Jeremy G. Baldwin

In vitro pre-vascularisation of tissue-engineered constructs A co-culture perspective

In vitro pre-vascularization is one of the main vascularization strategies in the tissue engineering field. Culturing cells within a tissue-engineered construct (TEC) prior to implantation provides researchers with a greater degree of control over the fate of the cells. However, balancing the diverse range of different cell culture parameters in vitro is seldom easy and in most cases, especially in highly vascularized tissues, more than one cell type will reside within the cell culture system. Culturing multiple cell types in the same construct presents its own unique challenges and pitfalls. The following review examines endothelial-driven vascularization and evaluates the direct and indirect role other cell types have in vessel and capillary formation. The article then analyses the different parameters researchers can modulate in a co-culture system in order to design optimal tissue-engineered constructs to match desired clinical applications.

Biofabrication of customized bone grafts by combination of additive manufacturing and bioreactor knowhow

This study reports on an original concept of additive manufacturing for the fabrication of tissue engineered constructs (TEC), offering the possibility of concomitantly manufacturing a customized scaffold and a bioreactor chamber to any size and shape. As a proof of concept towards the development of anatomically relevant TECs, this concept was utilized for the design and fabrication of a highly porous sheep tibia scaffold around which a bioreactor chamber of similar shape was simultaneously built. The morphology of the bioreactor/scaffold device was investigated by micro-computed tomography and scanning electron microscopy confirming the porous architecture of the sheep tibiae as opposed to the non-porous nature of the bioreactor chamber. Additionally, this study demonstrates that both the shape, as well as the inner architecture of the device can significantly impact the perfusion of fluid within the scaffold architecture. Indeed, fluid flow modelling revealed that this was of significant importance for controlling the nutrition flow pattern within the scaffold and the bioreactor chamber, avoiding the formation of stagnant flow regions detrimental for in vitro tissue development. The bioreactor/scaffold device was dynamically seeded with human primary osteoblasts and cultured under bi-directional perfusion for two and six weeks. Primary human osteoblasts were observed homogenously distributed throughout the scaffold, and were viable for the six week culture period. This work demonstrates a novel application for additive manufacturing in the development of scaffolds and bioreactors. Given the intrinsic flexibility of the additive manufacturing technology platform developed, more complex culture systems can be fabricated which would contribute to the advances in customized and patient-specific tissue engineering strategies for a wide range of applications.

Sustained regeneration of high-volume adipose tissue for breast reconstruction using computer aided design and biomanufacturing

Adipose tissue engineering offers a promising alternative to the current breast reconstruction options. Here we investigated patient-specific breast scaffolds fabricated from poly(d,l)-lactide polymer with pore sizes>1 mm for their potential in long-term sustained regeneration of high volume adipose tissue. An optimised scaffold geometry was modelled in silico via a laser scanning data set from a patient who underwent breast reconstruction surgery. After the design process scaffolds were fabricated using an additive manufacturing technology termed fused deposition modelling. Breast-shaped scaffolds were seeded with human umbilical cord perivascular cells and cultured under static conditions for 4 weeks and subsequently 2 weeks in a biaxial rotating bioreactor. These in vitro engineered constructs were then seeded with human umbilical vein endothelial cells and implanted subcutaneously into athymic nude rats for 24 weeks. Angiogenesis and adipose tissue formation were observed throughout all constructs at all timepoints. The percentage of adipose tissue compared to overall tissue area increased from 37.17% to 62.30% between week 5 and week 15 (p<0.01), and increased to 81.2% at week 24 (p<0.01), while the seeded endothelial cells self-organised to form a functional capillary network. The presented approach of fabricating customised scaffolds using 3D scans represents a facile approach towards engineering clinically relevant volumes of adipose tissue for breast reconstruction.

An Integrated Design, Material, and Fabrication Platform for Engineering Biomechanically and Biologically Functional Soft Tissues

We present a design rationale for stretchable soft network composites for engineering tissues that predominantly function under high tensile loads. The convergence of 3D-printed fibers selected from a design library and biodegradable interpenetrating polymer networks (IPNs) result in biomimetic tissue engineered constructs (bTECs) with fully tunable properties that can match specific tissue requirements. We present our technology platform using an exemplary soft network composite model that is characterized to be flexible, yet ∼125 times stronger (E = 3.19 MPa) and ∼100 times tougher (WExt = ∼2000 kJ m-3) than its hydrogel counterpart.

Fetal bone marrow-derived mesenchymal stem/stromal cells enhance humanization and bone formation of BMP7 loaded scaffolds†

Tissue engineered constructs built with human cells capable of generating a bone-like organ within the mouse have attracted considerable interest over the past decade. Here, we aimed to compare the utility of human mesenchymal stem/stromal cells (MSC) isolated from fetal term placenta (fPL-MSC) and fetal first trimester bone marrow (fBM-MSC) in a polycaprolactone scaffold/BMP7-based model in nude mice. Furthermore, fPL-MSC were co-seeded with fetal placenta-derived endothelial colony forming cells (ECFC) to assess the impact of ECFC on fPL-MSC osteogenesis. X-ray radiography and micro computed tomography analyses showed enhanced bone formation in all BMP7 groups; however there was no difference after 2 months in bone formation between scaffolds seeded with fPL-MSC alone or combination of ECFC and fPL-MSC. Of interest, fBM-MSC showed the highest level of bone formation. Additionally, endochondral ossification contributed in generation of bone in fBM-MSC. Histological analysis showed the primary role of BMP in generation of cortical and trabecular bone, and the recruitment of hematopoietic cells to the scaffolds. Current in vivo engineered bone organs can potentially be used for drug screening or as models to study bone tissue development in combination with haematopoiesis.

A Novel 3D Cultured Model for Studying Early Changes in Age‐Related Macular Degeneration

Various in vitro culture systems have been used to investigate the pathogenesis of age-related macular degeneration (AMD). However, many still rely on oversimplified monolayer culture models. AMD is a complex disease, associated with the pathological changes to multiple structural components such as the Bruchs membrane, retinal pigment epithelium (RPE), and choroidal endothelial cells. This study aims to construct a novel 3D coculture model using the polycaprolactone (PCL)-gelatin electrospun scaffold, with human RPE cells (hRPE) and primate choroidal cells (RF-6A). Results from this study show that PCL-gelatin scaffolds have a highly porous ultrastructure that supports the attachment, proliferation, differentiation, and migration of the hRPEs and choroidal endothelial cells. It is also demonstrated that the PCL-gelatin 3D coculture model may be useful in exploring the molecular interplay between the hPRE and the choroidal endothelial cells, and their effects on growth factor modulation, which may be important in the pathogenesis of AMD.

Comparison of Different Decalcification Methods Using Rat Mandibles as a Model

Selection of decalcification agents is an essential consideration when processing mineralized tissues because the integrity and immunohistochemical characteristics of the tissues may be affected. Here, we report results obtained from the decalcification of rat mandibles using 10% ethylenediaminetetraacetic acid (EDTA) at room temperature (RT), 10% EDTA at 37C, 5% nitric acid, and 10% formic acid at RT. Decalcification endpoints were determined by microcomputed tomography. Morphological preservation and antigenicity were evaluated by hematoxylin and eosin staining and immunohistochemistry. Decalcification of the anterior and posterior portions of the mandible took 220 and 191 hr in 10% EDTA RT, 102 and 73 hr in 10% EDTA 37C, 13.5 and 4.3 hr in 5% nitric acid, and 140 and 36 hr in 10% formic acid, respectively. Decalcification in 10% EDTA at 37C was accelerated, but 10% EDTA at RT provided optimal results for immunohistochemistry and cellular and structural details. Decalcification using 5% nitric acid was accomplished in the shortest time and exhibited good cellular and architectural morphology, whereas 10% formic acid was suboptimal with respect to tissue and cellular morphology. Despite being the slowest method, EDTA at RT is still the recommended method for decalcifying mineralized tissues; however, if rapid decalcification is needed, 5% nitric acid is the best option, yielding acceptable tissue integrity and speed.

A 3D tumor microenvironment regulates cell proliferation, peritoneal growth and expression patterns

Peritoneal invasion through the mesothelial cell layer is a hallmark of ovarian cancer metastasis. Using tissue engineering technologies, we recreated an ovarian tumor microenvironment replicating this aspect of disease progression. Ovarian cancer cell-laden hydrogels were combined with mesothelial cell-layered melt electrospun written scaffolds and characterized with proliferation and transcriptomic analyses and used as intraperitoneal xenografts. Here we show increased cancer cell proliferation in these 3D co-cultures, which we validated using patient-derived cells and linked to peritoneal tumor growth in vivo. Transcriptome-wide expression analysis identified IGFBP7, PTGS2, VEGFC and FGF2 as bidirectional factors deregulated in 3D co-cultures compared to 3D mono-cultures, which we confirmed by immunohistochemistry of xenograft and patient-derived tumor tissues and correlated with overall and progression-free survival. These factors were further increased upon expression of kallikrein-related proteases. This clinically predictive model allows us to mimic the complexity and processes of the metastatic disease that may lead to therapies that protect from peritoneal invasion or delay the development of metastasis.