Jaime J. Hernández

Confinement-Induced One-Dimensional Ferroelectric Polymer Arrays

This work demonstrates the use of wetting nanoporous alumina template with polymer solution to produce arrays of isolated poly(vinylidene fluoride) (PVDF) ferroelectric gamma-type nanorods supported within a nonpolar alpha-structure film. The method is based upon a crystal phase transition which occurs due to PVDF confinement within alumina nanoporous. The system was studied using scanning X-ray microdiffraction (micro-XRD) that allows the solid-solid phase transition from the alpha-nonpolar crystal form (bulk) to the gamma polar ferroelectric form (nanorod array) to be spatially resolved, as well as providing crystallinity and orientation information. The results reveal that the interaction between polymer chains and the porous membranes walls imposes a flat-on lamella growth along the nanorrods long axis, while improving crystal orientation.

Assessment and formation mechanism of laser-induced periodic surface structures on polymer spin-coated films in real and reciprocal space.

In this work we evaluate the potential of grazing incidence X-ray scattering techniques in the investigation of laser-induced periodic surface structures (LIPSSs) in a series of strongly absorbing model spin-coated polymer films which are amorphous, such as poly(ethylene terephthalate), poly(trimethylene terephthalate), and poly(carbonate bisphenol A), and in a weaker absorbing polymer, such as semicrystalline poly(vinylidene fluoride), over a narrow range of fluences. Irradiation was performed with pulses of 6 ns at 266 nm, and LIPSSs with period lengths similar to the laser wavelength and parallel to the laser polarization direction are formed by devitrification of the film surface at temperatures above the characteristic glass transition temperature of the polymers. No crystallization of the surface is induced by laser irradiation, and crystallinity of the material prevents LIPSS formation. The structural information obtained by both atomic force microscopy and grazing incidence small-angle X-ray scattering (GISAXS) correlates satisfactorily. Comparison of experimental and simulated GISAXS patterns suggests that LIPSSs can be well described considering a quasi-one-dimensional paracrystalline lattice and that irradiation parameters have an influence on the order of such a lattice.

Correlation lengths, porosity and water adsorption in TiO 2 thin films prepared by glancing angle deposition

This paper reports a thorough microstructural characterization of glancing angle deposited (GLAD) TiO(2) thin films. Atomic force microscopy (afm), grazing-incidence small-angle x-ray scattering (GISAXS) and water adsorption isotherms have been used to determine the evolution of porosity and the existence of some correlation distances between the nanocolumns constituting the basic elements of the films nanostructure. It is found that the deposition angle and, to a lesser extent, the film thickness are the most important parameters controlling properties of the thin film. The importance of porosity and some critical dimensions encountered in the investigated GLAD thin films is highlighted in relation to the analysis of their optical properties when utilized as antireflective coatings or as hosts and templates for the development of new composite materials.

High-resolution thermal imaging with a combination of nano-focus X-ray diffraction and ultra-fast chip calorimetry

A microelectromechanical-systems-based calorimeter designed for use on a synchrotron nano-focused X-ray beamline is described. This instrument allows quantitative DC and AC calorimetric measurements over a broad range of heating/cooling rates (≤100000 K s(-1)) and temperature modulation frequencies (≤1 kHz). The calorimeter was used for high-resolution thermal imaging of nanogram-sized samples subjected to X-ray-induced heating. For a 46 ng indium particle, the measured temperature rise reaches ∼0.2 K, and is directly correlated to the X-ray absorption. Thermal imaging can be useful for studies of heterogeneous materials exhibiting physical and/or chemical transformations. Moreover, the technique can be extended to three-dimensional thermal nanotomography.

Light-Switchable Vesicles from Liquid-Crystalline Homopolymer–Surfactant Complexes†

Polymer vesicles, or polymersomes, attract increasingly growing interest due to the various applications ranging from cosmetics to drug delivery. At DWI a novel concept of polymersome fabrication based on non-stoichiometric complexation of a polybase with an amphiphilic ligand bearing a sulfonic acid group has been developed. The structure of the complex in the vesicles was found to be similar to that in the bulk, where polymer backbones are sandwiched between the bilayers formed by the ligand molecules. In contrast to conventional polymersomes formed by block-copolymers, the polymer backbones in the vesicle walls are largely parallel to the surface. This can contribute to their high mechanical stability. The large amount of remaining free binding sites in this system makes it possible to additionally incorporate different functional molecules into the vesicles. Furthermore, the collapse of the polymersome can be induced by UV-irradiation due to the trans-to-cis transition of the azo-groups, which leads to the isotropization of the layered structure. This feature could make this system promising for the controlled delivery applications.

Structure and Morphology of Thin Films of Linear Aliphatic Polyesters Prepared by Spin-Coating

Thin films, with thicknesses from 10 to 400 nm of linear aliphatic polyesters (X, Y), based on propylenediol (X = 3) and on dicarboxylic acid of different chain length (Y = 2, 3, and 4 CH(2) units) were prepared by spin coating of CHCl(3) polymer solutions with different polymer concentrations. Morphology and structure of the spin coated thin films were investigated by atomic force microscopy (AFM) and by grazing incidence X-ray scattering techniques at small, (GISAXS) and wide angles (GIWAXS). AFM revealed a strong dewetting for all three polymers for coatings thinner than 100 nm. The polymer films are clearly semicrystalline for thicknesses higher than 50 nm. GIWAXS of the thicker films revealed their oriented crystalline nature. An edge-on-lamellae morphology is clearly shown by the AFM-phase images even for relatively thin films. SAXS with the beam parallel to the sample plane also support the presence of lamellae perpendicular to the substrate. The use of a mu-beam helped to interpret the GIWAXS patterns and allowed to obtain oriented WAXS patterns from melt solidified filaments. Thus, a crystal chain packing is proposed for the three polymers and consequently the indexing of the observed reflections. Accordingly, the polymer chains lie parallel to the substrate being the bc plane of the monoclinic crystal unit cell parallel to the substrate.

Understanding crystallization features of P(VDF-TrFE) copolymers under confinement to optimize ferroelectricity in nanostructures

The successful development of ferroelectric polymer devices depends on the effective fabrication of polar ferroelectric crystalline nanostructures. We demonstrate, by scanning X-ray microdiffraction using synchrotron light, the heterogeneous character of high aspect ratio one-dimensional nanoarrays of poly(vinylidene fluoride-co-trifluoroethylene) copolymers supported by a residual polymer film. They were prepared by melt and solution template wetting, using porous anodic aluminum oxide as a template. The spatial evolution of different polymorphs from the mixture of paraelectric and ferroelectric crystal forms (residual film) to the pure ferroelectric form (nanoarray) is evidenced for the samples prepared by solution wetting. However, for samples prepared by melt wetting the ferroelectric phase is exclusively obtained in both the residual film and nanoarray. The crystal nuclei formed in the polymer film connected to the nanoarray play a key role in determining the formation of a crystallinity distribution gradient, where the crystallinity decreases along the first 5-10 microns in the nanorods reaching a steady value afterwards. The minimum decrease in crystallinity is revealed for samples prepared by melt wetting. The results reported in this work endeavour to enhance the understanding of crystallization under confinement for ferroelectric copolymers and reveal the parameters for improving the ferroelectric character of polymer nanostructures.

Crystallization under One-Dimensional Confinement in Alumina Nanopores of Poly(trimethylene terephthalate) and Its Composites with Single Wall Carbon Nanotubes

We report the preparation of semicrystalline polymer nanorods of PTT and of its nanocomposites with SWCNTs by infiltration of the molten polymer into disordered anodic alumina membranes. An accurate study of the crystalline orientation of these systems has been accomplished by means of X-ray microdiffraction. While polymer residual film exhibits isotropic character, edge-on lamellae are formed upon approaching the polymer/membrane interface. This effect might be due to the elongational flow that takes place in the molten state as polymer chains infiltrate the AAO membrane. At the interface, edge-on and flat-on crystalline lamellae coexist as a consequence of the strong interaction between the polymer and the AAO surface. Inside the nanopores, the confined environment induces a kinetic selection of polymer crystals which only allows the growth of crystalline lamellae with its a-axis parallel to that of the pore. In the case of PTT/SWCNT nanocomposites, this effect, in conjunction with the strong interaction between polymer and AAO surface, seems to prevail over the templating effect of the carbon nanotubes and a similar orientation to that of the neat PTT case is observed.

Humidity-Modulated Phase Control and Nanoscopic Transport in Supramolecular Assemblies

Supramolecular assembly allows for enhanced control of bulk material properties through the fine modulation of intermolecular interactions. We present a comprehensive study of a cross-linkable amphiphilic wedge molecule based on a sulfonated trialkoxybenzene with a sodium counterion that forms liquid crystalline (LC) phases with ionic nanochannel structures. This compound exhibits drastic structural changes as a function of relative humidity (RH). Our combined structural, dynamical, and transport studies reveal deep and novel information on the coupling of water and wedge molecule transport to structural motifs, including the significant influence of domain boundaries within the material. Over a range of RH values, we employ (23)Na solid-state NMR on the counterions to complement detailed structural studies by grazing-incidence small-angle X-ray scattering. RH-dependent pulsed-field-gradient (PFG) NMR diffusion studies on both water and the wedge amphiphiles show multiple components, corresponding to species diffusing within LC domains as well as in the domain boundaries that compose 10% of the material. The rich transport and dynamical behaviors described here represent an important window into the world of supramolecular soft materials, carrying implications for optimization of these materials in many venues. Cubic phases present at high RH show fast transport of water (2 × 10(-10) m(2)/s), competitive with that observed in benchmark polymeric ion conductors. Understanding the self-assembly of these supramolecular building blocks shows promise for generating cross-linked membranes with fast ion conduction for applications such as next-generation batteries.

Structure of Glancing Incidence Deposited TiO2 Thin Films as Revealed by Grazing Incidence Small-Angle X-ray Scattering

For the first time, grazing incidence small-angle X-ray scattering (GISAXS) analysis is used to characterize the morphology of TiO(2) thin films grown by glancing angle physical vapor deposition (GLAD). According to cross-section scanning electron microscopy (SEM) images, the films consist of near isotilted TiO(2) columns of different length and width depending on film thickness. The obtained GISAXS patterns show a characteristic asymmetry with respect to the incidence plane, which is associated with the tilted geometry of the TiO(2) columns. The patterns also show the existence of two populations of columns in these GLAD-TiO(2) films. The population of the thinnest columns appears related to the first grown layer and is common for all the films investigated, while the second population of columns grows with the thickness of the films and has been related to wider columns formed by shadowing at the expense of the initially formed columns.