Jeffrey H. Kulick

High-resolution liquid-crystal phase grating formed by fringing fields from interdigitated electrodes.

We report the formation of thin anisotropic phase gratings in a nematic liquid-crystalline film by use of lateral (fringing) electric fields induced by transparent interdigitated electrodes. These gratings yield high diffraction efficiency (>30%) with a strong dependence on the readout beam incidence angle. In addition, the formation of a defect wall is observed that has a significant effect on the diffraction properties of the phase grating.

Partial pixels: a three-dimensional diffractive display architecture

We describe in detail the partial pixel architecture that permits the realization of three-dimensional (3-D) displays that are functionally equivalent to a real-time holographic stereogram. This architecture permits the simultaneous presentation of multiple stereoscopic images so that motion parallax is discernible in the resultant 3-D scene. The key innovation of the architecture is that each pixel is subdivided into partial pixels, which in turn can be implemented as individual diffraction gratings. We describe a static display that exhibits a 3-D image with one-dimensional motion parallax, thereby demonstrating key features of the architecture. A variety of partial pixel implementations are discussed that can operate at video frame rates. These include voltage-controlled liquid crystal gratings and binary optic gratings integrated with conventional liquid crystal amplitude modulators. In addition, we describe how the partial pixel architecture can be generalized for the implementation of full-color displays and displays having two-dimensional motion parallax.

Electrostatic and diffraction analysis of a liquid-crystal device utilizing fringing fields: applications to three-dimensional displays

The development and modeling of a liquid-crystal phase grating for real-time diffractive three-dimensional displays are discussed. The system being developed, which is called the ICVision system, utilizes a number of ideas that will result in a rugged, low-power three-dimensional display offering both vertical and horizontal parallax and eventually full color. Fringing fields created between interdigitated electrodes formed on top of VLSI die will induce a diffraction pattern in a thin layer of liquid crystal that will cover the die. A detailed electrostatic and diffraction analysis of liquid-crystal phase-grating regions that will make up the final display is given here. The electrostatic analysis is developed by use of the method of moments. The diffraction analysis is developed by use of rigorous coupled-wave diffraction theory. The numerical results obtrained from the mathematical model are compared with experimental diffraction results from preliminary LCD cells that have been assembled as prototype ICVision devices.The development and modeling of a liquid-crystal phase grating for real-time diffractive three-dimensional displays are discussed. The system being developed, which is called the ICVision system, utilizes a number of ideas that will result in a rugged, low-power three-dimensional display offering both vertical and horizontal parallax and eventually full color. Fringing fields created between interdigitated electrodes formed on top of VLSI die will induce a diffraction pattern in a thin layer of liquid crystal that will cover the die. A detailed electrostatic and diffraction analysis of liquid-crystal phase-grating regions that will make up the final display is given here. The electrostatic analysis is developed by use of the method of moments. The diffraction analysis is developed by use of rigorous coupled-wave diffraction theory. The numerical results obtrained from the mathematical model are compared with experimental diffraction results from preliminary LCD cells that have been assembled as prototype ICVision devices.

Autostereoscopic three-dimensional display based on a micromirror array

A novel approach for three-dimensional (3-D) display systems implemented with a micromirror array was proposed, designed, realized, and tested. The major advantages of this approach include the following: (1) micromirrors are reflective and hence achromatic (panchromatic), (2) a wide variety of displays can be used as image sources, and (3) time multiplexing can be introduced on top of space multiplexing to optimize the viewing zone arrangements. A two-view (left and right) 3-D autostereoscopic display system was first constructed. Left- and right-eye views in the forms of both still and motion 3-D scenes were displayed, and viewers were able to fuse the stereo information. A multiview (two left and two right) 3-D autostereoscopic display system was then simulated.

Demonstration of a novel three-dimensional autostereoscopic display.

We report what we believe is the first static implementation of the partial-pixel architecture, which provides a conceptual framework for the construction of real-time three-dimensional displays that are functionally equivalent to holographic stereograms (i.e., the simultaneous display of a series of stereoscopic images). The device is physically realized as a set of amplitude diffraction gratings on a chrome mask that was fabricated by standard photolithographic techniques. The intended three-dimensional object encoded in the display was strikingly visible on readout with an incoherent illumination source.

Liquid crystal-on-silicon implementation of the partial pixel three-dimensional display architecture

We report the implementation of a liquid crystal-on-silicon, three-dimensional (3-D) diffractive display based on the partial pixel architecture. The display generates multiple stereoscopic images that are perceived as a static 3-D scene with one-dimensional motion parallax in a manner that is functionally equivalent to a holographic stereogram. The images are created with diffraction gratings formed in a thin liquid crystal layer by fringing electric fields from transparent indium tin oxide interdigitated electrodes. The electrodes are controlled by an external drive signal that permits the 3-D scene to be turned on and off. The display has a contrast ratio of 5.8, which is limited principally by optical scatter caused by extraneous fringing fields. These scatter sources can be readily eliminated. The display reported herein is the first step toward a real-time partial pixel architecture display in which large numbers of dynamic gratings are independently controlled by underlying silicon drive circuitry.

Real-time three-dimensional display based on the partial pixel architecture.

We previously reported several static three-dimensional (3-D) display implementations of the partial pixel architecture [J. Opt. Soc. Am. A 12, 73 (1995)]. We report herein our f irst real-time 3-D display based on this architecture. The display is functionally equivalent to a real-time holographic stereogram. It is autostereoscopic and provides horizontal motion parallax. The display device is composed of a diffractive optical element (fabricated with standard photolithographic techniques) and a separate conventional liquidcrystal display. The display has been used to play back a precomputed animated 3-D scene at video frame rates using a standard VGA video output.

ICVision: a VLSI-based diffractive display for real-time display of holographic stereograms

The ICVision system is a diffractive display based on VLSI technology. It is designed to display holographic stereograms in real-time. The diffractive display is formed on the surface of standard integrated circuit chips which have been covered with a liquid crystal overlay. Fringing electrostatic fields generated by indium tin oxide electrodes on top of the integrated circuit are used to induce the actual diffractive display. Within the individual IC die making up the display will be computational engines that compute the image to be displayed. Because grating information is encoded in the ITO gratings at the time of chip fabrication, the actual real-time computation is several orders of magnitude less than previous approaches. A large display may be formed by a tessellation of several hundred IC die, each approximately 1 cm2, on a flat substrate. An optical broadcast system would be used to transfer imagery information into the integrated circuits, obviating the need for wire bond attachments. This paper presents details of the overall architecture of the display system, and details of the holographic grating computations.

THREE-DIMENSIONAL DISPLAY UTILIZING A DIFFRACTIVE OPTICAL ELEMENT AND AN ACTIVE MATRIX LIQUID CRYSTAL DISPLAY

We describe the design, construction, and performance of the first real-time autostereoscopic three-dimensional (3-D) display based on the partial pixel 3-D display architecture. The primary optical components of the 3-D display are an active-matrix liquid crystal display and a diffractive optical element (DOE). The display operates at video frame rates and is driven with a conventional VGA signal. Three-dimensional animations with horizontal motion parallax are readily viewable as sets of stereo images. Formation of the virtual viewing slits by diffraction from the partial pixel apertures is experimentally verified. The measured contrast and perceived brightness of the display are excellent, but there are minor flaws in image quality due to secondary images. The source of these images and how they may be eliminated is discussed. The effects of manufacturing-related systematic errors in the DOE are also analyzed.

The simultaneous optical multiprocessor exchange bus

Low latency, high bandwidth interconnection networks that directly link arbitrary pairs of processing elements without contention are very desirable for parallel computers. Most communication networks in parallel machines have made compromises due to the limitations of electronics. Many of the optical interconnection schemes proposed have simply replaced the point-to-point copper wiring with fiber optics and have not made use of the unique properties of optics. This paper proposes an optical interconnect architecture for over a hundred processors, which contains a dedicated channel for each processor to eliminate global arbitration and to provide bandwidth that scales with the number of processors in the machine. Unlike electrical buses, this architecture is not limited by the medium (fiber optics) used to connect the transmitters and receivers. Each processor has an array of receivers, one receiver for each processor channel. The architecture of the receiver array permits a variety of different parallel programming models to be efficiently supported.