Jan Berton

Electrolytic membrane extraction enables production of fine chemicals from biorefinery sidestreams

Short-chain carboxylates such as acetate are easily produced through mixed culture fermentation of many biological waste streams, although routinely digested to biogas and combusted rather than harvested. We developed a pipeline to extract and upgrade short-chain carboxylates to esters via membrane electrolysis and biphasic esterification. Carboxylate-rich broths are electrolyzed in a cathodic chamber from which anions flux across an anion exchange membrane into an anodic chamber, resulting in a clean acid concentrate with neither solids nor biomass. Next, the aqueous carboxylic acid concentrate reacts with added alcohol in a water-excluding phase to generate volatile esters. In a batch extraction, 96 ± 1.6% of the total acetate was extracted in 48 h from biorefinery thin stillage (5 g L(-1) acetate) at 379 g m(-2) d(-1) (36% Coulombic efficiency). With continuously regenerated thin stillage, the anolyte was concentrated to 14 g/L acetic acid, and converted at 2.64 g (acetate) L(-1) h(-1) in the first hour to ethyl acetate by the addition of excess ethanol and heating to 70 °C, with a final total conversion of 58 ± 3%. This processing pipeline enables direct production of fine chemicals following undefined mixed culture fermentation, embedding carbon in industrial chemicals rather than returning them to the atmosphere as carbon dioxide.

pH-triggered formation of nanoribbons from yeast-derived glycolipid biosurfactants

In the present paper, we show that the saturated form of acidic sophorolipids, a family of industrially scaled bolaform microbial glycolipids, unexpectedly forms chiral nanofibers only at pH below 7.5. In particular, we illustrate that this phenomenon derives from a subtle cooperative effect of molecular chirality, hydrogen bonding, van der Waals forces and steric hindrance. The pH-responsive behaviour was shown by Dynamic Light Scattering (DLS), pH-titration and Field Emission Scanning Electron Microscopy (FE-SEM) while the nanoscale chirality was evidenced by Circular Dichroism (CD) and cryo Transmission Electron Microscopy (cryo-TEM). The packing of sophorolipids within the ribbons was studied using Small Angle Neutron Scattering (SANS), Wide Angle X-ray Scattering (WAXS) and 2D (1)H-(1)H through-space correlations via Nuclear Magnetic Resonance under very fast (67 kHz) Magic Angle Spinning (MAS-NMR).

Self-Assembly Mechanism of pH-Responsive Glycolipids: Micelles, Fibers, Vesicles, and Bilayers

A set of four structurally related glycolipids are described: two of them have one glucose unit connected to either stearic or oleic acid, and two other ones have a diglucose headgroup (sophorose) similarly connected to either stearic or oleic acid. The self-assembly properties of these compounds, poorly known, are important to know due to their use in various fields of application from cleaning to cosmetics to medical. At basic pH, they all form mainly small micellar aggregates. At acidic pH, the oleic and stearic derivatives of the monoglucose form, respectively, vesicles and bilayer, while the same derivatives of the sophorose headgroup form micelles and twisted ribbons. We use pH-resolved in situ small angle X-ray scattering (SAXS) under synchrotron radiation to characterize the pH-dependent mechanism of evolution from micelles to the more complex aggregates at acidic pH. By pointing out the importance of the COO-/COOH ratio, the melting temperature, Tm, of the lipid moieties, hydration of the glycosidic headgroup, the packing parameter, membrane rigidity, and edge stabilization, we are now able to draw a precise picture of the full self-assembly mechanism. This work is a didactical illustration of the complexity of the self-assembly process of a stimuli-responsive amphiphile during which many concomitant parameters play a key role at different stages of the process.

3-Imidoallenylphosphonates: In Situ Formation and β-Alkoxylation

3-Imidoallenylphosphonates, allenes bearing both an electron-withdrawing and -donating group, were isolated for the first time. An alkoxy substituent was introduced into these unprecedented intermediates in a one-pot approach, yielding β-functionalized aminophosphonates in excellent yields and short reaction times. The mechanistic insights gained are important additions to the domain of allene chemistry. Addition of biologically important molecules, including monoglycerides, amino acids, and nucleosides, proves the general applicability of the developed method.

Extraction and Esterification of Low‐Titer Short‐Chain Volatile Fatty Acids from Anaerobic Fermentation with Ionic Liquids

Ionic liquids can both act as a solvent and mediate esterification to valorize low-titer volatile fatty acids and generate organic solvents from renewable carbon sources including biowaste and CO2 . In this study, four phosphonium ionic liquids were tested for single-stage extraction of acetic acid from a dilute stream and esterification to ethyl acetate with added ethanol and heat. The esterification proceeded with a maximum conversion of 85.9±1.3 % after 30 min at 75 °C at a 1:1 stoichiometric ratio of reactants. Extraction and esterification can be tailored using mixed-anion ionic liquids; this is demonstrated herein using a common trihexyl(tetradecyl)phosphonium cation and a mixed chloride and bis(trifluoromethylsulfonyl)imide anion ionic liquid. As a further proof-of-concept, ethyl acetate was generated from an ionic liquid-driven esterification of an acetic acid extractant generated using CO2 as the only carbon source by microbial electrosynthesis.

Synthesis of Uniform, Monodisperse, Sophorolipid Twisted Ribbons

Control over size monodispersity in chiral self-assembled systems is important for potential applications like templating, tissue engineering or enantioselective chromatography, just to cite a few examples. In this context, it was reported that the saturated form of sophorolipids (SL), a bioderived glycolipid, are able to form self-assembled twisted ribbons in water at neutral pH. Here, we show the possibility to control their size dispersion, generally between 10 and 40 nm after synthesis to a value of 13.5±1.5 nm, by a simple dialysis step eliminating the excess of NaCl. We use transmission electron microscopy under cryogenic conditions (cryo-TEM) combined with small angle neutron scattering (SANS) to characterize the ribbon dispersion both visually and statistically. Two negative controls show the importance of salt in the aggregation process of the ribbons.

Nanoscale Platelet Formation by Monounsaturated and Saturated Sophorolipids under Basic pH Conditions.

The self-assembly behavior of the yeast-derived bolaamphiphile sophorolipid (SL) is generally studied under acidic/neutral pH conditions, at which micellar and fibrillar aggregates are commonly found, according to the (un)saturation of the aliphatic chain: the cis form, which corresponds to the oleic acid form of SL, spontaneously forms micelles, whereas the saturated form, which corresponds to the stearic acid form of SL, preferentially forms chiral fibers. By using small-angle light and X-ray scattering (SLS, SAXS) combined with high-sensitivity transmission electron microscopy imaging under cryogenic conditions (cryo-TEM), the nature of the self-assembled structures formed by these two compounds above pH 10, which is the pH at which they are negatively charged due to the presence of a carboxylate group, has been explored. Under these conditions, these compounds self-assemble into nanoscale platelets, despite the different molecular structures. This work shows that the electrostatic repulsion forces generated by COO(-) mainly drive the self-assembly process at basic pH, in contrast with that found at pH below neutrality, at which self-assembly is driven by van der Waals forces and hydrogen bonding, and thus, is in agreement with previous findings on carbohydrate-based gemini surfactants.

Biocidal Properties of a Glycosylated Surface: Sophorolipids on Au(111)

Classical antibacterial surfaces usually involve antiadhesive and/or biocidal strategies. Glycosylated surfaces are usually used to prevent biofilm formation via antiadhesive mechanisms. We report here the first example of a glycosylated surface with biocidal properties created by the covalent grafting of sophorolipids (a sophorose unit linked by a glycosidic bond to an oleic acid) through a self-assembled monolayer (SAM) of short aminothiols on gold (111) surfaces. The biocidal effect of such surfaces on Gram+ bacteria was assessed by a wide combination of techniques including microscopy observations, fluorescent staining, and bacterial growth tests. About 50% of the bacteria are killed via alteration of the cell envelope. In addition, the roles of the sophorose unit and aliphatic chain configuration are highlighted by the lack of activity of substrates modified, respectively, with sophorose-free oleic acid and sophorolipid-derivative having a saturated aliphatic chain. This system demonstrates thus the direct implication of a carbohydrate in the destabilization and disruption of the bacterial cell envelope.

Fifty years of (benz)oxaphospholene chemistry

The first synthesis of benzoxaphospholenes dates back to the 1960s. Since then, the structural variety of reported (benz)oxaphospholenes has steadily increased. Organophosphorus compounds have caught the interest of synthetic chemists for a couple of decades now because of their interesting biological properties. Oxaphospholenes, in particular, could serve as carbohydrate mimetics, and benzoxaphospholenes have been reported to possess bactericidal, insecticidal, herbicidal, and fungistatical properties. Transesterification reactions and addition of phosphorus nucleophiles to carbonyl compounds were reaction types that led to the production of the first (benz)oxaphospholenes. When it was discovered that allenylphosphonates could easily be obtained from propargyl alcohols and dialkyl halophosphites, the electrophile-induced cyclization reaction of these allenylphosphonate precursors resulted in a huge boom in the amount of reports on oxaphospholene synthesis. To this day, this method is still frequently used. Ring-closing metathesis and Horner-Wadsworth-Emmons reactions have also proven their potential for the preparation of oxaphospholenes. In recent years, Pd, Rh and Au-catalysis have made their entry, generating (benz)oxaphospholenes from a wide variety of simple substrates. A couple of miscellaneous methods are summarized at the end of the Review.

Three-Step Synthesis of Chiral Spirocyclic Oxaphospholenes

Chiral spirocylic oxaphospholenes were prepared in a three-step sequence from chiral pool terpenoid ketones. After addition of a metal acetylide, the resulting propargyl alcohols were converted stereoselectively into their allenylphosphonate counterparts. In the last step, they were conveniently cyclized into spirooxaphospholenes with one equivalent of iodine without purification. When starting from sterically hindered terpenes, allenylphosphonates were also easily obtained but showed to be unreactive or rearranged under these cyclization conditions.