Jiajie Pei

Producing air-stable monolayers of phosphorene and their defect engineering

It has been a long-standing challenge to produce air-stable few- or monolayer samples of phosphorene because thin phosphorene films degrade rapidly in ambient conditions. Here we demonstrate a new highly controllable method for fabricating high quality, air-stable phosphorene films with a designated number of layers ranging from a few down to monolayer. Our approach involves the use of oxygen plasma dry etching to thin down thick-exfoliated phosphorene flakes, layer by layer with atomic precision. Moreover, in a stabilized phosphorene monolayer, we were able to precisely engineer defects for the first time, which led to efficient emission of photons at new frequencies in the near infrared at room temperature. In addition, we demonstrate the use of an electrostatic gate to tune the photon emission from the defects in a monolayer phosphorene. This could lead to new electronic and optoelectronic devices, such as electrically tunable, broadband near infrared lighting devices operating at room temperature.

Robust Excitons and Trions in Monolayer MoTe2.

Molybdenum telluride (MoTe2) has emerged as a special member in the family of two-dimensional transition metal dichalcogenide semiconductors, owing to the strong spin-orbit coupling and relatively small energy gap, which offers new applications in valleytronic and excitonic devices. Here we successfully demonstrated the electrical modulation of negatively charged (X(-)), neutral (X(0)), and positively charged (X(+)) excitons in monolayer MoTe2 via photoluminescence spectroscopy. The binding energies of X(+) and X(-) were measured to be ∼24 and ∼27 meV, respectively.The exciton binding energy of monolayer MoTe2 was measured to be 0.58 ± 0.08 eV via photoluminescence excitation spectroscopy, which matches well with our calculated value of 0.64 eV.

Extraordinarily Bound Quasi-One-Dimensional Trions in Two-Dimensional Phosphorene Atomic Semiconductors

We report a trion (charged exciton) binding energy of ∼162 meV in few-layer phosphorene at room temperature, which is nearly 1-2 orders of magnitude larger than those in two-dimensional (2D) transition metal dichalcogenide semiconductors (20-30 meV) and quasi-2D quantum wells (∼1-5 meV). Such a large binding energy has only been observed in truly one-dimensional (1D) materials such as carbon nanotubes, whose optoelectronic applications have been severely hindered by their intrinsically small optical cross sections. Phosphorene offers an elegant way to overcome this hurdle by enabling quasi-1D excitonic and trionic behaviors in a large 2D area, allowing optoelectronic integration. We experimentally validated the quasi-1D nature of excitonic and trionic dynamics in phospherene by demonstrating completely linearly polarized light emission from excitons and trions in few-layer phosphorene. The implications of the extraordinarily large trion binding energy in a higher-than-one-dimensional material are far-reaching. It provides a room-temperature 2D platform to observe the fundamental many-body interactions in the quasi-1D region.

Manipulation of photoluminescence of two-dimensional MoSe2 by gold nanoantennas

Monolayer molybdenum diselenide (MoSe2), a member of the TMDCs family, is an appealing candidate for coupling to gold plasmonic nanostructures as it has smaller bandgap and higher electron mobility in comparison to frequently studied molybdenum disulfide (MoS2). The PL of MoSe2 occurs in the near-infrared spectral range where the emissive properties do not suffer from the enhanced dissipation in the gold due to inter-band transitions. Here, we study the interaction between monolayer MoSe2 and plasmonic dipolar antennas in resonance with the PL emission of MoSe2. By varying the thickness of the spacer between the MoSe2 layer and nanoantenna, we demonstrate manipulation of the PL intensity from nearly fourfold quenching to approximately threefold enhancement. Furthermore, we show that the coupled TMDC-nanoantenna system exhibits strong polarization-dependent PL, thus offering the possibility of polarization-based emission control. Our experimental results are supported by numerical simulations as well. To the best of our knowledge, this is the first study of Au-MoSe2 plasmonic hybrid structures realizing flexible PL manipulation.

Layer-dependent surface potential of phosphorene and anisotropic/layer-dependent charge transfer in phosphorene–gold hybrid systems

The surface potential and the efficiency of interfacial charge transfer are extremely important for designing future semiconductor devices based on the emerging two-dimensional (2D) phosphorene. Here, we directly measured the strong layer-dependent surface potential of mono- and few-layered phosphorene on gold, which is consistent with the reported theoretical prediction. At the same time, we used an optical way photoluminescence (PL) spectroscopy to probe charge transfer in the phosphorene-gold hybrid system. We firstly observed highly anisotropic and layer-dependent PL quenching in the phosphorene-gold hybrid system, which is attributed to the highly anisotropic/layer-dependent interfacial charge transfer.

Exciton and Trion Dynamics in Bilayer MoS2

The control of exciton and triondynamics in bilayer MoS2 is demonstrated, via the comodulations by both temperature and electric field. The calculations here show that the band structure of bilayer MoS2 changes from indirect at room temperature toward direct nature as temperature decreases, which enables the electrical tunability of the K-K direct PL transition in bilayer MoS2 at low temperature.

Exciton Brightening in Monolayer Phosphorene via Dimensionality Modification

Exciton brightening in monolayer phosphorene is achieved via the dimensionality modification of excitons from quasi-1D to 0D. The luminescence quantum yield of 0D-like excitons is >33.6 times larger than that of quasi-1D free excitons. 2D phosphorene with quasi-1D free excitons and 0D-like excitons provides a unique platform to investigate the fundamental phenomena in the ideal 2D-1D-0D hybrid system.

Strongly enhanced photoluminescence in nanostructured monolayer MoS2 by chemical vapor deposition.

Two-dimensional (2D) layered molybdenum disulfide (MoS2) has become a very promising candidate semiconducting material for future optoelectronic devices, owing to its unique properties. However, monolayer MoS2 is still a weak photon emitter, compared with other direct band gap semiconductors, which requires extra techniques or complicated steps to enhance its photon emission efficiency. Here, we demonstrated that nanostructured monolayer MoS2, produced by one-step chemical vapor deposition (CVD) growth, shows highly enhanced PL emission. The effective enhancement factor could be up to ∼43. Our results open the door to manipulating the optical properties of future devices by using nanostructured 2D monolayers.

Excited state biexcitons in atomically thin MoSe2

The tightly bound biexcitons found in atomically thin semiconductors have very promising applications for optoelectronic and quantum devices. However, there is a discrepancy between theory and experiment regarding the fundamental structure of these biexcitons. Therefore, the exploration of a biexciton formation mechanism by further experiments is of great importance. Here, we successfully triggered the emission of biexcitons in atomically thin MoSe2, via the engineering of three critical parameters: dielectric screening, density of trions, and excitation power. The observed binding energy and formation dynamics of these biexcitons strongly support the model that the biexciton consists of a charge attached to a trion (excited state biexciton) instead of four spatially symmetric particles (ground state biexciton). More importantly, we found that the excited state biexcitons not only can exist at cryogenic temperatures but also can be triggered at room temperature in a freestanding bilayer MoSe2. The demonstrated capability of biexciton engineering in atomically thin MoSe2 provides a route for exploring fundamental many-body interactions and enabling device applications, such as bright entangled photon sources operating at room temperature.

Elastic and Inelastic Light–Matter Interactions in 2D Materials

Two-dimensional (2D) materials such as graphene, transition metal dichalcogenides and phosphorene have emerged as brand new photonic materials with huge potential in a variety of optical applications in recent years, due to their unique properties and multiple functions. Owning to the significantly increased surface to volume ratio in the atomic thin layered structure, the interactions between 2D materials with light become remarkably strong in either elastic or inelastic interactions. Most of previous studies were focused on the inelastic interactions between 2D materials with light, namely Raman and photoluminescence properties. However, we found the elastic interactions between them and light are also very attractive. Based on the properties discovered, we demonstrated several optical applications, such as atomically thin optical lenses and gratings. On the other hand, we found the inelastic interactions with light in the 2D limitation affected a lot by the external environment, which could serve as a unique method to control the working status of the optical devices to meet multiple application needs. Several progresses were demonstrated such as control of excitons and trions in few-layer MoS2 via the co-modulations by both temperature and electric field and the defect engineering by oxygen plasma etching to stimulate new photon emission.