Jared H. Delcamp

Blue-coloured highly efficient dye-sensitized solar cells by implementing the diketopyrrolopyrrole chromophore.

The paradigm shift in dye sensitized solar cells (DSCs) – towards donor- π bridge-acceptor (D-π-A) dyes – increases the performances of DSCs and challenges established design principles. Framed by this shifting landscape, a series of four diketopyrrolopyrrole (DPP)-based sensitizers utilizing the donor-chromophore-anchor (D-C-A) motif were investigated computationally, spectroscopically, and fabricated by systematic evaluation of finished photovoltaic cells. In all cases, the [Co(bpy)3]3+/2+ redox-shuttle afforded superior performance compared to I3−/I−. Aesthetically, careful molecular engineering of the DPP chromophore yielded the first example of a high-performance blue DSC – a challenge unmet since the inception of this photovoltaic technology: DPP17 yields over 10% power conversion efficiency (PCE) with the [Co(bpy)3]3+/2+ electrolyte at full AM 1.5 G simulated sun light.

Near-infrared sensitization of solid-state dye-sensitized solar cells with a squaraine dye

Here, we report the use of a squaraine-based dye, JD10, as a near-infrared sensitizer for solid-state dye-sensitized solar cells (ssDSCs). Using spiro-MeOTAD as a hole-transport material, JD10 gave the highest reported power conversion efficiencies (PCE), 3.16% for squaraine-based ssDSCs. The photocurrent was further enhanced by co-sensitization with the organic D-π-A dye D35, increasing the light harvested leading to a PCE to 4.42%.

Oxidative Heck Vinylation for the Synthesis of Complex Dienes and Polyenes

We introduce an oxidative Heck reaction for selective complex diene and polyene formation. The reaction proceeds via oxidative Pd(II)/sulfoxide catalysis that retards palladium-hydride isomerizations which previously limited the Heck manifolds capacity for furnishing stereodefined conjugated dienes. Limiting quantities of nonactivated terminal olefins (1 equiv) and slight excesses of vinyl boronic esters (1.5 equiv) that feature diverse functionality can be used to furnish complex dienes and polyenes in good yields and excellent selectivities (generally E:Z = >20:1; internal:terminal = >20:1). Because this reaction only requires prior activation of a single vinylic carbon, improvements in efficiency are observed for synthetic sequences relative to ones featuring reactions that require activation of both coupling partners.

Photocatalytic Reduction of CO2 with Re-Pyridyl-NHCs.

A series of Re(I) pyridyl N-heterocyclic carbene (NHC) complexes have been synthesized and examined in the photocatalytic reduction of CO2 using a simulated solar spectrum. The catalysts were characterized through NMR, UV-vis, cyclic voltammetry under nitrogen, and cyclic voltammetry under carbon dioxide. The complexes were compared directly with a known benchmark catalyst, Re(bpy) (CO)3Br. An electron-deficient NHC substituent (PhCF3) was found to promote catalytic activity when compared with electron-neutral and -rich substituents. Re(PyNHC-PhCF3) (CO)3Br was found to exceed the CO production of the benchmark Re(bpy) (CO)3Br catalyst (51 vs 33 TON) in the presence of electron donor BIH and photosensitizer fac-Ir(ppy)3. Importantly, Re(PyNHC-PhCF3) (CO)3Br was found to function without a photosensitizer (32 TON) at substantially higher turnovers than the benchmark catalyst Re(bpy) (CO)3Br (14 TON) under a solar simulated spectrum.

Thieno[3,4-b]pyrazine as an Electron Deficient π-Bridge in D–A−π–A DSCs

Thieno[3,4-b]pyrazine (TPz) is examined as an electron deficient π-bridge enabling near-infrared (NIR) spectral access in dye-sensitized solar cells (DSCs). Seven dissymmetric dyes for DSCs were synthesized (NL2-NL8) with TPz as the π-bridge utilizing palladium catalyzed C-H activation methodology. C-H bond cross-coupling was uniquely effective among the cross-couplings and electrophilic aromatic substitution reactions analyzed in monofunctionalizing the TPz building block. The TPz-based NL2-NL8 dyes examine the effects of various donors, π-spacers, and acceptors within the donor-π bridge-acceptor (D-π-A) dye design. Proaromatic TPz stabilizes the excited-state oxidation potential (E(s+/s*)) of the dyes by maintaining aromaticity upon excitation of the dye molecule. This leads to concise conjugated systems capable of accessing the NIR region. Through judicious structural modifications, dye band gaps were reduced to 1.48 eV, and power conversion efficiencies (PCEs) reached 7.1% in this first generation TPz-dye series.

Electrocatalytic Reduction of CO2 to CO With Re-Pyridyl-NHCs: Proton Source Influence on Rates and Product Selectivities

A series of four electron-deficient-substituted Re(I) pyridyl N-heterocyclic carbene (pyNHC) complexes have been synthesized, and their electrocatalytic reduction of CO2 has been evaluated by cyclic voltammetry and controlled potential electrolysis experiments. All of the catalysts were evaluated by cyclic voltammetry under inert atmosphere and under CO2 and compared to the known benchmark catalyst Re(bpy)(CO)3Br. Among the four Re-NHC catalysts, Re(pyNHC-PhCF3)(CO)3Br (2) demonstrated the highest catalytic rate (icat/ip)(2) at the first and second reduction events with a value of 4 at the second reduction potential (TOF = 0.8 s(-1)). The rate of catalysis was enhanced through the addition of proton sources (PhOH, TFE, and H2O; TOF up to 100 s(-1); (icat/ip)(2) = 700). Controlled potential electrolysis shows Faradaic efficiencies (FE) for CO production and accumulated charge for the Re(pyNHC-PhCF3)(CO)3Br catalyst exceed those of the benchmark catalyst in the presence of 2 M H2O (92%, 13 C at 1 h versus 61%, 3 C for the benchmark catalyst) under analogous experimental conditions. A peak FE of 100% was observed during electrolysis with Re(pyNHC-PhCF3)(CO)3Br.

Donor–Acceptor–Donor Thienopyrazines via Pd-Catalyzed C–H Activation as NIR Fluorescent Materials

A series of thienopyrazine-based donor–acceptor–donor (D–A–D) near-infrared (NIR) fluorescent compounds were synthesized through a rapid, palladium-catalyzed C–H activation route. The dyes were studied through computational analysis, electrochemical properties analysis, and characterization of their photophysical properties. Large Stokes shifts of approximately 175 nm were observed, which led to near-infrared emission. Computational evaluation shows that the origin of this large Stokes shift is a significant molecular reorganization particularly about the D–A bond. The series exhibits quantum yields of up to φ = >4%, with emission maxima ranging from 725 to 820 nm. The emission is strong in solution, in thin films, and also in isolation at the single-molecule level. Their stable emission at the single-molecule level makes these compounds good candidates for single-molecule photon sources in the near-infrared.

A Computational and Experimental Study of Thieno[3,4‐b]thiophene as a Proaromatic π‐Bridge in Dye‐Sensitized Solar Cells

Four D-π-A dyes (D=donor, A=accpetor) based on a 3,4-thienothiophene π-bridge were synthesized for use in dye-sensitized solar cells (DSCs). The proaromatic building block 3,4-thienothiophene is incorporated to stabilize dye excited-state oxidation potentials. This lowering of the excited-state energy levels allows for deeper absorption into the NIR region with relatively low molecular weight dyes. The influence of proaromatic functionality is probed through a computational analysis of optimized bond lengths and nucleus independent chemical shifts (NICS) for both the ground- and excited- states. To avoid a necessary lowering of the TiO2 semiconductor conduction band (CB) to promote efficient dye-TiO2 electron injection, strong donor functionalities based on triaryl- and diarylamines are employed in the dye designs to raise both the ground- and excited-state oxidation potentials of the dyes. Solubility, aggregation, and TiO2 surface protection are addressed by examining an ethylhexyl alkyl chain in comparison to a simple ethyl chain on the 3,4-thienothiophene bridge. Power conversion efficiencies of up to 7.8 % are observed.

Dimers of Nineteen‐Electron Sandwich Compounds: Crystal and Electronic Structures, and Comparison of Reducing Strengths

The dimers of some Group 8 metal cyclopentadienyl/arene complexes and Group 9 metallocenes can be handled in air, yet are strongly reducing, making them useful n-dopants in organic electronics. In this work, the X-ray molecular structures are shown to resemble those of Group 8 metal cyclopentadienyl/pentadienyl or Group 9 metal cyclopentadienyl/diene model compounds. Compared to those of the model compounds, the DFT HOMOs of the dimers are significantly destabilized by interactions between the metal and the central CC σ-bonding orbital, accounting for the facile oxidation of the dimers. The lengths of these CC bonds (X-ray or DFT) do not correlate with DFT dissociation energies, the latter depending strongly on the monomer stabilities. Ru and Ir monomers are more reducing than their Fe and Rh analogues, but the corresponding dimers also exhibit much higher dissociation energies, so the estimated monomer cation/neutral dimer potentials are, with the exception of that of [RhCp2 ]2 , rather similar (-1.97 to -2.15 V vs. FeCp2 (+/0) in THF). The consequences of the variations in bond strength and redox potentials for the reactivity of the dimers are discussed.

Molecular Design Principles for Near-Infrared Absorbing and Emitting Indolizine Dyes

Desirable components for dye-sensitzed solar cell (DSC) sensitizers and fluorescent imaging dyes include strong donating building blocks coupled with well-balanced acceptor functionalities for absorption beyond the visible range. We have evaluated the effects of increasing acceptor strengths and incorporation of dye morphology controlling groups on molar absorptivity and absorption breadth with indolizine donor-based dyes. Indolizine-based D-A and D-π-A sensitizers incorporating bis-rhodanine, tricyanofuran (TCF), and cyanoacrylic acid functionalities were analyzed for performance in DSC devices. The TCF derivatives were also evaluated as near-infrared (NIR)-emissive materials with the AH25 emissions extending past 1000 nm.