Ward Small

Biomedical applications of thermally activated shape memory polymers

Shape memory polymers (SMPs) are smart materials that can remember a primary shape and can return to this primary shape from a deformed secondary shape when given an appropriate stimulus. This property allows them to be delivered in a compact form via minimally invasive surgeries in humans, and deployed to achieve complex final shapes. Here we review the various biomedical applications of SMPs and the challenges they face with respect to actuation and biocompatibility. While shape memory behavior has been demonstrated with heat, light and chemical environment, here we focus our discussion on thermally stimulated SMPs.

Laser-activated shape memory polymer intravascular thrombectomy device

A blood clot (thrombus) that becomes lodged in the arterial network supplying the brain can cause an ischemic stroke, depriving the brain of oxygen and often resulting in permanent disability. As an alternative to conventional clot-dissolving drug treatment, we are developing an intravascular laser-activated therapeutic device using shape memory polymer (SMP) to mechanically retrieve the thrombus and restore blood flow to the brain. Thermal imaging and computer simulation were used to characterize the optical and photothermal behavior of the SMP microactuator. Deployment of the SMP device in an in vitro thrombotic vascular occlusion model demonstrated the clinical treatment concept.

Plasma mediated ablation of biological tissues with nanosecond-to-femtosecond laser pulses: relative role of linear and nonlinear absorption

Plasma mediated ablation of collagen gels and porcine cornea was studied at various laser pulse durations in the range of 1 ns-300 fs at 1053-nm wavelength. It was found that pulsed laser ablation of transparent and weakly absorbing gels is always mediated by plasma. On the other hand, ablation of strongly absorbing tissues is mediated by plasma in the ultrashort-pulse range only. Ablation threshold along with plasma optical breakdown threshold decreases with increasing tissue absorbance for subnanosecond pulses. In contrast, the ablation threshold was found to be practically independent of tissue linear absorption for femtosecond laser pulses. The mechanism of optical breakdown at the tissue surface was theoretically investigated. In the nanosecond range of laser pulse duration, optical breakdown proceeds via avalanche ionization initiated by heating of electrons contributed by strongly absorbing impurities at the tissue surface. In the ultrashortpulse range, optical breakdown is initiated by multiphoton ionization of the irradiated medium (six photons in case of tissue irradiated at 1053-nm wavelength), and is less sensitive to linear absorption. High-quality ablation craters with no thermal or mechanical damage to surrounding material were obtained with subpicosecond laser pulses. Experimental results suggest that subpicosecond plasma mediated ablation can be employed as a tool for precise laser microsurgery of various tissues.

Prototype laser-activated shape memory polymer foam device for embolic treatment of aneurysms

Conventional embolization of cerebral aneurysms using detachable coils is time-consuming and often requires retreatment. These drawbacks have prompted the development of new methods of aneurysm occlusion. We present the fabrication and laser deployment of a shape memory (SMP) polymer expanding foam device. Data acquired in an in vitro basilar aneurysm model with and without flow showed successful treatment, with the flow rate affecting foam expansion and the temperature at the aneurysm wall.

Shape Memory Polymer Stent With Expandable Foam: A New Concept for Endovascular Embolization of Fusiform Aneurysms

We demonstrate a new concept for endovascular embolization of nonnecked fusiform aneurysms. A device prototype consisting of a stent augmented with expandable foam, both made from shape memory polymer, was fabricated and deployed in an in vitro model. Visual observation indicated that the foam achieved embolization of the aneurysm while the stent maintained an open lumen in the parent artery. The shape memory polymer stent-foam device is a potential tool for treatment of nonnecked fusiform aneurysms, as well as an alternative to stent- and balloon-assisted coil embolization of wide-necked aneurysms

Fabrication and in vitro deployment of a laser-activated shape memory polymer vascular stent

BackgroundVascular stents are small tubular scaffolds used in the treatment of arterial stenosis (narrowing of the vessel). Most vascular stents are metallic and are deployed either by balloon expansion or by self-expansion. A shape memory polymer (SMP) stent may enhance flexibility, compliance, and drug elution compared to its current metallic counterparts. The purpose of this study was to describe the fabrication of a laser-activated SMP stent and demonstrate photothermal expansion of the stent in an in vitro artery model.MethodsA novel SMP stent was fabricated from thermoplastic polyurethane. A solid SMP tube formed by dip coating a stainless steel pin was laser-etched to create the mesh pattern of the finished stent. The stent was crimped over a fiber-optic cylindrical light diffuser coupled to an infrared diode laser. Photothermal actuation of the stent was performed in a water-filled mock artery.ResultsAt a physiological flow rate, the stent did not fully expand at the maximum laser power (8.6 W) due to convective cooling. However, under zero flow, simulating the technique of endovascular flow occlusion, complete laser actuation was achieved in the mock artery at a laser power of ~8 W.ConclusionWe have shown the design and fabrication of an SMP stent and a means of light delivery for photothermal actuation. Though further studies are required to optimize the device and assess thermal tissue damage, photothermal actuation of the SMP stent was demonstrated.

Porous Shape-Memory Polymers

Porous shape memory polymers (SMPs) include foams, scaffolds, meshes, and other polymeric substrates that possess porous three-dimensional macrostructures. Porous SMPs exhibit active structural and volumetric transformations and have driven investigations in fields ranging from biomedical engineering to aerospace engineering to the clothing industry. The present review article examines recent developments in porous SMPs, with focus given to structural and chemical classification, methods of characterization, and applications. We conclude that the current body of literature presents porous SMPs as highly interesting smart materials with potential for industrial use.

A Shape Memory Polymer Dialysis Needle Adapter for the Reduction of Hemodynamic Stress Within Arteriovenous Grafts

A deployable, shape memory polymer adapter is investigated for reducing the hemodynamic stress caused by dialysis needle flow impingement within an arteriovenous graft. Computational fluid dynamics simulations of dialysis sessions with and without the adapter demonstrate that the adapter provides a significant decrease in the wall shear stress. Preliminary in vitro flow visualization measurements are made within a graft model following delivery and actuation of a prototype shape memory polymer adapter. Both the simulations and the qualitative flow visualization measurements demonstrate that the adapter reduces the severity of the dialysis needle flow impingement on the vascular access graft.

Prototype Fabrication and Preliminary In Vitro Testing of a Shape Memory Endovascular Thrombectomy Device

An electromechanical microactuator comprised of shape memory polymer (SMP) and shape memory nickel-titanium alloy (nitinol) was developed and used in an endovascular thrombectomy device prototype. The microactuator maintains a straight rod shape until an applied current induces electro-resistive (Joule) heating, causing the microactuator to transform into a corkscrew shape. The straight-to-corkscrew transformation geometry was chosen to permit endovascular delivery through (straight form) and retrieval of (corkscrew form) a stroke-causing thrombus (blood clot) in the brain. Thermal imaging of the microactuator during actuation in air indicated that the steady-state temperature rise caused by Joule heating varied quadratically with applied current and that actuation occurred near the glass transition temperature of the SMP (86degC). To demonstrate clinical application, the device was used to retrieve a blood clot in a water-filled silicone neurovascular model. Numerical modeling of the heat transfer to the surrounding blood and associated thermal effects on the adjacent artery potentially encountered during clinical use suggested that any thermal damage would likely be confined to localized areas where the microactuator was touching the artery wall. This shape memory mechanical thrombectomy device is a promising tool for treating ischemic stroke without the need for infusion of clot-dissolving drugs.

Thermomechanical Properties, Collapse Pressure, and Expansion of Shape Memory Polymer Neurovascular Stent Prototypes

Shape memory polymer stent prototypes were fabricated from thermoplastic polyurethane. Commercial stents are generally made of stainless steel or other alloys. These alloys are too stiff and prevent most stent designs from being able to navigate small and tortuous vessels to reach intracranial lesions. A solid tubular model and a high flexibility laser etched model are presented. The stents were tested for collapse in a pressure chamber. At 37 degrees C, the full collapse pressure was comparable to that of commercially available stents, and higher than the estimated maximum pressure exerted by intracranial arteries. However, there is a potential for onset of collapse, which needs further study. The stents were crimped and expanded, the laser-etched stent showed full recovery with an expansion ratio of 2.7 and a 1% axial shortening.