Pavlína Peikertová

Antibacterial activity of kaolinite/nanoTiO2 composites in relation to irradiation time.

The paper addresses laboratory preparation and antibacterial activity testing of kaolinite/nanoTiO2 composite in respect of the daylight irradiation time. Kaolinite/nanoTiO2 composites with 20 and 40 wt% of TiO2 were laboratory prepared, dried at 105 °C and calcined at 600 °C. The calcination caused transformation of kaolinite to metakaolinite and origination of the metakaolinite/nanoTiO2 composite. X-ray powder diffraction, Raman and FTIR spectroscopic methods revealed titanium dioxide only in the form of anatase in all evaluated samples (non-calcined and calcined) and also transformation of kaolinite to metakaolinite after the calcination treatment. Scanning electron microscopy was used as a method for characterization of morphology and elemental composition of the studied samples. A standard microdilution test was used to determine the antibacterial activity using four human pathogenic bacterial strains (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis, Pseudomonas aeruginosa). A lamp with a wide spectrum bulb simulating daylight was used for induction of photocatalysis. The antibacterial assays found all the KATI samples to have antibacterial potency with different onset of the activity when calcined samples exhibited antibacterial activity earlier than the non-calcined. Significant difference in antibacterial activity of KATI samples for different bacterial strains was not observed.

Preparation of Risedronate Nanoparticles by Solvent Evaporation Technique

One approach for the enhancement of oral drug bioavailability is the technique of nanoparticle preparation. Risedronate sodium (Biopharmaceutical Classification System Class III) was chosen as a model compound with high water solubility and low intestinal permeability. Eighteen samples of risedronate sodium were prepared by the solvent evaporation technique with sodium dodecyl sulfate, polysorbate, macrogol, sodium carboxymethyl cellulose and sodium carboxymethyl dextran as nanoparticle stabilizers applied in three concentrations. The prepared samples were characterized by dynamic light scattering and scanning electron microscopy. Fourier transform mid-infrared spectroscopy was used for verification of the composition of the samples. The particle size of sixteen samples was less than 200 nm. Polysorbate, sodium carboxymethyl dextran and macrogol were determined as the most favourable excipients; the particle size of the samples of risedronate with these excipients ranged from 2.8 to 10.5 nm.

Preparation, characterization and antibacterial properties of ZnO/kaoline nanocomposites

This paper describes laboratory preparation, characterization and antibacterial activity testing of ZnO/kaoline composites. ZnO/kaoline composites with 50 wt.% of ZnO were laboratory prepared, dried at 105 °C and calcined at 500 °C. XRPD analysis revealed that thermal treatment caused the phase transformation of Zn containing precursor into ZnO. Scanning and transmission electron microscopy techniques were used for characterization of morphology of the prepared samples. A standard microdilution test was used for evaluation of antibacterial activity using four common human pathogens (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa). Daylight was used for induction photocatalytically based antibacterial activity. Second possible explanation of antibacterial activity of ZnO/kaoline could be the presence of biologically available forms of zinc. During the antibacterial activity assays the ZnO/kaoline composites exhibited antibacterial activity, where differences in an onset of the antibacterial activity and activity against bacterial strains were observed. The highest antibacterial activity was observed against S. aureus, where the lowest value of minimum inhibitory concentration was determined equal to 0.41 mg/ml.

Nanostructured composite material graphite/TiO2 and its antibacterial activity under visible light irradiation

The paper addresses laboratory preparation, characterization and in vitro evaluation of antibacterial activity of graphite/TiO2 nanocomposites. Composites graphite/TiO2 with various ratio of TiO2 nanoparticles (30wt.%, and 50wt.%) to graphite were prepared using a thermal hydrolysis of titanylsulfate in the presence of graphite particles, and subsequently dried at 80°C. X-ray powder diffraction, transmission electron microscopy and Raman microspectroscopy served as phase-analytical methods distinguishing anatase and rutile phases in the prepared composites. Scanning and transmission electron microscopy techniques were used for characterization of morphology of the prepared samples. A developed modification of the standard microdilution test was used for in vitro evaluation of daylight induced antibacterial activity, using four common human pathogenic bacterial strains (Staphylococcus aureus, Escherichia coli, Enterococcus faecalis and Pseudomonas aeruginosa). Antibacterial activity of the graphite/TiO2 nanocomposites could be based mainly on photocatalytic reaction with subsequent potential interaction of reactive oxygen species with bacterial cells. During the antibacterial activity experiments, the graphite/TiO2 nanocomposites exhibited antibacterial activity, where differences in the onset of activity and activity against bacterial strains were observed. The highest antibacterial activity evaluated as minimum inhibitory concentration was observed against P. aeruginosa after 180min of irradiation.

Possible role of nano-sized particles in chronic tonsillitis and tonsillar carcinoma: a pilot study

This study aimed to evaluate the palatine tonsils of patients with chronic tonsillitis and spinocellular carcinoma to determine the presence of nano-sized particles. Tonsil samples from adult patients with chronic tonsillitis and spinocellular carcinoma of the palatine tonsil were dried and analyzed using a scanning electron microscope with the X-ray microprobe of an energy-dispersive spectroscope. Demographic data and smoking histories were obtained. The principal metals found in almost all tissues analyzed were iron, chromium, nickel, aluminum, zinc, and copper. No significant difference in elemental composition was found between the group of patients with chronic tonsillitis and the group with spinocellular carcinoma of the palatine tonsil. Likewise, no significant difference was found between the group of smokers and the group of nonsmokers. The presence of various micro- and nano-sized metallic particles in human tonsils was confirmed. These particles may potentially cause an inflammatory response as well as neoplastic changes in human palatine tonsils similar to those occurring in the lungs. Further and more detailed studies addressing this issue, including studies designed to determine the chemical form of the metals detected, studies devoted to quantitative analysis, biokinetics, and to the degradation and elimination of nanoparticles are needed for a more detailed prediction of the relation between the diagnosis and the presence of specific metal nanoparticles in tonsillar tissue.

Metal-based particles in human amniotic fluids of fetuses with normal karyotype and congenital malformation—a pilot study

This study explores the inorganic composition of amniotic fluid in healthy human fetuses and fetuses with congenital malformation with a special attention to presence of metal-based solid particles. Amniotic fluid originates from maternal blood and provides fetus mechanical protection and nutrients. In spite of this crucial role, the environmental impact on the composition of amniotic fluid remains poorly studied. The samples of human amniotic fluids were obtained by amniocentesis, including both healthy pregnancies and those with congenital malformations. The samples were analysed using several techniques, including Raman microspectroscopy, scanning electron microscopy with energy-dispersed spectrometry (SEM-EDS), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. Several metal-based particles containing barium, titanium, iron, and other elements were detected by SEM-EDS and Raman microspectroscopy. XRD analysis detected only sodium chloride as the main component of all amniotic fluid samples. Infrared spectroscopy detected protein-like organic components. Majority of particles were in form of agglomerates up to tens of micrometres in size, consisting of mainly submicron particles. By statistical analysis (multiple correspondence analysis), it was observed that groups of healthy and diagnosed fetuses form two separate groups and therefore, qualitative differences in chemical composition may have distinct biological impact. Overall, our results suggest that metal-based nanosized pollutants penetrate into the amniotic fluid and may affect human fetuses.

Structure and properties of kaolinite intercalated with potassium acetate and their nanocomposites with polyamide 1010

The intercalation complex marked as KAA was a modified kaolinite (KA) with potassium acetate as an intercalating agent, which was used as a reinforcement to prepare polyamide 1010 (PA1010) matrix nanocomposites (PKAA) by melt compounding. X-Ray diffraction results indicated that the interlayer basal spacing increased from 0.720 nm (KA) to 1.411 nm (KAA), after an intercalation process with an intercalation ratio of 99.7%. The nanocomposite with 2 wt% KAA exhibited the best comprehensive mechanical properties, including tensile strength, elongation at break, and notched impact strength. Furthermore, the thermal performance of these nanocomposites could be effectively improved, which manifested as the elevated glass transition temperature and thermal decomposition temperature in the test results of the dynamic mechanical thermal analysis and thermogravimetric analysis (TGA). The melting point and crystallization behavior of PKAA were also increased due to results from the differential scanning calorimetry. Besides, the bilayer inserting model was simulated by Materials Studios software to further understand the structure-function relationship of PKAA.

Automotive airborne brake wear debris nanoparticles and cytokinesis-block micronucleus assay in peripheral blood lymphocytes: A pilot study

Motor vehicle exhaust and non-exhaust processes play a significant role in environmental pollution, as they are a source of the finest particulate matter. Emissions from non-exhaust processes include wear-products of brakes, tires, automotive hardware, road surface, and traffic signs, but still are paid little attention to. Automotive friction composites for brake pads are composite materials which may consist of potentially hazardous materials and there is a lack of information regarding the potential influence of the brake wear debris (BWD) on the environment, especially on human health. Thus, we focused our study on the genotoxicity of the airborne fraction of BWD using a brake pad model representing an average low-metallic formulation available in the EU market. BWD was generated in the laboratory by a full-scale brake dynamometer and characterized by Raman microspectroscopy, scanning electron microscopy, and transmission electron microscopy showing that it contains nano-sized crystalline metal-based particles. Genotoxicity tested in human lymphocytes in different testing conditions showed an increase in frequencies of micronucleated binucleated cells (MNBNCs) exposed for 48h to BWD nanoparticles (NPs) (with 10% of foetal calf serum in culture medium) compared with lymphocytes exposed to medium alone, statistically significant only at the concentration 3µg/cm(2) (p=0.032).

Functional nanostructures of montmorillonite with conducting polyaniline

Abstract The present work describes the effect of montmorillonite (MMT) particles on the alignment of conducting polyaniline (PANI) chains in a PANI/MMT composite. The composite was prepared both as a powder, pressed into pellets, and as thin films deposited on glass surfaces. For comparison, pure PANI was also prepared in these two forms. A combination of X-ray powder diffraction analysis and molecular modelling confirmed the successful intercalation of the PANI into theMMT, while Raman spectroscopy confirmed the presence of the conducting form of PANI (i.e. the emeraldine salt) in all samples. Scanning electron microscopy, transmission electron microscopy and atomic force microscopy were used to study the morphologies of all samples. Conductivity measurements showed that the presence of the MMT particles in the PANI/MMT composites contributes to a significant increase in the electrical conductivity in comparison with the pure PANI samples. Moreover, in the pressed pellets the presence of theMMT particles led to an extremely high electrical anisotropy. TheUV-VIS spectroscopy results showed that the PANI/MMT thin film exhibited a selective transmittance in the range 450-650 nm; therefore, the PANI/MMT thin film is not only conductive, but also suitable for use in various optical applications.

Detection of nano- and micro-sized particles in routine biopsy material - pilot study

BACKGROUND Nanotechnology is receiving enormous funding. Very little however is known about the health dangers of this technology so far. Chronic tonsillitis is one of a number of diseases called idiopathic. Among other factors, the tonsils are exposed to suspended particles in inhaled air including nano particles. The objective of this study was to detect and evaluate metallic particles in human tonsil tissue diagnosed with chronic tonsillitis and in amniotic fluid as a comparison. METHODS . Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) was used for identification of solid particles in a total of 64 samples of routinely analyzed biopsy and cytologic material. RESULTS Almost all samples were found to contain solid particles of various metals. The most frequent, regardless of diagnosis, were iron, chromium, nickel and aluminium. The size, determined using SEM, varied from around 500 nm to 25 µm. The majority formed aggregates of several micrometers in size but there were a significant number of smaller (sub-micrometer or nano-sized) particles present. The incidence of metallic particles was similar in child and adult tissues. The difference was in composition: the presence of several metals in adults was due to occupational exposure. CONCLUSIONS The presence of metallic particles in pathologically altered tissues may signal an alternative causation of some diseases. The ethiopathogenic explanation of these diseases associated with the presence of nano-sized particles in the organism has emerged into a new field of pathology, nanopathology.