Jennifer Zhang

Identification of isomerization and racemization of aspartate in the Asp–Asp motifs of a therapeutic protein

A thermally stressed Fab molecule showed a significant increase of basic variants in imaged capillary isoelectric focusing (iCIEF) analysis. Mass analyses of the reduced protein found an increase in -18Da species from both light chain and heavy chain. A tryptic peptide map identified two isoAsp-containing peptides, both containing Asp-Asp motifs and located in complementarity-determining regions (CDRs) of light chains and heavy chains, respectively. The approaches of hydrolyzing succinimide in H(2)(18)O followed by tryptic digestion were used to label and identify the sites of isomerization. This method enabled identification of the isomerization site by comparing the MS/MS spectra of isomerized peptides with and without (18)O incorporation. The light chain peptide L2 VTITCITSTDID(12)DDMNWYQQKPGK underwent simultaneous isomerization and recemization at residue Asp-12 after thermal stress as evidenced by the coinjection of synthetic peptide L2 with l-Asp-12, l-isoAsp-12, d-Asp-12, and d-isoAsp-12, respectively. A thermal stress study of the synthetic peptide (l-)L2 showed that the isomerization and racemization did not occur, indicating that the Asp degradation in this Asp-Asp motif is more related to the protein conformation than the primary sequence. Another isomerization site was identified as Asp-24 in the heavy chain peptide H5 QAPGQGLEWMGWINTYTGETTYAD(24)DFK. No other isomerizations were detected in CDR peptides containing either Asp-Ser or Asp-Thr motifs.

Effect of Ionic Strength and pH on the Physical and Chemical Stability of a Monoclonal Antibody Antigen-Binding Fragment

Monoclonal antibody (mAb) fragments are emerging as promising alternatives to full-length mAbs as protein therapeutic candidates. Antigen-binding fragments (Fabs) are the most advanced with three Fab-based drug products currently approved. This work presents preformulation characterization data on the effect of pH, NaCl concentration, and various cationic excipients on the physical and chemical stability of a Fab molecule with multiple negatively charged Asp residues in the complementarity-determining region. Conformational stability was evaluated using an empirical phase diagram approach based on circular dichroism, intrinsic Trp and extrinsic 8-anilino-1-naphthalene sulfonate (ANS) fluorescence, and static light scattering measurements. The effect of NaCl concentration, various cationic excipients and pH on the Fab molecules conformational stability, aggregation propensity, and chemical stability (Asp isomerization) was determined by differential scanning calorimetry, optical density measurements at 350 nm (OD350 ), and ion-exchange chromatography, respectively. Increasing NaCl concentration increased the overall conformational stability, decreased aggregation rates, and lowered the rates of Asp isomerization. No such trends were noted for pH or cationic excipients. The potential interrelationships between protein conformational and chemical stability are discussed in the context of designing stable protein formulations.

Rapid identification of low level glycation sites in recombinant antibodies by isotopic labeling with 13C6-reducing sugars.

Recombinant antibodies exhibit low levels of glycation from exposure to reducing sugars during production. As the glycation sites are typically distributed across the entire antibody, the levels at any one site are low and it becomes difficult to detect them in the conventional peptide maps. A model antibody was subjected to forced glycation by incubating with a high concentration of a 1:1 mixture of (12)C(6)/(13)C(6) reducing sugars with the assumption that the same sites in the native antibody will be glycated but to a lower extent. This approach simplified the detection of glycated tryptic peptide elution in the LC/MS analysis by giving a unique signature of two molecular ions with equal intensity and differing by 6.018 Da. An in-house developed script automatically processed large data files to generate a list of such peptide mass pairs. The high mass accuracy of the Orbitrap allowed us to assign the sequences unambiguously by comparison with all possible glycated peptide masses. This sequence list was subsequently used to verify their presence/absence in the digest of the native antibody. This work flow enabled rapid and confident identification of site-specific glycation even when levels are below 0.5%. We found the glycation sites to be distributed across the entire antibody studied.

Isomerization of Asp–Asp Motif in Model Peptides and a Monoclonal Antibody Fab Fragment

Isomerization of aspartyl (Asp or D) residues is a critical degradation route to consider for stable monoclonal antibody formulations. Among the known hotspot sequences, the DD motif is relatively understudied. To gain mechanistic insights, we used model hexapeptides, YADXFK, YADDXK, and DIDDDM, as surrogates for the hotspots in a Fab protein (YADDFK and DIDDDM), to characterize the rate-pH profile of Asp isomerization. Compared with the YADGFK peptide, isomerization of D3 (the first D in the DD pair) in YADDFK was highly pH dependent. Comparison of rate-pH profiles of YADDFK, YADNFK, and YADHFK revealed a charge effect of the n + 1 residue-isomerization rate is accelerated by the positive side chain and reduced by negative side chain at n + 1 residue. Studies on YADDFK, YADDAK, and YADDGK indicated a mutual impact of D3 and D4 on their respective isomerization rates through charge effect. Comparison of rate-pH profile of DIDDDM sequence in peptide models with that in the complementary determining region of the Fab showed a faster rate in the Fab than in peptides, presumably because of contribution from structural factors in the former.

Conformational Destabilization of Immunoglobulin G Increases the Low pH Binding Affinity with the Neonatal Fc Receptor.

Crystallographic evidence suggests that the pH-dependent affinity of IgG molecules for the neonatal Fc receptor (FcRn) receptor primarily arises from salt bridges involving IgG histidine residues, resulting in moderate affinity at mildly acidic conditions. However, this view does not explain the diversity in affinity found in IgG variants, such as the YTE mutant (M252Y,S254T,T256E), which increases affinity to FcRn by up to 10×. Here we compare hydrogen exchange measurements at pH 7.0 and pH 5.5 with and without FcRn bound with surface plasmon resonance estimates of dissociation constants and FcRn affinity chromatography. The combination of experimental results demonstrates that differences between an IgG and its cognate YTE mutant vary with their pH-sensitive dynamics prior to binding FcRn. The conformational dynamics of these two molecules are nearly indistinguishable upon binding FcRn. We present evidence that pH-induced destabilization in the CH2/3 domain interface of IgG increases binding affinity by breaking intramolecular H-bonds and increases side-chain adaptability in sites that form intermolecular contacts with FcRn. Our results provide new insights into the mechanism of pH-dependent affinity in IgG-FcRn interactions and exemplify the important and often ignored role of intrinsic conformational dynamics in a protein ligand, to dictate affinity for biologically important receptors.

Identification of Asp Isomerization in Proteins by 18 O Labeling and Tandem Mass Spectrometry

Isomerization of aspartic acid (Asp) to isoaspartic acid (isoAsp) via succinimide intermediate is a common route of degradation for proteins that can affect their structural integrity. As Asp/isoAsp is isobaric in mass, it is difficult to identify the site of modification by LC-MS/MS peptide mapping. Here, we describe an approach to label the Asp residue involved in isomerization at the protein level by hydrolyzing the succinimide intermediate in H₂¹⁸O. Tryptic digestion of this labeled protein will result in peptides containing the site of isomerization being 2 Da heavier than the ¹⁶O-containing counterparts, due to ¹⁸O incorporation during the hydrolysis process. Comparison of tandem mass spectra of isomerized peptides with and without ¹⁸O incorporation allows easy identification of the Asp residue involved. This method proved to be especially useful in identifying the sites when isomerization occurs in Asp-Asp motifs.

Non-canonical reader modules of BAZ1A promote recovery from DNA damage

Members of the ISWI family of chromatin remodelers mobilize nucleosomes to control DNA accessibility and, in some cases, are required for recovery from DNA damage. However, it remains poorly understood how the non-catalytic ISWI subunits BAZ1A and BAZ1B might contact chromatin to direct the ATPase SMARCA5. Here, we find that the plant homeodomain of BAZ1A, but not that of BAZ1B, has the unusual function of binding DNA. Furthermore, the BAZ1A bromodomain has a non-canonical gatekeeper residue and binds relatively weakly to acetylated histone peptides. Using CRISPR-Cas9-mediated genome editing we find that BAZ1A and BAZ1B each recruit SMARCA5 to sites of damaged chromatin and promote survival. Genetic engineering of structure-designed bromodomain and plant homeodomain mutants reveals that reader modules of BAZ1A and BAZ1B, even when non-standard, are critical for DNA damage recovery in part by regulating ISWI factors loading at DNA lesions and supporting transcriptional programs required for survival.ISWI chromatin remodelers regulate DNA accessibility and have been implicated in DNA damage repair. Here, the authors uncover functions, in response to DNA damage, for the bromodomain of the ISWI subunit BAZ1B and for the non-canonical PHD and bromodomain modules of the paralog BAZ1A.