Jarbas Caiado de Castro Neto

Two-mirror telescope design with third-order coma insensitive to decenter misalignment

Misalignments always occur in real optical systems. These misalignments do not generate new aberration forms, but they change the aberration field dependence. Two-mirror telescopes have been used in several applications. We analyze a two-mirror telescope configuration that has negligible sensitivity to decenter misalignments. By applying the wave aberration theory for plane-symmetric optical systems it is shown that the asphericity in the secondary mirror, if properly chosen, can compensate for any decenter perturbation allowing third-order coma unchanged across the field of view. For any two-mirror system it is possible to find a configuration in which decenter misalignments do not generate field-uniform coma.

Fluorescence spectroscopy of teeth and bones of rats to assess demineralization: In vitro, in vivo and ex vivo studies

This study investigated the effects of demineralization on teeth and bones evaluated by fluorescence spectroscopy and micro energy-dispersive X-ray fluorescence spectrometry (μ-EDXRF) in rats. For in vitro study, 20 teeth of Wistar rats were removed and decalcified to evaluate fluorescence. For in vivo study, 10 female Wistar rats aged 6months were randomized into 2 groups: Control Group (C): non-ovariectomized rats; Ovariectomy Group (OV): ovariectomized rats to induce osteoporosis. The fluorescence spectroscopy of the teeth was performed for long-term (until 180days). For ex vivo study, the tooth and femur bone of the Wistar rats were removed at 180days to perform fluorescence spectroscopy using excitation laser at 408 and 532nm and μ-EDXRF for calcium (Ca) and phosphorus (P) analysis. There were no intergroup differences in fluorescence spectra with laser at 408nm (p≥0.05), but there were changes in the fluorescence spectra using laser at 532nm which led to both the wavelength shift and changes in the band area (p<0.05). The concentrations of P and Ca for the dentine and cortical bone, respectively, were significantly reduced in OV (p<0.05). Demineralization leading to loss of tissue quality may be assessed by fluorescence spectroscopy using 532nm laser. These findings corroborate those obtained by μ-EDXRF.

Optical analysis of electro-optical systems by MTF calculus

One of the widely used methods for performance analysis of an optical system is the determination of the Modulation Transfer Function (MTF). The MTF represents a quantitative and direct measure of image quality, and, besides being an objective test, it can be used on concatenated optical system. This paper presents the application of software called SMTF (software modulation transfer function), built in C++ and Open CV platforms for MTF calculation on electro-optical system. Through this technique, it is possible to develop specific method to measure the real time performance of a digital fundus camera, an infrared sensor and an ophthalmological surgery microscope. Each optical instrument mentioned has a particular device to measure the MTF response, which is being developed. Then the MTF information assists the analysis of the optical system alignment, and also defines its resolution limit by the MTF graphic. The result obtained from the implemented software is compared with the theoretical MTF curve from the analyzed systems.

Noninvasive assessments of skin glycated proteins by fluorescence and Raman techniques in diabetics and nondiabetics

Diabetes is a complex metabolic disease and has chronic complications. It has been considered a serious public health problem. The aim of the current study was to evaluate skin glycated proteins through fluorescence and Raman techniques. One hundred subjects were invited to participate in the study. Six volunteers did not attend due to exclusion criteria or a change of mind about participating. Therefore, 94 volunteers were grouped according to age range (20-80 years), health condition (nondiabetic, with insulin resistance [IR] and/or diabetic) and Fitzpatrick skin type (I-VI). The fluorescence spectrometer and the portable Raman spectroscopy system were used to measure glycated proteins from the skin. There was elevated skin autofluorescence in healthy middle-aged and elderly subjects, as well as in patients with IR and/or diabetes. Regarding Raman spectroscopy, changes in the skin hydration state, degradation of type I collagen and greater glycation were related for diabetes and chronological aging. Weak and positive correlation between the skin autofluorescence and the Raman peaks ratio (855/876) related to the glycated proteins was also found. Raman spectroscopy shows several bands for spectral analyses, complementing the fluorescence data. Therefore, this study contributes to understanding of the optical of human skin for noninvasive diabetes screening.

Evaluation of retinal illumination in coaxial fundus camera

Retinal images are obtained by simultaneously illuminating and imaging the retina, which is achieved using a fundus camera. This device meets low light illumination of the fundus with high resolution and reflection free images. Although the current equipment presents a sophisticated solution, it is complex to align due to the high number of off-axis components. In this work, we substitute the complex illumination system by a ring of LEDs mounted coaxially to the imaging optical system, positioning it in the place of the holed mirror of the traditional optical design. We evaluated the impact of this substitution regarding to image quality (measured through the modulation transfer function) and illumination uniformity produced by this system on the retina. The results showed there is no change in image quality and no problem was detected concerning uniformity compared to the traditional equipment. Consequently, we avoided off-axis components, easing the alignment of the equipment without reducing both image quality and illumination uniformity.Retinal images are obtained by simultaneously illuminating and imaging the retina, which is achieved using a fundus camera. This device meets low light illumination of the fundus with high resolution and reflection free images. Although the current equipment presents a sophisticated solution, it is complex to align due to the high number of off-axis components. In this work, we substitute the complex illumination system by a ring of LEDs mounted coaxially to the imaging optical system, positioning it in the place of the holed mirror of the traditional optical design. We evaluated the impact of this substitution regarding to image quality (measured through the modulation transfer function) and illumination uniformity produced by this system on the retina. The results showed there is no change in image quality and no problem was detected concerning uniformity compared to the traditional equipment. Consequently, we avoided off-axis components, easing the alignment of the equipment without reducing both image quality and illumination uniformity.

Coaxial fundus camera for opthalmology

A Fundus Camera for ophthalmology is a high definition device which needs to meet low light illumination of the human retina, high resolution in the retina and reflection free image1. Those constraints make its optical design very sophisticated, but the most difficult to comply with is the reflection free illumination and the final alignment due to the high number of non coaxial optical components in the system. Reflection of the illumination, both in the objective and at the cornea, mask image quality, and a poor alignment make the sophisticated optical design useless. In this work we developed a totally axial optical system for a non-midriatic Fundus Camera. The illumination is performed by a LED ring, coaxial with the optical system and composed of IR of visible LEDs. The illumination ring is projected by the objective lens in the cornea. The Objective, LED illuminator, CCD lens are coaxial making the final alignment easily to perform. The CCD + capture lens module is a CCTV camera with autofocus and Zoom built in, added to a 175 mm focal length doublet corrected for infinity, making the system easily operated and very compact.

MTF measurements on real time for performance analysis of electro-optical systems

The need of methods and tools that assist in determining the performance of optical systems is actually increasing. One of the most used methods to perform analysis of optical systems is to measure the Modulation Transfer Function (MTF). The MTF represents a direct and quantitative verification of the image quality. This paper presents the implementation of the software, in order to calculate the MTF of electro-optical systems. The software was used for calculating the MTF of Digital Fundus Camera, Thermal Imager and Ophthalmologic Surgery Microscope. The MTF information aids the analysis of alignment and measurement of optical quality, and also defines the limit resolution of optical systems. The results obtained with the Fundus Camera and Thermal Imager was compared with the theoretical values. For the Microscope, the results were compared with MTF measured of Microscope Zeiss model, which is the quality standard of ophthalmological microscope.