Jean Giess

High-performance long-wavelength HgCdTe infrared detectors grownon silicon substrates

Long-wavelength HgCdTe heterostructures on silicon (100) substrates have been grown using metal-organic vapor phase epitaxy. Test diodes have been fabricated from this material using mesa technology and flip-chip bonding. We have demonstrated excellent resistance-area product characteristics for diodes with a 10.2μm cutoff wavelength. R0A values approaching 103Ωcm2 at 80K have been measured and the resistance-area product maintained above 102Ωcm2 at 1V reverse bias. Variable temperature R0A values correspond to expected generation-recombination loss mechanisms between 60 and 120K. Current-voltage characteristics of two diodes at opposite sides of an array indicate that a very uniform imaging long-wavelength infrared array could be fabricated from this material.

Photomultiplication with low excess noise factor in MWIR to optical fiber compatible wavelengths in cooled HgCdTe mesa diodes

Infrared avalanche diodes are key components in diverse applications such as eye-safe burst illumination imaging systems and quantum cryptography systems operating at telecommunications fiber wavelengths. HgCdTe is a mature infrared detector material tunable over all infrared wavelengths longer than ~850nm. HgCdTe has fundamental properties conducive to producing excellent detectors with low noise gain. The huge asymmetry between the conduction and valence bands in HgCdTe is a necessary starting point for producing impact ionization with low excess noise factor. Other factors in the band structure are also favorable. The low bandgap necessitates at least multi-stage thermoelectric cooling. Mesa diode structures with electron initiated multiplication have been designed for gains of up to around 100 at temperatures at or above 80K. Backside illuminated, flip-chip, test diode arrays have been fabricated by MOVPE using a process identical to that required for producing large imaging arrays. Test diode results have been obtained with the following parameters characterized, dark current vs. voltage and temperature, gain vs. voltage, and spectral response as a function of wavelength and bias. The effect of changing active region cadmium composition and active region doping is presented along with an assessment of some of the trade-offs between dark leakage current, gain, operating voltage and temperature of operation.

Dual-waveband infrared focal plane arrays using MCT grown by MOVPE on silicon substrates (Invited Paper)

Dual-waveband, Focal Plane Arrays (FPAs) based on Hg1-xCdxTe multi-layer structures have previously been produced by the Molecular Beam Epitaxy (MBE) growth technique. It is shown that the multi-layer structures required for dual-waveband devices can also be grown by Metal Organic Vapor Phase Epitaxy (MOVPE). The MOVPE growth process allows excellent control of both the composition and doping profiles and has the advantage of allowing growth on a range of substrates including silicon. Previous research on back-to-back diodes for dual-waveband has concentrated on npn structures. The design of the alternative pnp structures is discussed and a model is developed which gives a good fit to the measured spectra. We report on the design and characterization of dual-waveband detectors including current-voltage and spectral cross talk for the case of two close sub-bands within the 3-5 μm mid-wave infrared (MWIR) spectral range. The mechanisms for spectral cross talk are discussed including incomplete absorption, transistor action and radiative coupling. A custom readout circuit (ROIC) has been designed. This allows the capture of data from the two bands which is spatially aligned but sequential in time.

Long-wavelength HgCdTe on silicon negative luminescent devices

We have investigated the negative luminescent properties of a device fabricated from metalorganic vapor phase epitaxy grown HgCdTe on a Si substrate. The peak emission was at 7.2μm, and the intrinsic Auger processes were found to be very well suppressed. The low currents (minimum current density, Jmin, of 0.84A∕cm2 at 295K) needed to drive these devices makes them suitable for a range of device applications.

Long-wavelength infrared focal plane arrays fabricated from HgCdTe grown on silicon substrates

We have demonstrated the successful growth of mercury cadmium telluride (MCT) infrared detector material on silicon substrates. Growth on silicon increases the maximum achievable array size, reduces manufacturing costs, and paves the way for infrared detector growth directly on multiplexing circuits. In addition, the thermal match with multiplexing circuits eliminates the requirement for complex thinning procedures. Since the crystal lattice of MCT is not matched to that of silicon, an intermediate buffer layer is required. We have developed a buffer layer technique that is compatible with MCT grown by Metal Organic Vapour Phase Epitaxy (MOVPE). Long-wavelength heterostructure device designs were grown using this technique. Test devices and 128x128 focal plane arrays were fabricated by wet etching mesa structures and passivating the mesa side-walls with a thin layer of CdTe. An indium flip-chip technique was used to form interconnects between the detector material and test or multiplexing circuit. At 77K, 50x50μm test devices with a 10.2μm cut off wavelength have been measured with R0A~1x103Ohm cm2 at zero bias and R.A~1x104Ohm cm2 at 0.1V reverse bias. Arrays from this material have been demonstrated with operabilities up to 99.7%.

Long wavelength infrared negative luminescent devices with strong Auger suppression

We have investigated the negative luminescent properties of HgCdTe photodiodes having peak emission at a wavelength of 7.6 μm, as a function of temperature and applied bias. Under reverse bias at room temperature, intrinsic Auger processes are almost fully suppressed. The internal negative luminescence efficiency of ≈85% is nearly independent of temperature in the 240–300 K range, and at 296 K corresponds to an apparent temperature reduction of 43 K. The small currents needed to drive these diodes (as little as 0.7 A/cm2 at 296 K), together with their long-wavelength luminescence, make them suitable for a range of device applications.

Integrated infrared detectors and readout circuits

The standard process for manufacturing mercury cadmium telluride (MCT) infrared focal plane arrays (FPAs) involves hybridising detectors onto a readout integrated circuit (ROIC). Wafer scale processing is used to fabricate both the detector arrays and the ROICs. The detectors are usually made by growing epitaxial MCT on to a suitable substrate, which is then diced and hybridised on to the ROIC. It is this hybridisation process that prevents true wafer scale production; if the MCT could be grown directly onto the ROIC, then wafer scale production of infrared FPAs could be achieved. In order to achieve this, a ROIC compatible with the growth process needs to be designed and fabricated and the growth and processing procedures modified to ensure survival of the ROIC. Medium waveband IR detector test structures have been fabricated with resistance area product of around 3x104 Ω cm2 at 77K. This is background limited in f/2 and demonstrates that wafer scale production is achievable.

Dual waveband MW/LW focal plane arrays grown by MOVPE on silicon substrates

The use of silicon substrates has been very successful for producing large area focal plane arrays operating in the MWIR waveband using the MBE growth process. More recently, promising results have been obtained in the LWIR waveband using a MOVPE growth process on a buffered silicon substrate. The MOVPE growth process is also suitable for more complex multi-layer structures and we have now used this technique to produce our first MW/LW dual waveband focal plane arrays. In this paper we show that close to background limited performance can be achieved in both wavebands, however the main challenge with arrays grown on silicon is to obtain low defect counts. These first arrays are promising in this respect and operabilities of 99.4% and 98.2% have been achieved in the MWIR band and LWIR band respectively. The availability of dual waveband arrays allows the correlation of defects in the two wavebands to be compared. In general, we find that the correlation is low and this suggests that defect generation mechanisms which would affect both bands (such as threading dislocations) are currently not the main source of defective devices in MOVPE grown devices on silicon.

Progress in negative luminescent Hg1-xCdxTe diode arrays

Negative luminescent devices, which absorb more light than they emit when reverse biased, have a large number of applications including, reference planes for thermal cameras, infrared (IR) sources and IR scene projection. This paper describes devices made from mercury cadmium telluride grown on silicon substrates, focusing on large area arrays with reduced operating powers. Novel growth structures and device designs have been investigated in order to reduce the series resistance. Results from the first dry etched, LW MCT on Si, 1 cm2 device with optical concentrators are presented.

Wide-band (2.5 - 10.5 µm), high-frame rate IRFPAs based on high-operability MCT on silicon

We have previously presented results from our mercury cadmium telluride (MCT, Hg1-xCdxTe) growth on silicon substrate technology for different applications, including negative luminescence, long waveband and mid/long dual waveband infrared imaging. In this paper, we review recent developments in QinetiQs combined molecular beam epitaxy (MBE) and metal-organic vapor phase epitaxy (MOVPE) MCT growth on silicon; including MCT defect density, uniformity and reproducibility. We also present a new small-format (128 x 128) focal plane array (FPA) for high frame-rate applications. A custom high-speed readout integrated circuit (ROIC) was developed with a large pitch and large charge storage aimed at producing a very high performance FPA (NETD ~10mK) operating at frame rates up to 2kHz for the full array. The array design allows random addressing and this allows the maximum frame rate to be increased as the window size is reduced. A broadband (2.5-10.5 μm) MCT heterostructure was designed and grown by the MBE/MOVPE technique onto silicon substrates. FPAs were fabricated using our standard techniques; wet-etched mesa diodes passivated with epitaxial CdTe and flip-chip bonded to the ROIC. The resulting focal plane arrays were characterized at the maximum frame rate and shown to have the high operabilities and low NETD values characteristic of our LWIR MCT on silicon technology.