Jang Wook Choi

Stable cycling of double-walled silicon nanotube battery anodes through solid-electrolyte interphase control

Although the performance of lithium ion-batteries continues to improve, their energy density and cycle life remain insufficient for applications in consumer electronics, transport and large-scale renewable energy storage. Silicon has a large charge storage capacity and this makes it an attractive anode material, but pulverization during cycling and an unstable solid-electrolyte interphase has limited the cycle life of silicon anodes to hundreds of cycles. Here, we show that anodes consisting of an active silicon nanotube surrounded by an ion-permeable silicon oxide shell can cycle over 6,000 times in half cells while retaining more than 85% of their initial capacity. The outer surface of the silicon nanotube is prevented from expansion by the oxide shell, and the expanding inner surface is not exposed to the electrolyte, resulting in a stable solid-electrolyte interphase. Batteries containing these double-walled silicon nanotube anodes exhibit charge capacities approximately eight times larger than conventional carbon anodes and charging rates of up to 20C (a rate of 1C corresponds to complete charge or discharge in one hour).

Nitrogen-Doped Graphene for High-Performance Ultracapacitors and the Importance of Nitrogen-Doped Sites at Basal Planes

Although various carbon nanomaterials including activated carbon, carbon nanotubes, and graphene have been successfully demonstrated for high-performance ultracapacitors, their capacitances need to be improved further for wider and more challenging applications. Herein, using nitrogen-doped graphene produced by a simple plasma process, we developed ultracapacitors whose capacitances (∼280 F/g(electrode)) are about 4 times larger than those of pristine graphene based counterparts without sacrificing other essential and useful properties for ultracapacitor operations including excellent cycle life (>200,000), high power capability, and compatibility with flexible substrates. While we were trying to understand the improved capacitance using scanning photoemission microscopy with a capability of probing local nitrogen-carbon bonding configurations within a single sheet of graphene, we observed interesting microscopic features of N-configurations: N-doped sites even at basal planes, distinctive distributions of N-configurations between edges and basal planes, and their distinctive evolutions with plasma duration. The local N-configuration mappings during plasma treatment, alongside binding energy calculated by density functional theory, revealed that the origin of the improved capacitance is a certain N-configuration at basal planes.

A 160-kilobit molecular electronic memory patterned at 10 11 bits per square centimetre

The primary metric for gauging progress in the various semiconductor integrated circuit technologies is the spacing, or pitch, between the most closely spaced wires within a dynamic random access memory (DRAM) circuit. Modern DRAM circuits have 140 nm pitch wires and a memory cell size of 0.0408 μm2. Improving integrated circuit technology will require that these dimensions decrease over time. However, at present a large fraction of the patterning and materials requirements that we expect to need for the construction of new integrated circuit technologies in 2013 have ‘no known solution’. Promising ingredients for advances in integrated circuit technology are nanowires, molecular electronics and defect-tolerant architectures, as demonstrated by reports of single devices and small circuits. Methods of extending these approaches to large-scale, high-density circuitry are largely undeveloped. Here we describe a 160,000-bit molecular electronic memory circuit, fabricated at a density of 1011 bits cm-2 (pitch 33 nm; memory cell size 0.0011 μm2), that is, roughly analogous to the dimensions of a DRAM circuit projected to be available by 2020. A monolayer of bistable, [2]rotaxane molecules served as the data storage elements. Although the circuit has large numbers of defects, those defects could be readily identified through electronic testing and isolated using software coding. The working bits were then configured to form a fully functional random access memory circuit for storing and retrieving information.

Highly conductive paper for energy-storage devices

Paper, invented more than 2,000 years ago and widely used today in our everyday lives, is explored in this study as a platform for energy-storage devices by integration with 1D nanomaterials. Here, we show that commercially available paper can be made highly conductive with a sheet resistance as low as 1 ohm per square (Ω/sq) by using simple solution processes to achieve conformal coating of single-walled carbon nanotube (CNT) and silver nanowire films. Compared with plastics, paper substrates can dramatically improve film adhesion, greatly simplify the coating process, and significantly lower the cost. Supercapacitors based on CNT-conductive paper show excellent performance. When only CNT mass is considered, a specific capacitance of 200 F/g, a specific energy of 30–47 Watt-hour/kilogram (Wh/kg), a specific power of 200,000 W/kg, and a stable cycling life over 40,000 cycles are achieved. These values are much better than those of devices on other flat substrates, such as plastics. Even in a case in which the weight of all of the dead components is considered, a specific energy of 7.5 Wh/kg is achieved. In addition, this conductive paper can be used as an excellent lightweight current collector in lithium-ion batteries to replace the existing metallic counterparts. This work suggests that our conductive paper can be a highly scalable and low-cost solution for high-performance energy storage devices.

3D Macroporous Graphene Frameworks for Supercapacitors with High Energy and Power Densities

In order to develop energy storage devices with high power and energy densities, electrodes should hold well-defined pathways for efficient ionic and electronic transport. Herein, we demonstrate high-performance supercapacitors by building a three-dimensional (3D) macroporous structure that consists of chemically modified graphene (CMG). These 3D macroporous electrodes, namely, embossed-CMG (e-CMG) films, were fabricated by using polystyrene colloidal particles as a sacrificial template. Furthermore, for further capacitance boost, a thin layer of MnO(2) was additionally deposited onto e-CMG. The porous graphene structure with a large surface area facilitates fast ionic transport within the electrode while preserving decent electronic conductivity and thus endows MnO(2)/e-CMG composite electrodes with excellent electrochemical properties such as a specific capacitance of 389 F/g at 1 A/g and 97.7% capacitance retention upon a current increase to 35 A/g. Moreover, when the MnO(2)/e-CMG composite electrode was asymmetrically assembled with an e-CMG electrode, the assembled full cell shows remarkable cell performance: energy density of 44 Wh/kg, power density of 25 kW/kg, and excellent cycle life.

Electrospun Core-Shell Fibers for Robust Silicon Nanoparticle Based Lithium Ion Battery Anodes

Because of its unprecedented theoretical capacity near 4000 mAh/g, which is approximately 10-fold larger compared to those of the current commercial graphite anodes, silicon has been the most promising anode for lithium ion batteries, particularly targeting large-scale energy storage applications including electrical vehicles and utility grids. Nevertheless, Si suffers from its short cycle life as well as the limitation for scalable electrode fabrication. Herein, we develop an electrospinning process to produce core-shell fiber electrodes using a dual nozzle in a scalable manner. In the core-shell fibers, commercially available nanoparticles in the core are wrapped by the carbon shell. The unique core-shell structure resolves various issues of Si anode operations, such as pulverization, vulnerable contacts between Si and carbon conductors, and an unstable sold-electrolyte interphase, thereby exhibiting outstanding cell performance: a gravimetric capacity as high as 1384 mAh/g, a 5 min discharging rate capability while retaining 721 mAh/g, and cycle life of 300 cycles with almost no capacity loss. The electrospun core-shell one-dimensional fibers suggest a new design principle for robust and scalable lithium battery electrodes suffering from volume expansion.

Mussel‐Inspired Polydopamine‐Treated Polyethylene Separators for High‐Power Li‐Ion Batteries

Due to high energy densities and excellent cycle lives, Li-ion batteries (LIBs) have rapidly spread into portable electronics applications. [ 1–3 ] However, their performance standards in various areas including energy and power densities, cycle lives, and safety concerns need to be improved further for the future emerging markets, particularly targeting sustainable road transportation represented by electric vehicles (EVs). [ 1 , 3–5 ] Among the various standards, the low power density should be urgently addressed to enable the emergence of those applications. [ 4 , 6 , 7 ]

Nitrogen-Doped Multiwall Carbon Nanotubes for Lithium Storage with Extremely High Capacity

The increasing demands on high performance energy storage systems have raised a new class of devices, so-called lithium ion capacitors (LICs). As its name says, LIC is an intermediate system between lithium ion batteries and supercapacitors, designed for taking advantages of both types of energy storage systems. Herein, as a quest to improve the Li storage capability compared to that of other existing carbon nanomaterials, we have developed extrinsically defective multiwall carbon nanotubes by nitrogen-doping. Nitrogen-doped carbon nanotubes contain wall defects through which lithium ions can diffuse so as to occupy a large portion of the interwall space as storage regions. Furthermore, when integrated with 3 nm nickel oxide nanoparticles for a further capacity boost, nitrogen doping enables unprecedented cell performance by engaging anomalous electrochemical phenomena such as nanoparticles division into even smaller ones, their agglomeration-free diffusion between nitrogen-doped sites as well as capacity rise with cycles. The final cells exhibit a capacity as high as 3500 mAh/g, a cycle life of greater than 10,000 times, and a discharge rate capability of 1.5 min while retaining a capacity of 350 mAh/g.

Mussel‐Inspired Adhesive Binders for High‐Performance Silicon Nanoparticle Anodes in Lithium‐Ion Batteries

Conjugation of mussel-inspired catechol groups to various polymer backbones results in materials suitable as silicon anode binders. The unique wetness-resistant adhesion provided by the catechol groups allows the silicon nanoparticle electrodes to maintain their structure throughout the repeated volume expansion and shrinkage during lithiation cycling, thus facilitating substantially improved specific capacities and cycle lives of lithium-ion batteries.

Bendable Inorganic Thin-Film Battery for Fully Flexible Electronic Systems

High-performance flexible power sources have gained attention, as they enable the realization of next-generation bendable, implantable, and wearable electronic systems. Although the rechargeable lithium-ion battery (LIB) has been regarded as a strong candidate for a high-performance flexible energy source, compliant electrodes for bendable LIBs are restricted to only a few materials, and their performance has not been sufficient for them to be applied to flexible consumer electronics including rollable displays. In this paper, we present a flexible thin-film LIB developed using the universal transfer approach, which enables the realization of diverse flexible LIBs regardless of electrode chemistry. Moreover, it can form high-temperature (HT) annealed electrodes on polymer substrates for high-performance LIBs. The bendable LIB is then integrated with a flexible light-emitting diode (LED), which makes an all-in-one flexible electronic system. The outstanding battery performance is explored and well supported by finite element analysis (FEA) simulation.