Jayanta Haldar

Polymeric coatings that inactivate both influenza virus and pathogenic bacteria

Painting a glass slide with branched or linear N,N-dodecyl methyl-polyethylenimines (PEIs) and certain other hydrophobic PEI derivatives enables it to kill influenza virus with essentially a 100% efficiency (at least a 4-log reduction in the viral titer) within minutes, as well as the airborne human pathogenic bacteria Escherichia coli and Staphylococcus aureus. For most of the coating polyions, this virucidal action is shown to be on contact, i.e., solely by the polymeric chains anchored to the slide surface; for others, a contribution of the polyion leaching from the painted surface cannot be ruled out. A relationship between the structure of the derivatized PEI and the resultant virucidal activity of the painted surface has been elucidated.

Cleavable Cationic Antibacterial Amphiphiles: Synthesis, Mechanism of Action, and Cytotoxicities

The development of novel antimicrobial agents having high selectivity toward bacterial cells over mammalian cells is urgently required to curb the widespread emergence of infectious diseases caused by pathogenic bacteria. Toward this end, we have developed a set of cationic dimeric amphiphiles (bearing cleavable amide linkages between the headgroup and the hydrocarbon tail with different methylene spacers) that showed high antibacterial activity against human pathogenic bacteria (Escherichia coli and Staphylococcus aureus) and low cytotoxicity. The Minimum Inhibitory Concentrations (MIC) were found to be very low for the dimeric amphiphiles and were lower or comparable to the monomeric counterpart. In the case of dimeric amphiphiles, MIC was found to decrease with the increase in the spacer chain length (n = 2 to 6) and again to increase at higher spacer length (n > 6). It was found that the compound with six methylene spacers was the most active among all of the amphiphiles (MICs = 10-13 μM). By fluorescence spectroscopy, fluorescence microscopy, and field-emission scanning electron microscopy (FESEM), it was revealed that these cationic amphiphiles interact with the negatively charged bacterial cell membrane and disrupt the membrane integrity, thus killing the bacteria. All of the cationic amphiphiles showed low hemolytic activity (HC(50)) and high selectivity against both gram-positive and gram-negative bacteria. The most active amphiphile (n = 6) had a 10-13-fold higher HC(50) than did the MIC. Also, this amphiphile did not show any cytotoxicity against mammalian cells (HeLa cells) even at a concentration above the MIC (20 μM). The critical micellar concentration (CMC) values of gemini surfactants were found to be very low (CMC = 0.30-0.11 mM) and were 10-27 times smaller than the corresponding monomeric analogue (CMC = 2.9 mM). Chemical hydrolysis and thermogravimetric analysis (TGA) proved that these amphiphiles are quite stable under both acidic and thermal conditions. Collectively, these properties make the newly synthesized amphiphiles potentially superior disinfectants and antiseptics for various biomedical and biotechnological applications.

Small Molecular Antibacterial Peptoid Mimics: The Simpler the Better!

The emergence of multidrug resistant bacteria compounded by the depleting arsenal of antibiotics has accelerated efforts toward development of antibiotics with novel mechanisms of action. In this report, we present a series of small molecular antibacterial peptoid mimics which exhibit high in vitro potency against a variety of Gram-positive and Gram-negative bacteria, including drug-resistant species such as methicillin-resistant Staphylococcus aureus and vancomycin-resistant Enterococcus faecium. The highlight of these compounds is their superior activity against the major nosocomial pathogen Pseudomonas aeruginosa. Nontoxic toward mammalian cells, these rapidly bactericidal compounds primarily act by permeabilization and depolarization of bacterial membrane. Synthetically simple and selectively antibacterial, these compounds can be developed into a newer class of therapeutic agents against multidrug resistant bacterial species.

Preparation, application and testing of permanent antibacterial and antiviral coatings

Protocols for the synthesis of the microbicidal polycation N,N-dodecyl,methyl-polyethylenimine and coating (painting) of glass slides with this polycations butanol solution are described. Subsequently detailed are the procedures for validating that the resultant coated slides are essentially 100% lethal to the human bacterial pathogens, Staphylococcus aureus and Escherichia coli, as well as to two common strains of influenza virus. The time required to prepare and apply the cationic polymer and to test its microbicidal efficiency is conservatively estimated to be <4 weeks.

Molecular Modulation of Surfactant Aggregation in Water: Effect of the Incorporation of Multiple Headgroups on Micellar Properties

Surfactant molecules self-organize in water,[1] often producing nearly spherical aggregates called micelles in dilute solutions, and lyotropic mesophases at higher concentrations. The polar headgroups of these aggregates lie near the bulk aqueous phase, whereas the hydrocarbon chains extend inwardly to avoid unfavorable water contacts.

Polymers with tunable side-chain amphiphilicity as non-hemolytic antibacterial agents

Quaternized polymers mimicking the antimicrobial peptides were created by tuning the side-chain amphiphilicity using a first-time approach of post-functionalization. They displayed excellent efficacy against pathogenic bacteria even in human plasma and membrane disruptive mode of action. The optimized polymers and degraded products were non-hemolytic.

Broad Spectrum Antibacterial and Antifungal Polymeric Paint Materials: Synthesis, Structure–Activity Relationship, and Membrane-Active Mode of Action

Microbial attachment and subsequent colonization onto surfaces lead to the spread of deadly community-acquired and hospital-acquired (nosocomial) infections. Noncovalent immobilization of water insoluble and organo-soluble cationic polymers onto a surface is a facile approach to prevent microbial contamination. In the present study, we described the synthesis of water insoluble and organo-soluble polymeric materials and demonstrated their structure-activity relationship against various human pathogenic bacteria including drug-resistant strains such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and beta lactam-resistant Klebsiella pneumoniae as well as pathogenic fungi such as Candida spp. and Cryptococcus spp. The polymer coated surfaces completely inactivated both bacteria and fungi upon contact (5 log reduction with respect to control). Linear polymers were more active and found to have a higher killing rate than the branched polymers. The polymer coated surfaces also exhibited significant activity in various complex mammalian fluids such as serum, plasma, and blood and showed negligible hemolysis at an amount much higher than minimum inhibitory amounts (MIAs). These polymers were found to have excellent compatibility with other medically relevant polymers (polylactic acid, PLA) and commercial paint. The cationic hydrophobic polymer coatings disrupted the lipid membrane of both bacteria and fungi and thus showed a membrane-active mode of action. Further, bacteria did not develop resistance against these membrane-active polymers in sharp contrast to conventional antibiotics and lipopeptides, thus the polymers hold great promise to be used as coating materials for developing permanent antimicrobial paint.

Membrane active vancomycin analogues: a strategy to combat bacterial resistance.

The alarming growth of antibiotic resistant superbugs such as vancomycin-resistant Enterococci and Staphylococci has become a major global health hazard. To address this issue, we report the development of lipophilic cationic vancomycin analogues possessing excellent antibacterial activity against several drug-resistant strains. Compared to vancomycin, efficacy greater than 1000-fold was demonstrated against vancomycin-resistant Enterococci (VRE). Significantly, unlike vancomycin, these compounds were shown to be bactericidal at low concentrations and did not induce bacterial resistance. An optimized compound in the series, compared to vancomycin, showed higher activity in methicillin-resistant Staphylococcus aureus (MRSA) infected mouse model and exhibited superior antibacterial activity in whole blood with no observed toxicity. The remarkable activity of these compounds is attributed to the incorporation of a new membrane disruption mechanism into vancomycin and opens up a great opportunity for the development of novel antibiotics.

Membrane Active Phenylalanine Conjugated Lipophilic Norspermidine Derivatives with Selective Antibacterial Activity

Natural and synthetic membrane active antibacterial agents offer hope as potential solutions to the problem of bacterial resistance as the membrane-active nature imparts low propensity for the development of resistance. In this report norspermidine based antibacterial molecules were developed that displayed excellent antibacterial activity against various wild-type bacteria (Gram-positive and Gram-negative) and drug-resistant bacteria (methicillin-resistant Staphylococcus aureus, vancomycin-resistant Enterococcus faecium, and β-lactam-resistant Klebsiella pneumoniae). In a novel structure-activity relationship study it has been shown how incorporation of an aromatic amino acid drastically improves selective antibacterial activity. Additionally, the effect of stereochemistry on activity, toxicity, and plasma stability has also been studied. These rapidly bactericidal, membrane active antibacterial compounds do not trigger development of resistance in bacteria and hence bear immense potential as therapeutic agents to tackle multidrug resistant bacterial infections.

Membrane-Active Small Molecules: Designs Inspired by Antimicrobial Peptides.

Infectious diseases continue to be one of the major contributors to human morbidity. The rapid rate at which pathogenic microorganisms have developed resistance against frontline antimicrobials has compelled scientists to look for new alternatives. Given their vast antimicrobial repertoire, substantial research effort has been dedicated toward the development of antimicrobial peptides (AMPs) as alternative drugs. However, inherent limitations of AMPs have driven substantial efforts worldwide to develop synthetic mimics of AMPs. This review focuses on the progress that has been made toward the development of small molecules that emulate the properties of AMPs, both in terms of design and biological activity. Herein we provide an extensive discussion of the structural features of various designs and we examine biological properties that have been exploited. Furthermore, we raise a number of questions for which the field has yet to provide solutions and discuss possible future research directions that remain either unexploited or underexploited.