Jane P. Bearinger

Evaluation of a carbonic anhydrase mimic for industrial carbon capture.

Zinc(II) cyclen, a small molecule mimic of the enzyme carbonic anhydrase, was evaluated under rigorous conditions resembling those in an industrial carbon capture process: high pH (>12), nearly saturated salt concentrations (45% K2CO3) and elevated temperatures (100-130 °C). We found that the catalytic activity of zinc cyclen increased with increasing temperature and pH and was retained after exposure to a 45% w/w K2CO3 solution at 130 °C for 6 days. However, high bicarbonate concentrations markedly reduced the activity of the catalyst. Our results establish a benchmark level of stability and provide qualitative insights for the design of improved small-molecule carbon capture catalysts.

Development and Initial Results of a Low Cost, Disposable, Point-of-Care Testing Device for Pathogen Detection

Development of small footprint, disposable, fast, and inexpensive devices for pathogen detection in the field and clinic would benefit human and veterinary medicine by allowing evidence-based responses to future out breaks. We designed and tested an integrated nucleic acid extraction and amplification device employing a loop-mediated isothermal amplification (LAMP) or reverse transcriptase-LAMP assay. Our system provides a screening tool with polymerase-chain-reaction-level sensitivity and specificity for outbreak detection, response, and recovery. Time to result is ~90 min. The device utilizes a swab that collects sample and then transfers it to a disc of cellulose-based nucleic acid binding paper. The disc is positioned within a disposable containment tube with a manual loading port. In order to test for the presence of target pathogens, LAMP reagents are loaded through the tubes port into contact with the sample containing cellulose disc. The reagents then are isothermally heated to 63°C for ~1 h to achieve sequence-specific target nucleic acid amplification. Due to the presence of a colorimetric dye, amplification induces visible color change in the reagents from purple to blue. As initial demonstrations, we detected methicillin resistant Staphylococcus aureus genomic DNA, as well as recombinant and live foot-and-mouth disease virus.

Shape Memory Polymer Therapeutic Devices for Stroke

Shape memory polymers (SMPs) are attracting a great deal of interest in the scientific community for their use in applications ranging from light weight structures in space to micro-actuators in MEMS devices. These relatively new materials can be formed into a primary shape, reformed into a stable secondary shape, and then controllably actuated to recover their primary shape. The first part of this presentation will be a brief review of the types of polymeric structures which give rise to shape memory behavior in the context of new shape memory polymers with highly regular network structures recently developed at LLNL for biomedical devices. These new urethane SMPs have improved optical and physical properties relative to commercial SMPs, including improved clarity, high actuation force, and sharper actuation transition. In the second part of the presentation we discuss the development of SMP based devices for mechanically removing neurovascular occlusions which result in ischemic stroke. These devices are delivered to the site of the occlusion in compressed form, are pushed through the occlusion, actuated (usually optically) to take on an expanded conformation, and then used to dislodge and grip the thrombus while it is withdrawn through the catheter.

Chemical tethering of motile bacteria to silicon surfaces.

We chemically immobilized live, motile Escherichia coli on micrometer-scale, photocatalytically patterned silicon surfaces via amine- and carboxylic acid-based chemistries. Immobilization facilitated (i) controlled positioning; (ii) high resolution cell wall imaging via atomic force microscopy (AFM); and (iii) chemical analysis with time-of-flight-secondary ion mass spectrometry (ToF-SIMS). Spinning motion of tethered bacteria, captured with fast-acquisition video, proved microbe viability. We expect our protocols to open new experimental doors for basic and applied studies of microorganisms, from host-pathogen relationships, to microbial forensics and drug discovery, to biosensors and biofuel cell optimization.

Detection of Bacillus anthracis from spores and cells by loop-mediated isothermal amplification without sample preparation

Loop-mediated isothermal amplification (LAMP) is a technique capable of rapidly amplifying specific nucleic acid sequences without specialized thermal cycling equipment. In addition, several detection methods that include dye fluorescence, gel electrophoresis, turbidity and colorimetric change, can be used to measure or otherwise detect target amplification. To date, publications have described the requirement for some form of sample nucleic acid extraction (boiling, lysis, DNA purification, etc.) prior to initiating a LAMP reaction. We demonstrate here, the first LAMP positive results obtained from vegetative cells and spores of Bacillus anthracis without nucleic acid extraction. Our data show that the simple addition of cells or spores to the reaction mixture, followed by heating at 63°C is all that is required to reproducibly amplify and detect target plasmid and chromosomal DNA via colorimetric change. The use of three primer sets targeting both plasmids and the chromosome of B. anthracis allows for the rapid discrimination of non-pathogenic bacteria from pathogenic bacteria within 30 min of sampling. Our results indicate that direct testing of B. anthracis spores and cells via LAMP assay will greatly simplify and shorten the detection process by eliminating nucleic acid purification. These results may allow more rapid detection of DNA from pathogenic organisms present in field and environmental samples.

Phototocatalytic Lithography of Poly(propylene sulfide) Block Copolymers: Toward High-Throughput Nanolithography for Biomolecular Arraying Applications

Photocatalytic lithography (PCL) is an inexpensive, fast, and robust method of oxidizing surface chemical moieties to produce patterned substrates. This technique has utility in basic biological research as well as various biochip applications. We report on porphyrin-based PCL for patterning poly(propylene sulfide) block copolymer films on gold substrates on the micrometer and submicrometer scales. We confirm chemical patterning with imaging ToF-SIMS and low-voltage SEM. Biomolecular patterning on micrometer and submicrometer scales is demonstrated with proteins, protein-linked beads. and fluorescently labeled proteins.

Porphyrin-based photocatalytic lithography

Photocatalytic lithography couples light with photoreactive coated mask materials to pattern surface chemistry. We excite porphyrins to create radical species that photocatalytically oxidize, and thereby pattern, chemistries in the local vicinity. The technique advantageously is suited for use with a wide variety of substrates. It is fast and robust, and the wavelength of light does not limit the resolution of patterned features. We have patterned proteins and cells to demonstrate the utility of photocatalytic lithography in life science applications.

Comparison and analysis of zinc and cobalt-based systems as catalytic entities for the hydration of carbon dioxide.

In nature, the zinc metalloenzyme carbonic anhydrase II (CAII) efficiently catalyzes the conversion of carbon dioxide (CO2) to bicarbonate under physiological conditions. Many research efforts have been directed towards the development of small molecule mimetics that can facilitate this process and thus have a beneficial environmental impact, but these efforts have met very limited success. Herein, we undertook quantum mechanical calculations of four mimetics, 1,5,9-triazacyclododedacane, 1,4,7,10-tetraazacyclododedacane, tris(4,5-dimethyl-2-imidazolyl)phosphine, and tris(2-benzimidazolylmethyl)amine, in their complexed form either with the Zn2+ or the Co2+ ion and studied their reaction coordinate for CO2 hydration. These calculations demonstrated that the ability of the complex to maintain a tetrahedral geometry and bind bicarbonate in a unidentate manner were vital for the hydration reaction to proceed favorably. Furthermore, these calculations show that the catalytic activity of the examined zinc complexes was insensitive to coordination states for zinc, while coordination states above four were found to have an unfavorable effect on product release for the cobalt counterparts.

Porphyrin-based Photocatalytic Nanolithography: A NEW FABRICATION TOOL FOR PROTEIN ARRAYS*

Nanoarray fabrication is a multidisciplinary endeavor encompassing materials science, chemical engineering, and biology. We formed nanoarrays via a new technique, porphyrin-based photocatalytic nanolithography. The nanoarrays, with controlled features as small as 200 nm, exhibited regularly ordered patterns and may be appropriate for (a) rapid and parallel proteomics screening of immobilized biomolecules, (b) protein-protein interactions, and/or (c) biophysical and molecular biology studies involving spatially dictated ligand placement. We demonstrated protein immobilization utilizing nanoarrays fabricated via photocatalytic nanolithography on silicon substrates where the immobilized proteins are surrounded by a non-fouling polymer background.