Jeffrey Bacon

Tomographic Imaging with Cosmic Ray Muons

Over 120 million vehicles enter the United States each year. Many are capable of transporting hidden nuclear weapons or nuclear material. Currently deployed X-ray radiography systems are limited because they cannot be used on occupied vehicles and the energy and dose are too low to penetrate many cargos. We present a new technique that overcomes these limitations by obtaining tomographic images using the multiple scattering of cosmic radiation as it transits each vehicle. When coupled with passive radiation detection, muon interrogation could contribute to safe and robust border protection against nuclear devices or material in occupied vehicles and containers.

Optimizing the Tracking Efficiency for Cosmic Ray Muon Tomography

We have built a detector capable of locating high Z objects in the sampling (middle) region of the detector. As atomic number increases, radiation length rapidly decreases, yielding larger variance in scattering angle. Cosmic ray muon tomography works by tracking muons above the sampling region, and tracking them below the region as well. The difference between the two trajectories yield information, via the muon scattering variance, of the materials contained within the sampling region [Borozdin, K, et al., 2003]. One of most important aspects of cosmic ray tomography is minimizing exposure time. The cosmic ray flux is about 1 cm-2 min-1, and the goal is to use them for detecting high-density materials as quickly as possible. This involves using all of the information possible to reconstruct tracks with redundant detectors. Detector scattering residuals yield a low precision measurement of muon energy. Knowing the rough energy of an incoming particle will yield more precisely the expected scattering variance (currently the expectation value of ~3 GeV is used).

Obtaining material identification with cosmic ray radiography

The passage of muons through matter is dominated by the Coulomb interaction with electrons and nuclei in the matter. The muon interaction with the electrons leads to continuous energy loss and stopping of the muons. The muon interaction with nuclei leads to angular diffusion. Using both stopped muons and angle diffusion interactions allows us to determine density and identify materials. Here we demonstrate material identification using data taken at Los Alamos with a particle tracker built from a set of sealed drift tubes with commercial electronics and software, the Mini Muon Tracker (MMT).

Imaging a nuclear reactor using cosmic ray muons

The passage of muons through matter is dominated by the Coulomb interaction with electrons and nuclei. The muon interaction with electrons leads to continuous energy loss and stopping of the muons. The muon interaction with nuclei leads to angular diffusion. We present experimental images of a nuclear reactor, the AGN-201M reactor at the University of New Mexico, using data measured with a particle tracker built from a set of sealed drift tubes. The data are compared with a geant4 model. In both the data and simulation, we identify specific regions corresponding to elements of the reactor structure, including its core, moderator, and shield.

A multilayer surface detector for ultracold neutrons

Abstract A multilayer surface detector for ultracold neutrons (UCNs) is described. The top 10 B layer is exposed to vacuum and directly captures UCNs. The ZnS:Ag layer beneath the 10 B layer is a few microns thick, which is sufficient to detect the charged particles from the 10 B(n,α) 7 Li neutron-capture reaction, while thin enough that ample light due to α and 7 Li escapes for detection by photomultiplier tubes. A 100-nm thick 10 B layer gives high UCN detection efficiency, as determined by the mean UCN kinetic energy, detector materials, and other parameters. Low background, including negligible sensitivity to ambient neutrons, has also been verified through pulse-shape analysis and comparison with other existing 3 He and 10 B detectors. This type of detector has been configured in different ways for UCN flux monitoring, development of UCN guides and neutron lifetime research.

Cosmic ray muon computed tomography of spent nuclear fuel in dry storage casks

Abstract Radiography with cosmic ray muon scattering has proven to be a successful method of imaging nuclear material through heavy shielding. Of particular interest is monitoring dry storage casks for diversion of plutonium contained in spent reactor fuel. Using muon tracking detectors that surround a cylindrical cask, cosmic ray muon scattering can be simultaneously measured from all azimuthal angles, giving complete tomographic coverage of the cask interior. This paper describes the first application of filtered back projection algorithms, typically used in medical imaging, to cosmic ray muon scattering imaging. The specific application to monitoring spent nuclear fuel in dry storage casks is investigated via GEANT4 simulations. With a cylindrical muon tracking detector surrounding a typical spent fuel cask, simulations indicate that missing fuel bundles can be detected with a statistical significance of ∼ 18 σ in less than two days exposure and a sensitivity at 1σ to a 5% missing portion of a fuel bundle. Potential detector technologies and geometries are discussed.

Detecting special nuclear material using muon-induced neutron emission

Abstract The penetrating ability of cosmic ray muons makes them an attractive probe for imaging dense materials. Here, we describe experimental results from a new technique that uses neutrons generated by cosmic-ray muons to identify the presence of special nuclear material (SNM). Neutrons emitted from SNM are used to tag muon-induced fission events in actinides and laminography is used to form images of the stopping material. This technique allows the imaging of SNM-bearing objects tagged using muon tracking detectors located above or to the side of the objects, and may have potential applications in warhead verification scenarios. During the experiment described here we did not attempt to distinguish the type or grade of the SNM.

A new method for imaging nuclear threats using cosmic ray muons

Muon tomography is a technique that uses cosmic ray muons to generate three dimensional images of volumes using information contained in the Coulomb scattering of the muons. Advantages of this technique are the ability of cosmic rays to penetrate significant overburden and the absence of any additional dose delivered to subjects under study above the natural cosmic ray flux. Disadvantages include the relatively long exposure times and poor position resolution and complex algorithms needed for reconstruction. Here we demonstrate a new method for obtaining improved position resolution and statistical precision for objects with spherical symmetry.

Analysis of the multigroup model for muon tomography based threat detection

We compare different algorithms for detecting a 5 cm tungsten cube using cosmic ray muon technology. In each case, a simple tomographic technique was used for position reconstruction, but the scattering angles were used differently to obtain a density signal. Receiver operating characteristic curves were used to compare images made using average angle squared, median angle squared, average of the squared angle, and a multi-energy group fit of the angular distributions for scenes with and without a 5 cm tungsten cube. The receiver operating characteristic curves show that the multi-energy group treatment of the scattering angle distributions is the superior method for image reconstruction.

Muon trackers for imaging a nuclear reactor

A detector system for assessing damage to the cores of the Fukushima Daiichi nuclear reactors by using cosmic-ray muon tomography was developed. The system consists of a pair of drift-tube tracking detectors of 7.2× 7.2-m2 area. Each muon tracker consists of 6 x-layer and 6 y-layer drift-tube detectors. Each tracker is capable of measuring muon tracks with 12 mrad angular resolutions, and is capable of operating under 50-μ Sv/h radiation environment by removing gamma induced background with a novel time-coincidence logic. An estimated resolution to observe nuclear fuel debris at Fukushima Daiichi is 0.3 m when the core is imaged from outside the reactor building.