Jana Kukutschová

Preparation and characterization of photoactive composite kaolinite/TiO2

Preparation of nanocomposite kaolinite/TiO(2), using hydrolysis of titanyl sulfate in the presence of kaolin was addressed. A variable (kaolin)/(titanyl sulfate) ratio has been used in order to achieve the desired TiO(2) content in prepared nanocomposites. Calcination of the composites at 600 °C led to the transformation of the kaolinite to metakaolinite and to origination of metakaolinite/TiO(2) composites. The prepared samples were investigated using X-ray fluorescence spectroscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetry and diffuse reflectance spectroscopy in the UV-VIS region. Structural ordering of TiO(2) on the kaolinite particle surface was modeled using empirical force field atomistic simulations in the Material Studio modeling environment. Photodegradation activity of the composites prepared was evaluated by the discoloration of Acid Orange 7 aqueous solution.

Oxidative stress markers are elevated in exhaled breath condensate of workers exposed to nanoparticles during iron oxide pigment production

Markers of oxidative stress and inflammation were analysed in the exhaled breath condensate (EBC) and urine samples of 14 workers (mean age 43  ±  7 years) exposed to iron oxide aerosol for an average of 10  ±  4 years and 14 controls (mean age 39  ±  4 years) by liquid chromatography-electrospray ionization-mass spectrometry/mass spectrometry (LC-ESI-MS/MS) after solid-phase extraction. Aerosol exposure in the workplace was measured by particle size spectrometers, a scanning mobility particle sizer (SMPS) and an aerodynamic particle sizer (APS), and by aerosol concentration monitors, P-TRAK and DustTRAK DRX. Total aerosol concentrations in workplace locations varied greatly in both time and space. The median mass concentration was 0.083 mg m(-3) (IQR 0.063-0.133 mg m(-3)) and the median particle concentration was 66 800 particles cm(-3) (IQR 16,900-86,900 particles cm(-3)). In addition, more than 80% of particles were smaller than 100 nm in diameter. Markers of oxidative stress, malondialdehyde (MDA), 4-hydroxy-trans-hexenale (HHE), 4-hydroxy-trans-nonenale (HNE), 8-isoProstaglandin F2α (8-isoprostane) and aldehydes C6-C12, in addition to markers of nucleic acid oxidation, including 8-hydroxy-2-deoxyguanosine (8-OHdG), 8-hydroxyguanosine (8-OHG), 5-hydroxymethyl uracil (5-OHMeU), and of proteins, such as o-tyrosine (o-Tyr), 3-chlorotyrosine (3-ClTyr), and 3-nitrotyrosine (3-NOTyr) were analysed in EBC and urine by LC-ESI-MS/MS. Almost all markers of lipid, nucleic acid and protein oxidation were elevated in the EBC of workers comparing with control subjects. Elevated markers were MDA, HNE, HHE, C6-C10, 8-isoprostane, 8-OHdG, 8-OHG, 5-OHMeU, 3-ClTyr, 3-NOTyr, o-Tyr (all p  <  0.001), and C11 (p  <  0.05). Only aldehyde C12 and the pH of samples did not differ between groups. Markers in urine were not elevated. These findings suggest the adverse effects of nano iron oxide aerosol exposure and support the utility of oxidative stress biomarkers in EBC. The analysis of urine oxidative stress biomarkers does not support the presence of systemic oxidative stress in iron oxide pigment production workers.

Antibacterial activity of kaolinite/nanoTiO2 composites in relation to irradiation time.

The paper addresses laboratory preparation and antibacterial activity testing of kaolinite/nanoTiO2 composite in respect of the daylight irradiation time. Kaolinite/nanoTiO2 composites with 20 and 40 wt% of TiO2 were laboratory prepared, dried at 105 °C and calcined at 600 °C. The calcination caused transformation of kaolinite to metakaolinite and origination of the metakaolinite/nanoTiO2 composite. X-ray powder diffraction, Raman and FTIR spectroscopic methods revealed titanium dioxide only in the form of anatase in all evaluated samples (non-calcined and calcined) and also transformation of kaolinite to metakaolinite after the calcination treatment. Scanning electron microscopy was used as a method for characterization of morphology and elemental composition of the studied samples. A standard microdilution test was used to determine the antibacterial activity using four human pathogenic bacterial strains (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, Pseudomonas aeruginosa). A lamp with a wide spectrum bulb simulating daylight was used for induction of photocatalysis. The antibacterial assays found all the KATI samples to have antibacterial potency with different onset of the activity when calcined samples exhibited antibacterial activity earlier than the non-calcined. Significant difference in antibacterial activity of KATI samples for different bacterial strains was not observed.

Preparation, characterization and antibacterial properties of ZnO/kaoline nanocomposites

This paper describes laboratory preparation, characterization and antibacterial activity testing of ZnO/kaoline composites. ZnO/kaoline composites with 50 wt.% of ZnO were laboratory prepared, dried at 105 °C and calcined at 500 °C. XRPD analysis revealed that thermal treatment caused the phase transformation of Zn containing precursor into ZnO. Scanning and transmission electron microscopy techniques were used for characterization of morphology of the prepared samples. A standard microdilution test was used for evaluation of antibacterial activity using four common human pathogens (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa). Daylight was used for induction photocatalytically based antibacterial activity. Second possible explanation of antibacterial activity of ZnO/kaoline could be the presence of biologically available forms of zinc. During the antibacterial activity assays the ZnO/kaoline composites exhibited antibacterial activity, where differences in an onset of the antibacterial activity and activity against bacterial strains were observed. The highest antibacterial activity was observed against S. aureus, where the lowest value of minimum inhibitory concentration was determined equal to 0.41 mg/ml.

Nanostructured composite material graphite/TiO2 and its antibacterial activity under visible light irradiation

The paper addresses laboratory preparation, characterization and in vitro evaluation of antibacterial activity of graphite/TiO2 nanocomposites. Composites graphite/TiO2 with various ratio of TiO2 nanoparticles (30wt.%, and 50wt.%) to graphite were prepared using a thermal hydrolysis of titanylsulfate in the presence of graphite particles, and subsequently dried at 80°C. X-ray powder diffraction, transmission electron microscopy and Raman microspectroscopy served as phase-analytical methods distinguishing anatase and rutile phases in the prepared composites. Scanning and transmission electron microscopy techniques were used for characterization of morphology of the prepared samples. A developed modification of the standard microdilution test was used for in vitro evaluation of daylight induced antibacterial activity, using four common human pathogenic bacterial strains (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa). Antibacterial activity of the graphite/TiO2 nanocomposites could be based mainly on photocatalytic reaction with subsequent potential interaction of reactive oxygen species with bacterial cells. During the antibacterial activity experiments, the graphite/TiO2 nanocomposites exhibited antibacterial activity, where differences in the onset of activity and activity against bacterial strains were observed. The highest antibacterial activity evaluated as minimum inhibitory concentration was observed against P. aeruginosa after 180min of irradiation.

ZnO/graphite composites and its antibacterial activity at different conditions

The paper reports laboratory preparation, characterization and in vitro evaluation of antibacterial activity of ZnO/graphite nanocomposites. Zinc chloride and sodium carbonate served as precursors for synthesis of zinc oxide, while micromilled and natural graphite were used as the matrix for ZnO nanoparticles anchoring. During the reaction of ZnCl2 with saturated aqueous solution of Na2CO3a new compound is created. During the calcination at the temperature of 500 °C this new precursors decomposes and ZnO nanoparticles are formed. Composites ZnO/graphite with 50 wt.% of ZnO particles were prepared. X-ray powder diffraction and Raman microspectroscopy served as phase-analytical methods. Scanning electron microscopy technique was used for morphology characterization of the prepared samples and EDS mapping for visualization of elemental distribution. A developed modification of the standard microdilution test was used for in vitro evaluation of daylight induced antibacterial activity and antibacterial activity at dark conditions. Common human pathogens served as microorganism for antibacterial assay. Antibacterial activity of ZnO/graphite composites could be based on photocatalytic reaction; however there is a role of Zn(2+) ions on the resulting antibacterial activity which proved the experiments in dark condition. There is synergistic effect between Zn(2+) caused and reactive oxygen species caused antibacterial activity.

Iron-based granules in body of bumblebees

The paper deals with the presence of iron-based granules in body parts of bumblebees. Two groups of bumblebees were collected from their natural habitat, industrial landscape, and from a breeding station. Detection of the magnetic particles was performed by a vibratory magnetometer and their morphology and elemental composition was analysed by scanning electron microscopy with EDX microanalysis. By means of the EDX spectra, wild bumblebees were found to have many magnetic and non-magnetic particles on their body, containing Fe, O, Al, Si, Bi, Mg, K, and Ni, likely having origin in the industrial pollution of the environment. In the case of bred bumblebees the presence of iron-rich granules, which occurred more abundantly in subsurface tissues on the head and wings, was observed. Phase analysis based on X-ray diffraction shows that iron-based granules contain magnetite and wuestite and Mössbauer spectroscopy admits a superparamagnetic form of these minerals. Magnetoreception, i.e. the sensory function of these granules, is discussed within the paper.

Effects of walnut shells on friction and wear performance of eco-friendly brake friction composites

The paper addresses utilization of 0–14.6 vol.% alkaline-treated walnut shell powders (WSPs) as a functional filler in the proposed eco-friendly brake friction materials. Five non-asbestos friction material samples containing WSP and jute fibers from biomass as biodegradable components were prepared, also including several from natural resources, such as wollastonite, basalt fibers, zircon, barite, and vermiculite. The friction-wear properties of the prepared composites were tested by using Chase friction performance testing device. Furthermore, an extension evaluation method was introduced to rank the composites based on their overall friction-wear characteristics. The coefficient of friction (COF) and wear rate of the samples could be effectively improved, especially for the sample with a WSP content ≤5.6 vol.%. With confirmation of the analysis and characterization results, chars were very possibly formed by the degradation of organic ingredients, such as WSP and jute fibers, which played a key role in affecting the friction performance of the friction composites.

Possible role of nano-sized particles in chronic tonsillitis and tonsillar carcinoma: a pilot study

This study aimed to evaluate the palatine tonsils of patients with chronic tonsillitis and spinocellular carcinoma to determine the presence of nano-sized particles. Tonsil samples from adult patients with chronic tonsillitis and spinocellular carcinoma of the palatine tonsil were dried and analyzed using a scanning electron microscope with the X-ray microprobe of an energy-dispersive spectroscope. Demographic data and smoking histories were obtained. The principal metals found in almost all tissues analyzed were iron, chromium, nickel, aluminum, zinc, and copper. No significant difference in elemental composition was found between the group of patients with chronic tonsillitis and the group with spinocellular carcinoma of the palatine tonsil. Likewise, no significant difference was found between the group of smokers and the group of nonsmokers. The presence of various micro- and nano-sized metallic particles in human tonsils was confirmed. These particles may potentially cause an inflammatory response as well as neoplastic changes in human palatine tonsils similar to those occurring in the lungs. Further and more detailed studies addressing this issue, including studies designed to determine the chemical form of the metals detected, studies devoted to quantitative analysis, biokinetics, and to the degradation and elimination of nanoparticles are needed for a more detailed prediction of the relation between the diagnosis and the presence of specific metal nanoparticles in tonsillar tissue.

Metal-based particles in human amniotic fluids of fetuses with normal karyotype and congenital malformation—a pilot study

This study explores the inorganic composition of amniotic fluid in healthy human fetuses and fetuses with congenital malformation with a special attention to presence of metal-based solid particles. Amniotic fluid originates from maternal blood and provides fetus mechanical protection and nutrients. In spite of this crucial role, the environmental impact on the composition of amniotic fluid remains poorly studied. The samples of human amniotic fluids were obtained by amniocentesis, including both healthy pregnancies and those with congenital malformations. The samples were analysed using several techniques, including Raman microspectroscopy, scanning electron microscopy with energy-dispersed spectrometry (SEM-EDS), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. Several metal-based particles containing barium, titanium, iron, and other elements were detected by SEM-EDS and Raman microspectroscopy. XRD analysis detected only sodium chloride as the main component of all amniotic fluid samples. Infrared spectroscopy detected protein-like organic components. Majority of particles were in form of agglomerates up to tens of micrometres in size, consisting of mainly submicron particles. By statistical analysis (multiple correspondence analysis), it was observed that groups of healthy and diagnosed fetuses form two separate groups and therefore, qualitative differences in chemical composition may have distinct biological impact. Overall, our results suggest that metal-based nanosized pollutants penetrate into the amniotic fluid and may affect human fetuses.