Jennifer M. Seiter

Practical considerations for conducting ecotoxicity test methods with manufactured nanomaterials: what have we learnt so far?

This review paper reports the consensus of a technical workshop hosted by the European network, NanoImpactNet (NIN). The workshop aimed to review the collective experience of working at the bench with manufactured nanomaterials (MNMs), and to recommend modifications to existing experimental methods and OECD protocols. Current procedures for cleaning glassware are appropriate for most MNMs, although interference with electrodes may occur. Maintaining exposure is more difficult with MNMs compared to conventional chemicals. A metal salt control is recommended for experiments with metallic MNMs that may release free metal ions. Dispersing agents should be avoided, but if they must be used, then natural or synthetic dispersing agents are possible, and dispersion controls essential. Time constraints and technology gaps indicate that full characterisation of test media during ecotoxicity tests is currently not practical. Details of electron microscopy, dark-field microscopy, a range of spectroscopic methods (EDX, XRD, XANES, EXAFS), light scattering techniques (DLS, SLS) and chromatography are discussed. The development of user-friendly software to predict particle behaviour in test media according to DLVO theory is in progress, and simple optical methods are available to estimate the settling behaviour of suspensions during experiments. However, for soil matrices such simple approaches may not be applicable. Alternatively, a Critical Body Residue approach may be taken in which body concentrations in organisms are related to effects, and toxicity thresholds derived. For microbial assays, the cell wall is a formidable barrier to MNMs and end points that rely on the test substance penetrating the cell may be insensitive. Instead assays based on the cell envelope should be developed for MNMs. In algal growth tests, the abiotic factors that promote particle aggregation in the media (e.g. ionic strength) are also important in providing nutrients, and manipulation of the media to control the dispersion may also inhibit growth. Controls to quantify shading effects, and precise details of lighting regimes, shaking or mixing should be reported in algal tests. Photosynthesis may be more sensitive than traditional growth end points for algae and plants. Tests with invertebrates should consider non-chemical toxicity from particle adherence to the organisms. The use of semi-static exposure methods with fish can reduce the logistical issues of waste water disposal and facilitate aspects of animal husbandry relevant to MMNs. There are concerns that the existing bioaccumulation tests are conceptually flawed for MNMs and that new test(s) are required. In vitro testing strategies, as exemplified by genotoxicity assays, can be modified for MNMs, but the risk of false negatives in some assays is highlighted. In conclusion, most protocols will require some modifications and recommendations are made to aid the researcher at the bench.

Simultaneous dispersion-dissolution behavior of concentrated silver nanoparticle suspensions in the presence of model organic solutes.

The premise of the nanotechnology revolution is based on the increased surface reactivity of nanometer-sized particles. Thus, these newly realized applications of noble metal nanoparticles introduce new concerns about the environmental fate of these materials if released during use or product disposal. In this paper, the focus is on silver nanoparticles, a known biocidal agent. In particular, this work explores the effect of model solutes chosen for their simple chemical structure yet their ability to simulate chemical attributes common to soil humic material: a chelating molecule, EDTA; a nonionic surfactant, Brij 35; and a large polysaccharide, alginic acid. Batch systems containing concentrated (1600 mg L(-1)) silver nanoparticle (nAg) suspensions were equilibrated with varying additions of EDTA, Brij 35, or alginic acid to solutions containing 1 or 100 mM NaNO3 background electrolyte. In general, both EDTA and alginate were shown to exhibit poor control over nAg dispersion stability, while Brij 35 served as a good dispersant of nAg particles, showing little difference in particle size with respect to electrolyte concentration. The data also show that loading of the model organic compounds resulted in the supersaturation of dissolved Ag for most of the systems. Mechanisms by which these occurred are discussed in more detail. The evidence suggests that regardless of the effect of humics on the stability of nAg dispersions in aqueous systems, polymer loading may enhance the dissolution and release of dissolved Ag into the environment.

Geochemical investigations of metals release from submerged coal fly ash using extended elutriate tests

A storage pond dike failure occurred at the Tennessee Valley Authority Kingston Fossil Plant that resulted in the release of over 3.8 million cubic meters (5 million cubic yards) of fly ash. Approximately half of this material deposited in the main channel of the Emory River, 3.5 km upstream of the confluence of the Emory and Clinch Rivers, Tennessee, USA. Remediation efforts to date have focused on targeted removal of material from the channel through hydraulic dredging, as well as mechanical excavation in some areas. The agitation of the submerged fly ash during hydraulic dredging introduces river water into the fly ash material, which could alter the redox state of metals present in the fly ash and thereby change their sorption and mobility properties. A series of extended elutriate tests were used to determine the concentration and speciation of metals released from fly ash. Results indicated that arsenic and selenium species released from the fly ash materials during elutriate preparation were redox stable over the course of 10d, with dissolved arsenic being present as arsenate, and dissolved selenium being present as selenite. Concentrations of certain metals, such as arsenic, selenium, vanadium, and barium, increased in the elutriate waters over the 10d study, whereas manganese concentrations decreased, likely due to oxidation and precipitation reactions.

Mechanical properties and structure of the biological multilayered material system, Atractosteus spatula scales.

During recent decades, research on biological systems such as abalone shell and fish armor has revealed that these biological systems employ carefully arranged hierarchical multilayered structures to achieve properties of high strength, high ductility and light weight. Knowledge of such structures may enable pathways to design bio-inspired materials for various applications. This study was conducted to investigate the spatial distribution of structure, chemical composition and mechanical properties in mineralized fish scales of the species Atractosteus spatula. Microindentation tests were conducted, and cracking patterns and damage sites in the scales were examined to investigate the underlying protective mechanisms of fish scales under impact and penetration loads. A difference in nanomechanical properties was observed, with a thinner, stiffer and harder outer layer (indentation modulus ∼69 GPa and hardness ∼3.3 GPa) on a more compliant and thicker inner layer (indentation modulus ∼14.3 GPa and hardness ∼0.5 GPa). High-resolution scanning electron microscopy imaging of a fracture surface revealed that the outer layer contained oriented nanorods embedded in a matrix, and that the nanostructure of the inner layer contained fiber-like structures organized in a complex layered pattern. Damage patterns formed during microindentation show complex deformation mechanisms. Images of cracks identify growth through the outer layer, then deflection along the interface before growing and arresting in the inner layer. High-magnification images of the crack tip in the inner layer show void-linking and fiber-bridging exhibiting inelastic behavior. The observed difference in mechanical properties and unique nanostructures of different layers may have contributed to the resistance of fish scales to failure by impact and penetration loading.

Synchrotron-Based Imaging of Chromium and γ-H2AX Immunostaining in the Duodenum Following Repeated Exposure to Cr(VI) in Drinking Water

Current drinking water standards for chromium are for the combined total of both hexavalent and trivalent chromium (Cr(VI) and Cr(III)). However, recent studies have shown that Cr(III) is not carcinogenic to rodents, whereas mice chronically exposed to high levels of Cr(VI) developed duodenal tumors. These findings may suggest the need for environmental standards specific for Cr(VI). Whether the intestinal tumors arose through a mutagenic or non-mutagenic mode of action (MOA) greatly impacts how drinking water standards for Cr(VI) are derived. Herein, X-ray fluorescence (spectro)microscopy (µ-XRF) was used to image the Cr content in the villus and crypt regions of duodena from B6C3F1 mice exposed to 180 mg/l Cr(VI) in drinking water for 13 weeks. DNA damage was also assessed by γ-H2AX immunostaining. Exposure to Cr(VI) induced villus blunting and crypt hyperplasia in the duodenum—the latter evidenced by lengthening of the crypt compartment by ∼2-fold with a concomitant 1.5-fold increase in the number of crypt enterocytes. γ-H2AX immunostaining was elevated in villi, but not in the crypt compartment. µ-XRF maps revealed mean Cr levels >30 times higher in duodenal villi than crypt regions; mean Cr levels in crypt regions were only slightly above background signal. Despite the presence of Cr and elevated γ-H2AX immunoreactivity in villi, no aberrant foci indicative of transformation were evident. These findings do not support a MOA for intestinal carcinogenesis involving direct Cr-DNA interaction in intestinal stem cells, but rather support a non-mutagenic MOA involving chronic wounding of intestinal villi and crypt cell hyperplasia.

Tungsten Toxicity, Bioaccumulation, and Compartmentalization into Organisms Representing Two Trophic Levels

Metallic tungsten has civil and military applications and was considered a green alternative to lead. Recent reports of contamination in drinking water and soil have raised scrutiny and suspended some applications. This investigation employed the cabbage Brassica oleracae and snail Otala lactea as models to determine the toxicological implications of sodium tungstate and an aged tungsten powder-spiked soil containing monomeric and polymeric tungstates. Aged soil bioassays indicated cabbage growth was impaired at 436 mg of W/kg, while snail survival was not impacted up to 3793 mg of W/kg. In a dermal exposure, sodium tungstate was more toxic to the snail, with a lethal median concentration of 859 mg of W/kg. While the snail significantly bioaccumulated tungsten, predominately in the hepatopancreas, cabbage leaves bioaccumulated much higher concentrations. Synchrotron-based mapping indicated the highest levels of W were in the veins of cabbage leaves. Our results suggest snails consuming contaminated cabbage accumulated higher tungsten concentrations relative to the concentrations directly bioaccumulated from soil, indicating the importance of robust trophic transfer investigations. Finally, synchrotron mapping provided evidence of tungsten in the inner layer of the snail shell, suggesting potential use of snail shells as a biomonitoring tool for metal contamination.

Duodenal crypt health following exposure to Cr(VI): Micronucleus scoring, γ-H2AX immunostaining, and synchrotron X-ray fluorescence microscopy.

Lifetime exposure to high concentrations of hexavalent chromium [Cr(VI)] in drinking water results in intestinal damage and an increase in duodenal tumors in B6C3F1 mice. To assess whether these tumors could be the result of a direct mutagenic or genotoxic mode of action, we conducted a GLP-compliant 7-day drinking water study to assess crypt health along the entire length of the duodenum. Mice were exposed to water (vehicle control), 1.4, 21, or 180 ppm Cr(VI) via drinking water for 7 consecutive days. Crypt enterocytes in Swiss roll sections were scored as normal, mitotic, apoptotic, karyorrhectic, or as having micronuclei. A single oral gavage of 50mg/kg cyclophosphamide served as a positive control for micronucleus induction. Exposure to 21 and 180 ppm Cr(VI) significantly increased the number of crypt enterocytes. Micronuclei and γ-H2AX immunostaining were not elevated in the crypts of Cr(VI)-treated mice. In contrast, treatment with cyclophosphamide significantly increased numbers of crypt micronuclei and qualitatively increased γ-H2AX immunostaining. Synchrotron-based X-ray fluorescence (XRF) microscopy revealed the presence of strong Cr fluorescence in duodenal villi, but negligible Cr fluorescence in the crypt compartment. Together, these data indicate that Cr(VI) does not adversely effect the crypt compartment where intestinal stem cells reside, and provide additional evidence that the mode of action for Cr(VI)-induced intestinal cancer in B6C3F1 mice involves chronic villous wounding resulting in compensatory crypt enterocyte hyperplasia.

Analysis of munitions constituents in IMX formulations by HPLC and HPLC-MS.

The use of Insensitive Munitions eXplosives (IMX) is increasing as the Army seeks to replace certain conventional munitions constituents, such as 2,4,6-trinitrotolene (TNT), for improved safety. The IMX formulations are more stable and therefore less prone to accidental detonation while designed to match the performance of legacy materials. Two formulations, IMX 101 and 104 are being investigated as a replacement for TNT in artillery rounds and composition B Army mortars, respectively. The chemical formulations of IMX-101 and 104 are comprised of four constituents;2,4-dinitroanisole (DNAN), 3-nitro-1,2,4-triazol-5-one (NTO), 1-nitroguanidine (NQ), and Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) which are mixed in various ratios to achieve the desired performance. The current work details the analysis of the IMX constituents by single column HPLC-UV-ESI-MS. Detection limits determined are in agreement with similar HPLC analysis of compounds, ranging from 7 to 9μg/L. Gradient mobile phases are used to allow separation of the 4 target compounds in more complex mixture of other concomitant compounds. Mass spectra are used to confirm analyte identity with chromatographic retention time.

Exploring the ability of cations to facilitate binding between inorganic oxyanions and humic acid

The mobility and fate of inorganic oxyanions in the environment can be greatly influenced by interactions with natural organic matter (NOM). There is increasing evidence that this interaction between two anionic species is facilitated by cationic bridges, but detailed mechanistic studies into this system are challenging due to the heterogeneous nature of NOM. This work examines the ability of cations (FeIII, CrIII, AlIII, or GaIII) to form ternary complexes with Suwannee River humic acid (SRHA) and the oxyanions of As (AsIII and AsV) and Se (SeIV and SeVI). Complexes were characterized by separating SRHA from unbound species using size exclusion chromatography coupled to ICP-MS to determine its metal content. Unlike CrIII and FeIII, the post-transition metal ions AlIII and GaIII proved ineffective at forming ternary complexes with any of the oxyanions, although minor complexation was observed with GaIII, suggesting that electrostatic interactions are not the primary driving force behind the stabilization of these ternary complexes. The results also show differences in the behavior of FeIII and CrIII that may indicate that the two cations stabilize the ternary complexes by different mechanisms.

Stability of solid-phase selenium species in fly ash after prolonged submersion in a natural river system.

Selenium (Se) chemistry can be very complex in the natural environment, exhibiting different valence states (-2, 0, +4, +6) representing multiple inorganic, methylated, or complexed forms. Since redox associated shifts among most of known Se species can occur at environmentally relevant conditions, it is important to identify these species in order to assess their potential toxicity to organisms. In June of 2009, researchers from the US Army Engineer Research & Development Center (ERDC) conducted investigations of the fly ash spilled 6 months previously into the Emory River at the TVA Kingston Fossil Plant, TN. Ash samples were collected on site from both the original ash pile (that did not move during the levee failure), from the spill zone (including the Emory River), and from the ash recovery ditch (ARD) containing ash removed during dredging cleanup operations. The purpose of this work was to determine the state of Se in the spilled fly ash and to assess its potential for transformation and resultant chemical stability from its prolonged submersion in the river and subsequent dredging. Sequential chemical extractions suggested that the river environment shifted Se distribution toward organic/sulfide species. Speciation studies by bulk XANES analysis on fly ash samples showed that a substantial portion of the Se in the original ash pile had transformed from inorganic selenite to a mixture of Se sulfide and reduced (organo)selenium (Se(-II)) species over the 6-month period. μ-XRF mapping data showed that significant trends in the co-location of Se domains with sulfur and ash heavy metals. Ten-d extended elutriate tests (EETs) that were bubbled continuously with atmospheric air to simulate worst-case oxidizing conditions during dredging showed no discernible change in the speciation of fly ash selenium. The enhanced stability of the organo- and sulfide-selenium species coincided with the mixture of the ash material with humic materials in the river, corresponding with notable shifts in the ash carbon- and nitrogen-functionality.