Jeong-Bong Yoon

Comparative study on the corrosion behavior of the cold rolled and hot rolled low-alloy steels containing copper and antimony in flue gas desulfurization environment

The correlation between the corrosion and microstructual characteristics of cold rolled and hot rolled low-alloy steels containing copper and antimony was established. The corrosion behavior of the specimens used in flue gas desulfurization systems was examined by electrochemical and weight loss measurements in an aggressive solution of 16.9 vol % H2SO4 + 0.35 vol % HCl at 60°C, pH 0.3. It has been shown that the corrosion rate of hot rolled steel is lower than that of cold rolled steel. The corrosion rate of cold rolled steel was increased by grain refinement, inclusion formation, and preferred grain orientation.

Detection and determination of solute carbon in grain interior to correlate with the overall carbon content and grain size in ultra-low-carbon steel.

In this study, every effort was exerted to determine and accumulate data to correlate microstructural and compositional elements in ultra-low-carbon (ULC) steels to variation of carbon content (12-44 ppm), manganese (0.18-0.36%), and sulfur (0.0066-0.001%). Quantitative analysis of the ULC steel using optical microscope, scanning electron microscope, transmission electron microscope, and three-dimensional atom probe revealed the decrease of grain size and dislocation density with the increase of carbon contents and/or increase of the final delivery temperature. For a given carbon content, the grain interior carbon concentration increases as the grain size increases.