g for Fe and Cr and 0.05 μg/g for Cu and Pb. A comparison with other procedures is presented for spiked samples. Different types of used lubricating oils supplied by an oil company were analysed to prove the suitability of the procedure proposed.

Use of a Sonogel-Carbon electrode modified with bentonite for the determination of diazepam and chlordiazepoxide hydrochloride in tablets and their metabolite oxazepam in urine

Sonogel-Carbon electrode (SngCE) modified with bentonite (BENT) shows an interesting alternative electrode to be used in the determination of 1,4-benzodiazepines by square wave adsorptive cathodic stripping voltammetry (SWAdCSV). Diazepam (DZ) and chlordiazepoxide hydrochloride (CPZ), were determined using SngCE modified by 5% BENT. An electrochemical study of different parameters (such as pH, buffer type, ionic strength, accumulation potential, scan rate, and accumulation time) which affect the determination of DZ and CPZ is reported. Linear concentration ranges of 0.028-0.256 μg mL(-1) DZ (r=0.9997) and 0.034-0.302 μg mL(-1) CPZ (r=0.9997) are successfully obtained after an accumulation time of 60s. The quantification and detection limits were calculated to be 14.0 and 4.0 ng mL(-1) for DZ, and 16.0 and 5.0 ng mL(-1) for CPZ, respectively. The surface of the proposed electrode was characterized by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX). The developed method was applied to the analysis of commercially available tablets and human urine real samples. Analysis was performed with better precision, very low detection limits, and faster than previously reported voltammetric techniques.