Jeonghyo Kim

A plasmon-assisted fluoro-immunoassay using gold nanoparticle-decorated carbon nanotubes for monitoring the influenza virus

A plasmon-assisted fluoro-immunoassay (PAFI) was developed for the detection of the influenza virus by using Au nanoparticle (Au NP)-decorated carbon nanotubes (AuCNTs) that were synthesized using phytochemical composites at room temperature in deionized water. Specific antibodies (Abs) against the influenza virus were conjugated onto the surface of AuCNTs and cadmium telluride quantum dots (QDs), which had a photoluminescence intensity that varied as a function of virus concentration and a detection limit of 0.1 pg/mL for all three types of influenza viruses examined. The clinically isolated influenza viruses (A/Yokohama/110/2009 (H3N2)) were detected in the range of 50-10,000 PFU/mL, with a detection limit of 50 PFU/mL. From a series of proof-of-concept and clinical experiments, the developed PAFI biosensing system provided robust signal production and enhancement, as well as an excellent selectivity and sensitivity for influenza viruses. This nanoparticle-based technique could be potentially developed as an efficient detection platform for the influenza virus.

Dual-Mode SERS-Fluorescence Immunoassay Using Graphene Quantum Dot Labeling on One-Dimensional Aligned Magnetoplasmonic Nanoparticles.

A novel dual-mode immunoassay based on surface-enhanced Raman scattering (SERS) and fluorescence was designed using graphene quantum dot (GQD) labels to detect a tuberculosis (TB) antigen, CFP-10, via a newly developed sensing platform of linearly aligned magnetoplasmonic (MagPlas) nanoparticles (NPs). The GQDs were excellent bilabeling materials for simultaneous Raman scattering and photoluminescence (PL). The one-dimensional (1D) alignment of MagPlas NPs simplified the immunoassay process and enabled fast, enhanced signal transduction. With a sandwich-type immunoassay using dual-mode nanoprobes, both SERS signals and fluorescence images were recognized in a highly sensitive and selective manner with a detection limit of 0.0511 pg mL(-1).

Plasmon-induced photoluminescence immunoassay for tuberculosis monitoring using gold-nanoparticle-decorated graphene.

Metal-nanoparticle-functionalized graphene, in particular, graphene sheets containing Au nanoparticles (Au NPs), have generated considerable interest because of their unique optical and electrical characteristics. In this study, we successfully produced graphene sheets decorated with Au NPs (AuGrp) using phytochemicals as reducing agents. During this reaction, Au ions intercalated into the layered graphene flakes and were then reduced into NPs, exfoliating the graphene sheets. The physicochemical properties of the AuGrp nanocomposites were characterized, and the exfoliation process was investigated using a molecular dynamics simulation of Au NPs between graphene sheets. Our proposed technique is advantageous because the phytochemicals are mild reducing agents that preserve the graphene structure during exfoliation and NP decoration. The dispersity of the NPs on the graphene sheets was drastically improved due to the use of metal-ion intercalation. Moreover, the electrical conductivity was 6-30 times higher than that of bare graphene and reduced graphene oxide. Using antibody (Ab) modified AuGrp sheets and quantum dots, a plasmonic-induced photoluminescence immunoassay of tuberculosis (TB) antigen (aG) CFP-10 was demonstrated for a potential application of these materials. The enhancement of photoluminescence (PL) response was monitored depending on the various TB aG concentrations from 5.1 pg/mL to 51 μg/mL, and the detection limit for CFP-10 was 4.5 pg/mL. Furthermore, the selectivity was demonstrated with Ag85 as the other TB aG, and PL enhancement was not observed in this case. Therefore, AuGrp-based immunoassay showed the potential for biosensor application.

In situ self-assembly of gold nanoparticles on hydrophilic and hydrophobic substrates for influenza virus-sensing platform

Nanomaterials without chemical linkers or physical interactions that reside on a two-dimensional surface are attractive because of their electronic, optical and catalytic properties. An in situ method has been developed to fabricate gold nanoparticle (Au NP) films on different substrates, regardless of whether they are hydrophilic or hydrophobic surfaces, including glass, 96-well polystyrene plates, and polydimethylsiloxane (PDMS). A mixture of sodium formate (HCOONa) and chloroauric acid (HAuCl4) solution was used to prepare Au NP films at room temperature. An experimental study of the mechanism revealed that film formation is dependent on surface wettability and inter particle attraction. The as-fabricated Au NP films were further applied to the colorimetric detection of influenza virus. The response to the commercial target, New Caledonia/H1N1/1999 influenza virus, was linear in the range from 10 pg/ml to 10 μg/ml and limit of detection was 50.5 pg/ml. In the presence of clinically isolated influenza A virus (H3N2), the optical density of developed color was dependent on the virus concentration (10–50,000 PFU/ml). The limit of detection of this study was 24.3 PFU/ml, a limit 116 times lower than that of conventional ELISA (2824.3 PFU/ml). The sensitivity was also 500 times greater than that of commercial immunochromatography kits.

Simple and Cost-Effective Fabrication of Highly Flexible, Transparent Superhydrophobic Films with Hierarchical Surface Design

Optical transparency and mechanical flexibility are both of great importance for significantly expanding the applicability of superhydrophobic surfaces. Such features make it possible for functional surfaces to be applied to various glass-based products with different curvatures. In this work, we report on the simple and potentially cost-effective fabrication of highly flexible and transparent superhydrophobic films based on hierarchical surface design. The hierarchical surface morphology was easily fabricated by the simple transfer of a porous alumina membrane to the top surface of UV-imprinted polymeric micropillar arrays and subsequent chemical treatments. Through optimization of the hierarchical surface design, the resultant superhydrophobic films showed superior surface wetting properties (with a static contact angle of >170° and contact angle hysteresis of <3.5°) in the Cassie-Baxter wetting regime, considerable dynamic water repellency (with perfect bouncing of a water droplet dropped from an impact height of 30 mm), and good optical transparency (>82% at 550 nm wavelength). The superhydrophobic films were also experimentally found to be robust without significant degradation in the superhydrophobicity, even under repetitive bending and pressing for up to 2000 cycles. Finally, the practical usability of the proposed superhydorphobic films was clearly demonstrated by examining the antiwetting performance in real time while pouring water on the film and submerging the film in water.

Recent tuberculosis diagnosis toward the end TB strategy.

Tuberculosis (TB) is an infectious bacterial disease caused by Mycobacterium tuberculosis. Despite global TB eradication efforts, it is still a global public health concern, especially in low- and middle-income countries. Most of the active TB infections are curable with early diagnosis and appropriate treatment, but drug-resistant TB is difficult and expensive to treat in immunocompetent as well as immunocompromised individuals. Thus, rapid, economic, and accurate point-of care tools for TB diagnosis are required urgently. This review describes the history of M. tuberculosis detection methods up to date and the recent advances using nanotechnology for point-of-care testing of TB diagnosis.

Detection of influenza virus using peroxidase‐mimic of gold nanoparticles

A modified enzyme-linked immunosorbent assay (ELISA) with nanomaterials is an effective and powerful method to amplify the signal and reduce the cost of detecting and measuring trace biomarkers or proteins. In this study, an ultra-sensitive colorimetric immunoassay was designed, and its ability to detect influenza viruses using positively charged gold nanoparticles ((+)Au NPs) was assessed as a possible role for peroxidase-mimic inorganic enzymes. This method detected influenza virus A (H1N1) with a linear range up to 10 pg mL(-1) and clinically isolated influenza virus A (H3N2) up to 10 plaque forming units (PFU) mL(-1) , where its sensitivity improved to 500-fold higher than that of commercial virus kits. The sensitivity of this proposed method was not declined even though in complex biological media in compared to conventional ELISA. These results revealed that the (+)AuNP-based colorimetric immunoassay could be suitable for lab-on-a-chip device and open new opportunities for clinical protein diagnostics. Biotechnol. Bioeng. 2016;113: 2298-2303.

Metal nanowire percolation micro-grids embedded in elastomers for stretchable and transparent conductors

Next-generation stretchable optoelectronics require functional electric conductors with mechanical stretchability and optical transparency. We present a new class of highly stretchable and transparent conductors based on silver nanowire (AgNW) percolation micro-grids embedded in an elastomeric substrate. These are prepared by simple spray-coating and subsequent adhesive-tape-assisted contact-removal of AgNWs. The synergistic combination of the percolated NWs and regular micro-grid geometry in an integrated form makes it possible to achieve uniform, reproducible, and predictable performance of the resulting AgNW micro-grids and ensure good stretchability. The fabricated device shows superior optoelectronic performance with a sheet resistance of 26.1 Ω sq−1 and an optical transmittance of 85.8%. In addition, the device can reversibly accommodate various mechanical deformations, such as stretching, bending, and twisting.

Magnetic-Assembly Mechanism of Superparamagneto-Plasmonic Nanoparticles on a Charged Surface

One-dimensional magnetoplasmonic nanochains (MPNCs) were self-assembled using Au-coated Fe3O4 core-shell superparamagnetic nanoparticles (Fe3O4@Au NPs) by applying an external static magnetic field. The assembly mechanism of the Fe3O4@Au NPs was investigated thoroughly, revealing that substrate-particle interactions, van der Waals forces, and magnetic forces play important roles in the formation and control of the MPNCs. Magnetic force microscopy (MFM) and vibrating sample magnetometry (VSM) were used to study the magnetic properties of the MPNCs, which were compared with those of Fe3O4 nanochains.

Early detection of the growth of Mycobacterium tuberculosis using magnetophoretic immunoassay in liquid culture

Tuberculosis (TB) is an often neglected, epidemic disease that remains to be controlled by contemporary techniques of medicine and biotechnology. In this study, a nanoscale sensing system, referred to as magnetophoretic immunoassay (MPI) was designed to capture culture filtrate protein (CFP)-10 antigens effectively using two different types of nanoparticles (NPs). Two specific monoclonal antibodies against CFP-10 antigen were used, including gold NPs for signaling and magnetic particles for separation. These results were carefully compared with those obtained using the commercial mycobacteria growth indicator tube (MGIT) test via 2 sequential clinical tests (with ca. 260 clinical samples). The sensing linearity of MPI was shown in the range of pico- to micromoles and the detection limit was 0.3pM. MPI using clinical samples shows robust and reliable sensing while monitoring Mycobacterium tuberculosis (MTB) growth with monitoring time 3-10 days) comparable to that with the MGIT test. Furthermore, MPI distinguished false-positive samples from MGIT-positive samples, probably containing non-tuberculous mycobacteria. Thus, MPI shows promise in early TB diagnosis.