Jennifer Fiegel

Synthesis, surface properties, and biocompatibility of 1,2,3-triazole- containing alkyl β-D-xylopyranoside surfactants

We are interested in the development of surfactants derived from hemicellulosic biomass, as they are potential components in pharmaceuticals, personal care products, and other detergents. Such surfactants should exhibit low toxicity in mammalian cells. In this study we synthesized a series of alkyl or fluoroalkyl β-xylopyranosides from azides and an alkyne using the copper-catalyzed azide-alkyne (CuAAC) click reaction in 4 steps from xylose. The purified products were evaluated for both their surfactant properties, and for their biocompatibility. Unlike other carbohydrate-based surfactants, liquid-crystalline behavior was not observed by differential scanning calorimetry. The triazole-containing β-xylopyranosides with short (6 carbons) and long (>12 carbons) chains exhibited no toxicity at concentrations ranging from 1 to 1000 μM. Triazole-containing β-xylopyranosides with 8, 10, or 12 carbons caused toxicity via apoptosis, with CC50 values ranging from 26-890 μM. The two longest chain compounds did form stable monolayers at the air-water interface over a range of temperatures, although a brief transition to an the unstable monolayer was observed.

Bovine serum albumin adsorption on SiO2 and TiO2 nanoparticle surfaces at circumneutral and acidic pH: A tale of two nano-bio surface interactions

The interaction of a model protein, bovine serum albumin (BSA) with two different metal oxide nanoparticles, TiO2 (∼22nm) and SiO2 (∼14nm), was studied at both physiological and acidic pH. The pH- and nanoparticle-dependent differences in protein structure and protein adsorption were determined using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). The results indicated that the surface coverage of BSA decreases with decreasing pH on both TiO2 and SiO2 surfaces, and BSA coverage is higher by a factor of ca. 3-10times more on TiO2 compared to SiO2. The secondary structure of BSA changes upon adsorption to either nanoparticle surface at both pH 7.4 and 2. At acidic pH, BSA appears to completely unfold on TiO2 nanoparticles whereas it assumes an extended conformation on SiO2. These differences highlight for the first time the extent to which the protein corona structure is significantly impacted by protein-nanoparticle interactions which depend on the interplay between pH and specific nanoparticle surface chemistry.

Disruption of Phosphatidylcholine Monolayers and Bilayers by Perfluorobutane Sulfonate

Perfluoroalkyl acids (PFAAs) are persistent environmental contaminants resistant to biological and chemical degradation due to the presence of carbon-fluorine bonds. These compounds exhibit developmental toxicity in vitro and in vivo. The mechanisms of toxicity may involve partitioning into lipid bilayers. We investigated the interaction between perfluorobutane sulfonate (PFBS), an emerging PFAA, and model phosphatidylcholine (PC) lipid assemblies (i.e., dimyristoyl-, dipalmitoyl- and distearoylphosphatidylcholine) using fluorescence anisotropy and Langmuir monolayer techniques. PFBS decreased the transition temperature and transition width of PC bilayers. The apparent membrane partition coefficients ranged from 4.9 × 10(2) to 8.2 × 10(2). The effects on each PC were comparable. The limiting molecular area of PC monolayers increased, and the surface pressure at collapse decreased in a concentration-dependent manner. The compressibility of all three PCs was decreased by PFBS. In summary, PFBS disrupted different model lipid assemblies, indicating potential for PFBS to be a human toxicant. However, the effects of PFBS are not as pronounced as those seen with longer chain PFAAs.

Nutrient dispersion enhances conventional antibiotic activity against Pseudomonas aeruginosa biofilms

Bacterial biofilms cause significant infections in the medical field. Antibiotics commonly used to treat these infections often do not achieve complete bacterial eradication. New approaches to eliminate biofilms have focused on dispersion compounds to entice the bacteria to actively escape or disperse from the biofilm, where the bacteria may become more susceptible to antibiotics. The aim of this study was to demonstrate that combining antibiotics with nutrient dispersion compounds can synergistically decrease the viability of Pseudomonas aeruginosa biofilms. The effects of various co-treatments were studied on mature biofilms through qualitative and quantitative confocal microscopy. Combined treatment of P. aeruginosa biofilms with antibiotic and dispersion compounds resulted in a significant reduction in the live bacterial population compared with the untreated control in all cases, with four combinations displaying synergistic action (citrate with amikacin disulphate, colistin methanesulphonate or erythromycin, and succinic acid with colistin methanesulphonate).

Interaction of Dipalmitoyl Phosphatidylcholine Monolayers with a Particle-Laden Subphase

Recent interest in using submicrometer particles for industrial and therapeutic purposes has led to concerns about their interactions with biological membranes. The mechanisms of particle-membrane interactions are not well understood resulting in contradictory reports on the effects of particles on membrane interfacial properties. In this study, the interactions between negatively charged polystyrene particles (200 nm) and monolayers of dipalmitoyl phosphatidylcholine (DPPC) were investigated. Surface pressure, surface potential, and surfactant microstructure studies were conducted to monitor the interfacial properties of DPPC monolayers spread on a subphase in which particles were dispersed. At a concentration of 0.1 g/L, particles caused a partial collapse of the monolayer. DPPC monolayers spread on a particle-laden subphase also exhibited higher surface potential and increased ratio of ordered domains supporting the presence of a more compact monolayer. These results suggest that particles penetrated the air-water interface thereby altering monolayer packing at the interface. These findings are contrary to our previous work where particles injected into the subphase beneath a DPPC monolayer did not penetrate the interface confirming that the sequence of particle and monolayer addition can alter particle-monolayer interactions. These studies may partially explain the varying results reported in previous studies.

Adsorption of bovine serum albumin on silicon dioxide nanoparticles: Impact of pH on nanoparticle–protein interactions

Bovine serum albumin (BSA) adsorbed on amorphous silicon dioxide (SiO2) nanoparticles was studied as a function of pH across the range of 2 to 8. Aggregation, surface charge, surface coverage, and protein structure were investigated over this entire pH range. SiO2 nanoparticle aggregation is found to depend upon pH and differs in the presence of adsorbed BSA. For SiO2 nanoparticles truncated with hydroxyl groups, the largest aggregates were observed at pH 3, close to the isoelectric point of SiO2 nanoparticles, whereas for SiO2 nanoparticles with adsorbed BSA, the aggregate size was the greatest at pH 3.7, close to the isoelectric point of the BSA-SiO2 complex. Surface coverage of BSA was also the greatest at the isoelectric point of the BSA-SiO2 complex with a value of ca. 3u2009±u20091u2009×u20091011 molecules cm-2. Furthermore, the secondary protein structure was modified when compared to the solution phase at all pH values, but the most significant differences were seen at pH 7.4 and below. It is concluded that protein-nanoparticle interactions vary with solution pH, which may have implications for nanoparticles in different biological fluids (e.g., blood, stomach, and lungs).

Enhanced analysis of bacteria susceptibility in connected biofilms

A common method for visualizing bacterial biofilms is through confocal laser scanning microscopy images. Current software packages separate connected-biofilm bacteria from unconnected bacteria, such as planktonic or dispersed bacteria, but do not save both image sequences, making interpretation of the two bacterial populations difficult. Thus we report the development of an algorithm to save separate image sequences and enable qualitative and quantitative evaluation of each bacterial population. To improve bacterial viability assessment using a membrane integrity dye, a colocalization algorithm was also developed. This assigns colocalized pixels to the dead bacteria population, rather than to both the live and dead bacteria groups. Visually, this makes it clearer to distinguish a green live bacteria pixel from a yellow colocalized dead bacteria pixel. This algorithm also aids in the quantification of viability for connected-biofilm bacteria and unconnected bacteria to investigate susceptibility of each population to antimicrobials. The utility of these algorithms was demonstrated with Pseudomonas aeruginosa biofilms treated with ciprofloxacin hydrochloride. Results from this study indicate that quantification with colocalization adjustment can prevent underestimation of dead bacteria. These improvements in image processing will enable researchers to visually differentiate connected-biofilm and unconnected bacteria in a single image and to quantify these populations independently for viability without double counting the colocalized image pixels.

Quantification of confocal images of biofilms grown on irregular surfaces.

Bacterial biofilms grow on many types of surfaces, including flat surfaces such as glass and metal and irregular surfaces such as rocks, biological tissues and polymers. While laser scanning confocal microscopy can provide high-resolution images of biofilms grown on any surface, quantification of biofilm-associated bacteria is currently limited to bacteria grown on flat surfaces. This can limit researchers studying irregular surfaces to qualitative analysis or quantification of only the total bacteria in an image. In this work, we introduce a new algorithm called modified connected volume filtration (MCVF) to quantify bacteria grown on top of an irregular surface that is fluorescently labeled or reflective. Using the MCVF algorithm, two new quantification parameters are introduced. The modified substratum coverage parameter enables quantification of the connected-biofilm bacteria on top of the surface and on the imaging substratum. The utility of MCVF and the modified substratum coverage parameter were shown with Pseudomonas aeruginosa and Staphylococcus aureus biofilms grown on human airway epithelial cells. A second parameter, the percent association, provides quantified data on the colocalization of the bacteria with a labeled component, including bacteria within a labeled tissue. The utility of quantifying the bacteria associated with the cell cytoplasm was demonstrated with Neisseria gonorrhoeae biofilms grown on cervical epithelial cells. This algorithm provides more flexibility and quantitative ability to researchers studying biofilms grown on a variety of irregular substrata.

Controlled Transport for Pulmonary Drug Delivery

Interactions between inhaled particles and the respiratory tract fluids are important for inhaled drug delivery systems. In particular, controlling the transport of aerosol particles after deposition in the respiratory tract may improve drug retention time in the lungs, allow targeting, and facilitate optimal transport through innate defense mechanisms of the lung. In this chapter the mechanisms by which particles can transport in the lungs and the aerosol design criteria for improving particle residence times or promoting uniform distribution across or within the lung space are discussed.

Dry powder aerosols to co-deliver antibiotics and nutrient dispersion compounds for enhanced bacterial biofilm eradication

The purpose of this study was to formulate a dry powder for inhalation containing a combination treatment for eradication of Pseudomonas aeruginosa bacterial biofilms. Dry powders containing an antibiotic (ciprofloxacin hydrochloride, CH) and nutrient dispersion compound (glutamic acid, GA) at a ratio determined to eliminate the biofilms were generated by spray drying. Leucine was added to the spray dried formulation to aid powder flowability. A central composite design of experiments was performed to determine the effects of solution and processing parameters on powder yield and aerodynamic properties. Combinations of CH and GA eradicated bacterial biofilms at lower antibiotic concentrations compared to CH alone. Spray dried powders were produced with yields up to 43% and mass mean aerodynamic diameters (MMAD) in the respirable range. Powder yield was primarily affected by variables that determine cyclone efficiency, i.e. atomizer and solution flow rates and solution concentration; while MMAD was mainly determined by solution concentration. Fine particle fractions (FPF)<4.46μm and <2.82μm of the powders ranged from 56 to 70% and 35 to 46%, respectively. This study demonstrates that dry powder aerosols containing high concentrations of a combination treatment effective against P. aeruginosa biofilms could be developed with high yield, aerodynamic properties appropriate for inhalation, and no loss of potency.