Jeffrey A. Fagan

Spontaneous Partition of Carbon Nanotubes in Polymer-Modified Aqueous Phases

The distribution of nanoparticles in different aqueous environments is a fundamental problem underlying a number of processes, ranging from biomedical applications of nanoparticles to their effects on the environment, health, and safety. Here, we study distribution of carbon nanotubes (CNTs) in two immiscible aqueous phases formed by the addition of polyethylene glycol (PEG) and dextran. This well-defined model system exhibits a strikingly robust phenomenon: CNTs spontaneously partition between the PEG- and the dextran-rich phases according to nanotubes diameter and metallicity. Thermodynamic analysis suggests that this chirality-dependent partition is determined by nanotubes intrinsic hydrophobicity and reveals two distinct regimes in hydrophobicity-chirality relation: a small diameter (<1 nm) regime, where curvature effect makes larger diameter tubes more hydrophobic than small diameter ones, and a large diameter (>1.2 nm) regime, where nanotubes polarizability renders semiconducting tubes more hydrophobic than metallic ones. These findings reveal a general rule governing CNT behaviors in aqueous phase and provide an extremely simple way to achieve spatial separation of CNTs by their electronic structures.

Isolation of Specific Small‐Diameter Single‐Wall Carbon Nanotube Species via Aqueous Two‐Phase Extraction

Aqueous two-phase extraction is demonstrated to enable isolation of single semiconducting and metallic single-wall carbon nanotube species from a synthetic mixture. The separation is rapid and robust, with remarkable tunability via modification of the surfactant environment set for the separation.

CENTRIFUGAL LENGTH SEPARATION OF CARBON NANOTUBES

Separation of single-wall carbon nanotubes (SWCNTs) by length via centrifugation in a high density medium, and the characterization of both the separated fractions and the centrifugation process are presented. Significant quantities of the separated SWCNTs ranging in average length from <50 nm to approximately 2 microm were produced, with the distribution width being coupled to the rate of the separation. Less rapid separation is shown to produce narrower distributions; these length fractions, produced using sodium deoxycholate dispersed SWCNTs, were characterized by UV-visible-near-infrared absorption and fluorescence spectroscopy, dynamic light scattering, Raman scattering, and atomic force microscopy. Several parameters of the separation were additionally explored: SWCNT concentration, added salt concentration, liquid density, rotor speed, surfactant concentration, and the processing temperature. The centrifugation technique is shown to support 10 mg per day scale processing and is applicable to all of the major SWCNT production methods. The cost per unit of the centrifugation-based separation is also demonstrated to be significantly less than size exclusion chromatography-based separations.

Size Separation of Single-Wall Carbon Nanotubes by Flow-Field Flow Fractionation

Flow-field flow fractionation (flow-FFF) is used to separate single wall carbon nanotubes (SWNTs) dispersed in aqueous medium by the use of DNA. Online measurements are made of SWNT concentration, molar mass, and size by using UV-vis absorption and multiangle light scattering (MALS). Separations are made of both unfractionated SWNTs and SWNT fractions made by use of size exclusion chromatography (SEC). The SEC fractions are well resolved by flow-FFF. SWNT hydrodynamic volume from calibrations with polymer latex particles in flow-FFF are compared to calibrations of hydrodynamic volume from the SEC fractions derived from dissolved polymers. Rod lengths of the SWNTs are calculated from online measurements of MALS and those are compared to rod lengths from hydrodynamic models based on latex sphere calibrations. Samples with varied sizes were prepared by fracturing SWNTs through extended sonication. Flow-FFF of these fractured samples shows very broad size distributions compared to the original SEC and flow-FFF fractions.

Measuring Agglomerate Size Distribution and Dependence of Localized Surface Plasmon Resonance Absorbance on Gold Nanoparticle Agglomerate Size Using Analytical Ultracentrifugation

Agglomeration of nanoparticles during measurements in relevant biological and environmental media is a frequent problem in nanomaterial property characterization. The primary problem is typically that any changes to the size distribution can dramatically affect the potential nanotoxicity or other size-determined properties, such as the absorbance signal in a biosensor measurement. Herein we demonstrate analytical ultracentrifugation (AUC) as a powerful method for measuring two critical characteristics of nanoparticle (NP) agglomerates in situ in biological media: the NP agglomerate size distribution, and the localized surface plasmon resonance (LSPR) absorbance spectrum of precise sizes of gold NP agglomerates. To characterize the size distribution, we present a theoretical framework for calculating the hydrodynamic diameter distribution of NP agglomerates from their sedimentation coefficient distribution. We measure sedimentation rates for monomers, dimers, and trimers, as well as for larger agglomerates with up to 600 NPs. The AUC size distributions were found generally to be broader than the size distributions estimated from dynamic light scattering and diffusion-limited colloidal aggregation theory, an alternative bulk measurement method that relies on several assumptions. In addition, the measured sedimentation coefficients can be used in nanotoxicity studies to predict how quickly the agglomerates sediment out of solution under normal gravitational forces, such as in the environment. We also calculate the absorbance spectra for monomer, dimer, trimer, and larger gold NP agglomerates up to 600 NPs, to enable a better understanding of LSPR biosensors. Finally, we validate a new method that uses these spectra to deconvolute the net absorbance spectrum of an unknown bulk sample and approximate the proportions of monomers, dimers, and trimers in a polydisperse sample of small agglomerates, so that every sample does not need to be measured by AUC. These results demonstrate the potential utility of AUC to characterize NP agglomeration and sedimentation for nanotoxicity and biosensor studies, as well as to characterize NP agglomerate size and absorbance to improve LSPR and surface-enhanced Raman spectroscopy based biosensors.

Analyzing Surfactant Structures on Length and Chirality Resolved (6,5) Single-Wall Carbon Nanotubes by Analytical Ultracentrifugation

The structure and density of the bound interfacial surfactant layer and associated hydration shell were investigated using analytical ultracentrifugation for length and chirality purified (6,5) single-wall carbon nanotubes (SWCNTs) in three different bile salt surfactant solutions. The differences in the chemical structures of the surfactants significantly affect the size and density of the bound surfactant layers. As probed by exchange of a common parent nanotube population into sodium deoxycholate, sodium cholate, or sodium taurodeoxycholate solutions, the anhydrous density of the nanotubes was least for the sodium taurodeoxycholate surfactant, and the absolute sedimentation velocities greatest for the sodium cholate and sodium taurodeoxycholate surfactants. These results suggest that the thickest interfacial layer is formed by the deoxycholate, and that the taurodeoxycholate packs more densely than either sodium cholate or deoxycholate. These structural differences correlate well to an observed 25% increase in fluorescence intensity relative to the cholate surfactant for deoxycholate and taurodeoxycholate dispersed SWCNTs displaying equivalent absorbance spectra. Separate sedimentation velocity experiments including the density modifying agent iodixanol were used to establish the buoyant density of the (6,5) SWCNT in each of the bile salt surfactants; from the difference in the buoyant and anhydrous densities, the largest hydrated diameter is observed for sodium deoxycholate. Understanding the effects of dispersant choice and the methodology for measurement of the interfacial density and hydrated diameter is critical for rationally advancing separation strategies and applications of nanotubes.

Isolation of >1 nm Diameter Single-Wall Carbon Nanotube Species Using Aqueous Two-Phase Extraction

In this contribution we demonstrate the effective separation of single-wall carbon nanotube (SWCNT) species with diameters larger than 1 nm through multistage aqueous two-phase extraction (ATPE), including isolation at the near-monochiral species level up to at least the diameter range of SWCNTs synthesized by electric arc synthesis (1.3-1.6 nm). We also demonstrate that refined species are readily obtained from both the metallic and semiconducting subpopulations of SWCNTs and that this methodology is effective for multiple SWCNT raw materials. Using these data, we report an empirical function for the necessary surfactant concentrations in the ATPE method for separating different SWCNTs into either the lower or upper phase as a function of SWCNT diameter. This empirical correlation enables predictive separation design and identifies a subset of SWCNTs that behave unusually as compared to other species. These results not only dramatically increase the range of SWCNT diameters to which species selective separation can be achieved but also demonstrate that aqueous two-phase separations can be designed across experimentally accessible ranges of surfactant concentrations to controllably separate SWCNT populations of very small (∼0.62 nm) to very large diameters (>1.7 nm). Together, the results reported here indicate that total separation of all SWCNT species is likely feasible by the ATPE method, especially given future development of multistage automated extraction techniques.

Tailored Distribution of Single-Wall Carbon Nanotubes from Arc Plasma Synthesis Using Magnetic Fields

We report a method for tuning the distribution of single-wall carbon nanotubes (SWCNTs) produced by the anodic arc production method via the application of nonuniform magnetic fields to the gap region during synthesis. Raman, ultraviolet-visible-near-infrared absorbance and near-infrared fluorescence spectroscopies were used to characterize samples together with scanning electron microscopy. Application of the nonuniform magnetic field 0.2-2 kG results in a broadening of the diameter range of SWCNTs produced toward decreased diameters, with substantial fractions of produced SWCNTs being of small diameter, less than ∼1.3 nm, at the highest field. The ability to tune production of the arc production method may allow for improvement in achievable SWCNT properties.

Electronic durability of flexible transparent films from type-specific single-wall carbon nanotubes.

The coupling between mechanical flexibility and electronic performance is evaluated for thin films of metallic and semiconducting single-wall carbon nanotubes (SWCNTs) deposited on compliant supports. Percolated networks of type-purified SWCNTs are assembled as thin conducting coatings on elastic polymer substrates, and the sheet resistance is measured as a function of compression and cyclic strain through impedance spectroscopy. The wrinkling topography, microstructure and transparency of the films are independently characterized using optical microscopy, electron microscopy, and optical absorption spectroscopy. Thin films made from metallic SWCNTs show better durability as flexible transparent conductive coatings, which we attribute to a combination of superior mechanical performance and higher interfacial conductivity.

Carbon Nanotubes: Measuring Dispersion and Length

Advanced technological uses of single-walled carbon nanotubes (SWCNTs) rely on the production of single length and chirality populations that are currently only available through liquid-phase post processing. The foundation of all of these processing steps is the attainment of individualized nanotube dispersions in solution. An understanding of the colloidal properties of the dispersed SWCNTs can then be used to design appropriate conditions for separations. In many instances nanotube size, particularly length, is especially active in determining the properties achievable in a given population, and, thus, there is a critical need for measurement technologies for both length distribution and effective separation techniques. In this Progress Report, the current state of the art for measuring dispersion and length populations, including separations, is documented, and examples are used to demonstrate the desirability of addressing these parameters.